3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownXRCGE50M000F5A2AR0
Murata Electronics · Crystals · SMD2016-4P
XRCGE50M000F5A2AR0 from Murata Electronics, in a SMD2016-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | XTAL1 | passive | Crystal terminal (input/output) for the 50.0000MHz crystal, with no polarity; load capacitance 4.7pF, drive level max. 300μW. |
| 2 | NC | unconnected | No connect terminal, not electrically used. |
| 3 | XTAL2 | passive | Crystal terminal (input/output) for the 50.0000MHz crystal, with no polarity; load capacitance 4.7pF, drive level max. 300μW. |
| 4 | NC | unconnected | No connect terminal, not electrically used. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Murata Electronics |
| Package | SMD2016-4P |
| Category | Crystals, Oscillators, Resonators |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Frequency Tolerance (*1) | -50 | 50 | ppm | Initial frequency tolerance, max; printed ±50ppm 以内/max. | 2 | ||
| Frequency Shift by Temperature | -50 | 50 | ppm | -40 to +125°C, from initial value | 2 | ||
| Frequency aging | -20 | 20 | ppm | /10 years max. | 2 | ||
| Equivalent Series Resistance (*1) | ESR | 50 | Ω | Max; measured per item 8 circuit (*1) | 2 | ||
| Insulation Resistance (*2) | 500 | MΩ | Applied D.C.10V, between terminals (*2) | 2 | |||
| Drive Level | 300 | μW | Max. | 2 | |||
| D.C. Voltage | 6 | V | D.C. applied voltage, max. | 2 | |||
| A.C. Voltage | 15 | Vp-p | Input signal amplitude, max. | 2 | |||
| Operating Temperature Range | -40 | 125 | °C | Rating 4-1 | 2 | ||
| Storage Temperature Range | -55 | 125 | °C | Rating 4-2 | 2 | ||
| Table 1 Frequency deviation | -5 | 5 | ppm | After reflow soldering heat test (9-4(1)), from initial value | 12 | ||
| Table 2 Frequency deviation | -25 | 25 | ppm | After soldering with iron / solder dip (9-4(2),(3)), mechanical shock, vibration, board flex, terminal strength (9-1,9-2,9-3,9-6), from initial value | 12 | ||
| Table 3 Frequency deviation | -40 | 40 | ppm | After environmental tests 10-1 to 10-5 (high/low temp storage, biased humidity, temp cycling, operational life), from initial value | 12 | ||
| Table 4 Equivalent Series Resistance change | ESR | -25 | 25 | % | After tests in Tables 1-3; or 5ohm max (use larger value) | 12 | |
| Nominal Frequency | 50 | MHz | Printed 50.0000MHz | 2 | |||
| Load Capacitance (Cs) | Cs | 4.7 | pF | Printed 4.7pF (*1 measurement method per item 8) | 2 |
CAD (KiCad official)
- Symbol:
XRCGE50M000F5A2AR0 - Footprint:
Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm - 3D model: SMD2016-4P (KiCad packages3D, STEP)
- 3D model files:
xrcge50m000f5a2ar0-etched.step/xrcge50m000f5a2ar0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xrcge50m000f5a2ar0.step/xrcge50m000f5a2ar0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Murata Electronics datasheet (18 pp, sha256
46f923165526515a, retrieved 2026-10-13, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).