Generated by kicad-footprint-generator · KiCad file format 20260206
XRA1201PIG24TR-F
MaxLinear · I/O Expanders · TSSOP-24
XRA1201PIG24TR-F from MaxLinear, in a TSSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IRQ# | output | Interrupt output, open-drain and active LOW; it signals input-pin changes and requires an external pull-up. |
| 2 | A1 | input | I2C slave address select pin A1 (tied to GND or VCC, or SCL/SDA per Table 1) that sets the device address from 0x20 to 0x5E. |
| 3 | A2 | input | I2C slave address select pin A2 (tied to GND or VCC, or SCL/SDA per Table 1) that sets the device address from 0x20 to 0x5E. |
| 4 | P0 | bidirectional | General purpose I/O P0; configured as an input after power-up or reset, and its internal pull-up is enabled by default only on the XRA1201P. |
| 5 | P1 | bidirectional | General purpose I/O P1; configured as an input after power-up or reset, and its internal pull-up is enabled by default only on the XRA1201P. |
| 6 | P2 | bidirectional | General purpose I/O P2; configured as an input after power-up or reset, and its internal pull-up is enabled by default only on the XRA1201P. |
| 7 | P3 | bidirectional | General purpose I/O P3; configured as an input after power-up or reset, and its internal pull-up is enabled by default only on the XRA1201P. |
| 8 | P4 | bidirectional | General purpose I/O P4; configured as an input after power-up or reset, and its internal pull-up is enabled by default only on the XRA1201P. |
| 9 | P5 | bidirectional | General purpose I/O P5; configured as an input after power-up or reset, and its internal pull-up is enabled by default only on the XRA1201P. |
| 10 | P6 | bidirectional | General purpose I/O P6; configured as an input after power-up or reset, and its internal pull-up is enabled by default only on the XRA1201P. |
| 11 | P7 | bidirectional | General purpose I/O P7; configured as an input after power-up or reset, and its internal pull-up is enabled by default only on the XRA1201P. |
| 12 | GND | power_in | Power supply common ground. |
| 13 | P8 | bidirectional | General purpose I/O P8; configured as an input after power-up or reset, and its internal pull-up is enabled by default only on the XRA1201P. |
| 14 | P9 | bidirectional | General purpose I/O P9; configured as an input after power-up or reset, and its internal pull-up is enabled by default only on the XRA1201P. |
| 15 | P10 | bidirectional | General purpose I/O P10; configured as an input after power-up or reset, and its internal pull-up is enabled by default only on the XRA1201P. |
| 16 | P11 | bidirectional | General purpose I/O P11; configured as an input after power-up or reset, and its internal pull-up is enabled by default only on the XRA1201P. |
| 17 | P12 | bidirectional | General purpose I/O P12; configured as an input after power-up or reset, and its internal pull-up is enabled by default only on the XRA1201P. |
| 18 | P13 | bidirectional | General purpose I/O P13; configured as an input after power-up or reset, and its internal pull-up is enabled by default only on the XRA1201P. |
| 19 | P14 | bidirectional | General purpose I/O P14; configured as an input after power-up or reset, and its internal pull-up is enabled by default only on the XRA1201P. |
| 20 | P15 | bidirectional | General purpose I/O P15; configured as an input after power-up or reset, and its internal pull-up is enabled by default only on the XRA1201P. |
| 21 | A0 | input | I2C slave address select pin A0 (tied to GND or VCC, or SCL/SDA per Table 1) that sets the device address from 0x20 to 0x5E. |
| 22 | SCL | input | I2C-bus serial input clock, supporting standard mode up to 100 kbps and fast mode up to 400 kbps. |
| 23 | SDA | bidirectional | I2C-bus serial data input/output, open-drain, supporting standard mode up to 100 kbps and fast mode up to 400 kbps. |
| 24 | VCC | power_in | Supply voltage, 1.65 V to 3.6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MaxLinear |
| Package | TSSOP-24 |
| Category | Interface |
| Pins | 24 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Low Voltage (I2C SDA, SCL) | VIL | -0.3 | V | Note 1: I2C inputs SDA, SCL | 12 | ||
| Input Low Voltage (GPIOs, A0-A2) | VIL | -0.3 | 0.2 | V | Note 2: GPIOs, A0, A1, A2; VCC 1.8V 10% | 12 | |
| Input Low Voltage (GPIOs, A0-A2) | VIL | -0.3 | 0.5 | V | Note 2: GPIOs, A0, A1, A2; VCC 2.5V 10% | 12 | |
| Input Low Voltage (GPIOs, A0-A2) | VIL | -0.3 | 0.8 | V | Note 2: GPIOs, A0, A1, A2; VCC 3.3V 10% | 12 | |
| Input High Voltage (I2C SDA, SCL) | VIH | 1.3 | V | Note 1: I2C inputs SDA, SCL; VCC 1.8V 10% | 12 | ||
| Input High Voltage (I2C SDA, SCL) | VIH | 1.8 | V | Note 1: I2C inputs SDA, SCL; VCC 2.5V 10% | 12 | ||
| Input High Voltage (I2C SDA, SCL) | VIH | 2.3 | V | Note 1: I2C inputs SDA, SCL; VCC 3.3V 10% | 12 | ||
| Input High Voltage (GPIOs, A0-A2) | VIH | 1.4 | 5.5 | V | Note 2: GPIOs, A0, A1, A2; VCC 1.8V 10% | 12 | |
| Input High Voltage (GPIOs, A0-A2) | VIH | 1.8 | 5.5 | V | Note 2: GPIOs, A0, A1, A2; VCC 2.5V 10% | 12 | |
| Input High Voltage (GPIOs, A0-A2) | VIH | 2 | 5.5 | V | Note 2: GPIOs, A0, A1, A2; VCC 3.3V 10% | 12 | |
| Output Low Voltage (SDA) | VOL | 0.4 | V | IOL = 3 mA; Note 3: I2C output SDA | 12 | ||
| Output Low Voltage (GPIOs) | VOL | 0.5 | V | IOL = 8 mA; Note 4: GPIOs | 12 | ||
| Output Low Voltage (IRQ#) | VOL | 0.4 | V | IOL = 6 mA; Note 5: IRQ#; VCC 1.8V 10% | 12 | ||
| Output High Voltage (GPIOs) | VOH | 1.2 | V | IOH = -8 mA; Note 4: GPIOs; VCC 1.8V 10% | 12 | ||
| Output High Voltage (GPIOs) | VOH | 1.8 | V | IOH = -8 mA; Note 4: GPIOs; VCC 2.5V 10% | 12 | ||
| Output High Voltage (GPIOs) | VOH | 2.6 | V | IOH = -8 mA; Note 4: GPIOs; VCC 3.3V 10% | 12 | ||
| Input Low Leakage Current | IIL | -10 | 10 | uA | 12 | ||
| Input High Leakage Current | IIH | -10 | 10 | uA | 12 | ||
| Input Pin Capacitance | CIN | 5 | pF | 12 | |||
| Power Supply Current | ICC | 50 | uA | Test 1; VCC 1.8V 10% | 12 | ||
| Power Supply Current | ICC | 100 | uA | Test 1; VCC 2.5V 10% | 12 | ||
| Power Supply Current | ICC | 200 | uA | Test 1; VCC 3.3V 10% | 12 | ||
| Power Supply Current | ICC | 150 | uA | Test 2; VCC 1.8V 10% | 12 | ||
| Power Supply Current | ICC | 250 | uA | Test 2; VCC 2.5V 10% | 12 | ||
| Power Supply Current | ICC | 500 | uA | Test 2; VCC 3.3V 10% | 12 | ||
| Standby Current | ICCS | 1 | uA | Test 3; VCC 1.8V 10% | 12 | ||
| Standby Current | ICCS | 2 | uA | Test 3; VCC 2.5V 10% | 12 | ||
| Standby Current | ICCS | 5 | uA | Test 3; VCC 3.3V 10% | 12 | ||
| GPIO pull-up resistance | RGPIO | 60 | 100 | 140 | kΩ | 100kΩ ± 40% | 12 |
| GPIO pull-up resistance tolerance | RGPIO | -40 | 40 | % | Nominal 100kΩ ± 40% | 12 | |
| Operating supply voltage VCC | VCC | 1.65 | 3.6 | V | VCC range as printed in DC table header | 12 | |
| Operating temperature | TA | -40 | 85 | °C | TA range as printed in DC and AC table headers | 12 | |
| Power supply voltage | 3.6 | V | 11 | ||||
| Supply current | 160 | mA | 11 | ||||
| Ground current | 200 | mA | 11 | ||||
| External current limit of each GPIO | 25 | mA | 11 | ||||
| Total current limit for GPIO[15:8] and GPIO[7:0] | 100 | mA | 11 | ||||
| Total current limit for GPIO[15:0] | 200 | mA | 11 | ||||
| Total supply current sourced by all GPIOs | 160 | mA | 11 | ||||
| Operating Temperature | -40 | 85 | °C | 11 | |||
| Storage Temperature | -65 | 150 | °C | 11 | |||
| Power Dissipation | 200 | mW | 11 | ||||
| Thermal resistance, junction-to-ambient (24-TSSOP) | theta-ja | 84 | °C/W | Typical; margin of error ±15% | 11 | ||
| Thermal resistance, junction-to-case (24-TSSOP) | theta-jc | 16 | °C/W | Typical; margin of error ±15% | 11 | ||
| Operating frequency (fast mode) | fSCL | 0 | 400 | kHz | Fast-mode C-BUS | 13 | |
| Bus free time between STOP and START (fast mode) | TBUF | 1.3 | µs | Fast-mode C-BUS | 13 | ||
| START condition hold time (fast mode) | THD;STA | 0.6 | µs | Fast-mode C-BUS | 13 | ||
| START condition setup time (fast mode) | TSU;STA | 0.6 | µs | Fast-mode C-BUS | 13 | ||
| Data hold time (fast mode) | THD;DAT | 0 | ns | Fast-mode C-BUS | 13 | ||
| Data setup time (fast mode) | TSU;DAT | 150 | ns | Fast-mode C-BUS | 13 | ||
| Clock LOW period (fast mode) | TLOW | 1.3 | µs | Fast-mode C-BUS | 13 | ||
| Clock HIGH period (fast mode) | THIGH | 0.6 | µs | Fast-mode C-BUS | 13 | ||
| Clock/data fall time (fast mode) | TF | 300 | ns | Fast-mode C-BUS | 13 | ||
| Clock/data rise time (fast mode) | TR | 300 | ns | Fast-mode C-BUS | 13 | ||
| Pulse width of spikes tolerance (fast mode) | TSP | 50 | ns | Fast-mode C-BUS | 13 | ||
| I2C-bus GPIO output valid (fast mode) | TD1 | 0.2 | µs | Fast-mode C-BUS | 13 | ||
| I2C input pin interrupt valid (fast mode) | TD4 | 4 | µs | Fast-mode C-BUS | 13 | ||
| I2C input pin interrupt clear (fast mode) | TD5 | 4 | µs | Fast-mode C-BUS | 13 |
CAD (KiCad official)
- Symbol:
XRA1201PIG24TR-F - Footprint:
Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm - 3D model: TSSOP-24 (KiCad packages3D, STEP)
- 3D model files:
xra1201pig24tr-f-etched.step/xra1201pig24tr-f-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xra1201pig24tr-f.step/xra1201pig24tr-f.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MaxLinear datasheet (17 pp, sha256
53918b1ffff0711d, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).