component
XRIM252012SR24MBCA
Public Made by Adomby adom
XR Power Inductors, 1008. Unpolarised two-terminal part: the datasheet prints no pin numbers, so pins 1 and 2 follow the library convention, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownXRIM252012SR24MBCA
XR · Power Inductors · 1008
XRIM252012SR24MBCA from XR, in a 1008. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised inductor or ferrite bead; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised inductor or ferrite bead; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XR |
| Package | 1008 |
| Category | Inductors, Coils, Chokes |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Inductance tolerance (code M) | -20 | 20 | % | Tolerance code M = ±20% per part-numbering table | 2 | ||
| DC resistance | Rdc | 10 | 15 | mΩ | 3 | ||
| Heat rating current | Irms | 8 | 7.5 | A | DC current that causes an approximate ΔT of 40 ℃ (Note 3) | 3 | |
| Saturation current | Isat | 9.3 | 8.8 | A | DC current that causes L0 to drop approximately 30% (Note 4) | 3 | |
| Insulation resistance | 100 | MΩ | 100 VDC between coil and middle of top surface of body, 60 s | 4 | |||
| Inductance change after resistance to soldering heat | -10 | 10 | % | Solder 260±5℃, immersion 10±1 s | 4 | ||
| Inductance change after high temperature test | -10 | 10 | % | 125±2℃, 1000 h, measured 24±4 h after test | 4 | ||
| Inductance change after low temperature test | -10 | 10 | % | -55±2℃, 1000 h, measured 24±4 h after test | 4 | ||
| Inductance change after thermal shock | -10 | 10 | % | (-55±3)℃ and (125±3)℃, 32 cycles | 4 | ||
| Inductance change over temperature characteristic | -10 | 10 | % | Pc-b and Pc-d versus +20℃ reference, steps at -40℃ and +125℃ | 4 | ||
| Inductance change after static humidity | -10 | 10 | % | (95±3)%RH at (60±2)℃, 1000±4 h | 4 | ||
| Inductance change after life test | -10 | 10 | % | Stored at (85±2)℃, 1000±4 h with Irms applied | 4 | ||
| Operating temperature range | -55 | 125 | ℃ | Note 5 | 3 | ||
| Part temperature (ambient + temperature rise) | 125 | ℃ | Worst-case operating conditions (Note 6) | 3 | |||
| Allowed reflow times | 2 | times | Lead-free reflow profile | 5 | |||
| Peak reflow temperature (Tp) | Tp | 260 | ℃ | Pb-free reflow profile, time within +0/-5 ℃ of peak 10 s | 5 | ||
| Recommended storage temperature | 15 | 35 | ℃ | Recommended warehouse storage | 6 | ||
| Recommended storage humidity | 25 | 75 | %RH | Recommended warehouse storage | 6 | ||
| Inductance | L0 | 0.24 | µH | @0A, 1MHz, 1.0Vrms (Notes 1-2) | 3 |
CAD (KiCad official)
- Symbol:
XRIM252012SR24MBCA - Footprint:
Inductor_SMD:L_1008_2520Metric - 3D model: 1008 (KiCad packages3D, STEP)
- 3D model files:
xrim252012sr24mbca-etched.step/xrim252012sr24mbca-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xrim252012sr24mbca.step/xrim252012sr24mbca.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XR datasheet (6 pp, sha256
bd19387f27d66775, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins, primarytwo-terminal convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).