main
Ray
Publish 0.1.0
d3a42b6
XRIM322512S2R2MBCA
XR · Power Inductors · 1210
XRIM322512S2R2MBCA from XR, in a 1210. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised inductor or ferrite bead; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised inductor or ferrite bead; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XR |
| Package | 1210 |
| Category | Inductors, Coils, Chokes |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Inductance tolerance (code M) | -20 | 20 | % | Tolerance code M = ±20% (part-numbering table) | 2 | ||
| DC resistance Rdc | Rdc | 58 | 70 | mΩ | 3 | ||
| Heating rating current Irms | Irms | 3.6 | 3 | A | DC current causing approx. ΔT of 40 °C (Note 3); max value printed as 3.0 (below typ, as printed) | 3 | |
| Saturation current Isat | Isat | 4.6 | 4.2 | A | DC current causing L0 to drop approx. 30% (Note 4) | 3 | |
| Insulation resistance | 100 | MΩ | 100 VDC between inductor coil and middle of top surface of body for 60 s | 4 | |||
| Inductance change, temperature characteristic | -10 | 10 | % | Steps +20 °C (30 |
4 | ||
| Inductance change, resistance to soldering heat | -10 | 10 | % | Sn/Ag3.0/Cu0.5 solder at 260±5 °C, immersion 10±1 s | 4 | ||
| Inductance change, high temperature | -10 | 10 | % | 125±2 °C, 1000 h; measured at 24±4 h after test | 4 | ||
| Inductance change, low temperature | -10 | 10 | % | -55±2 °C, 1000 h; measured at 24±4 h after test | 4 | ||
| Inductance change, thermal shock | -10 | 10 | % | -55±3 °C and 125±3 °C, 32 cycles | 4 | ||
| Inductance change, static humidity | -10 | 10 | % | 95±3 %RH at 60±2 °C, 1000±4 h | 4 | ||
| Inductance change, life | -10 | 10 | % | Stored at 85±2 °C, 1000±4 h with Irms applied | 4 | ||
| Operating temperature range | -55 | 125 | °C | Operating temperature range (Note 5) | 3 | ||
| Part temperature (ambient + temperature rise) | 125 | °C | Worst-case operating conditions; ambient plus temperature rise should not exceed (Note 6) | 3 | |||
| Inductance L0 | L0 | 2.2 | µH | 1 MHz, 1.0 Vrms (Note 2); 25 °C ambient (Note 1) | 3 |
CAD (KiCad official)
- Symbol:
XRIM322512S2R2MBCA - Footprint:
Inductor_SMD:L_1210_3225Metric - 3D model: 1210 (KiCad packages3D, STEP)
- 3D model files:
xrim322512s2r2mbca-etched.step/xrim322512s2r2mbca-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xrim322512s2r2mbca.step/xrim322512s2r2mbca.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XR datasheet (6 pp, sha256
141d0e96c8222433, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins, primarytwo-terminal convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# XRIM322512S2R2MBCA
**XR** · Power Inductors · 1210
XRIM322512S2R2MBCA from XR, in a 1210. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised inductor or ferrite bead; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised inductor or ferrite bead; either orientation. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XR |
| Package | 1210 |
| Category | Inductors, Coils, Chokes |
| Pins | 2 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Inductance tolerance (code M) | | -20 | | 20 | % | Tolerance code M = ±20% (part-numbering table) | 2 |
| DC resistance Rdc | Rdc | | 58 | 70 | mΩ | | 3 |
| Heating rating current Irms | Irms | | 3.6 | 3 | A | DC current causing approx. ΔT of 40 °C (Note 3); max value printed as 3.0 (below typ, as printed) | 3 |
| Saturation current Isat | Isat | | 4.6 | 4.2 | A | DC current causing L0 to drop approx. 30% (Note 4) | 3 |
| Insulation resistance | | 100 | | | MΩ | 100 VDC between inductor coil and middle of top surface of body for 60 s | 4 |
| Inductance change, temperature characteristic | | -10 | | 10 | % | Steps +20 °C (30~45) → -40 °C (30~45) → +20 °C (30~45) → +125 °C (30~45) → +20 °C (30~45); Pc-b, Pc-d | 4 |
| Inductance change, resistance to soldering heat | | -10 | | 10 | % | Sn/Ag3.0/Cu0.5 solder at 260±5 °C, immersion 10±1 s | 4 |
| Inductance change, high temperature | | -10 | | 10 | % | 125±2 °C, 1000 h; measured at 24±4 h after test | 4 |
| Inductance change, low temperature | | -10 | | 10 | % | -55±2 °C, 1000 h; measured at 24±4 h after test | 4 |
| Inductance change, thermal shock | | -10 | | 10 | % | -55±3 °C and 125±3 °C, 32 cycles | 4 |
| Inductance change, static humidity | | -10 | | 10 | % | 95±3 %RH at 60±2 °C, 1000±4 h | 4 |
| Inductance change, life | | -10 | | 10 | % | Stored at 85±2 °C, 1000±4 h with Irms applied | 4 |
| Operating temperature range | | -55 | | 125 | °C | Operating temperature range (Note 5) | 3 |
| Part temperature (ambient + temperature rise) | | | | 125 | °C | Worst-case operating conditions; ambient plus temperature rise should not exceed (Note 6) | 3 |
| Inductance L0 | L0 | | 2.2 | | µH | 1 MHz, 1.0 Vrms (Note 2); 25 °C ambient (Note 1) | 3 |
## CAD (KiCad official)
- Symbol: `XRIM322512S2R2MBCA`
- Footprint: `Inductor_SMD:L_1210_3225Metric`
- 3D model: 1210 (KiCad packages3D, STEP)
- 3D model files: `xrim322512s2r2mbca-etched.step` / `xrim322512s2r2mbca-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `xrim322512s2r2mbca.step` / `xrim322512s2r2mbca.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [XR datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603350799699628032) (6 pp, sha256 `141d0e96c8222433`, retrieved 2026-10-18, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins`, primary `two-terminal convention` (convention), consensus `off` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/xrim322512s2r2mbca-datasheet.pdf)