component
XRA1200PIG16TR-F
Public Made by Adomby adom
MaxLinear I/O Expanders, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
XRA1200PIG16TR-F
MaxLinear · I/O Expanders · TSSOP-16
XRA1200PIG16TR-F from MaxLinear, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | input | I2C slave address select input; see Table 1 for the address map (tie to GND, VCC, SCL or SDA). |
| 2 | A1 | input | I2C slave address select input; see Table 1 for the address map (tie to GND, VCC, SCL or SDA). |
| 3 | A2 | input | I2C slave address select input; see Table 1 for the address map (tie to GND, VCC, SCL or SDA). |
| 4 | P0 | bidirectional | General purpose I/O P0, configured as an input at power-up or reset, with the internal pull-up enabled on the XRA1200P. |
| 5 | P1 | bidirectional | General purpose I/O P1, configured as an input at power-up or reset, with the internal pull-up enabled on the XRA1200P. |
| 6 | P2 | bidirectional | General purpose I/O P2, configured as an input at power-up or reset, with the internal pull-up enabled on the XRA1200P. |
| 7 | P3 | bidirectional | General purpose I/O P3, configured as an input at power-up or reset, with the internal pull-up enabled on the XRA1200P. |
| 8 | GND | power_in | Power supply common, ground. |
| 9 | P4 | bidirectional | General purpose I/O P4, configured as an input at power-up or reset, with the internal pull-up enabled on the XRA1200P. |
| 10 | P5 | bidirectional | General purpose I/O P5, configured as an input at power-up or reset, with the internal pull-up enabled on the XRA1200P. |
| 11 | P6 | bidirectional | General purpose I/O P6, configured as an input at power-up or reset, with the internal pull-up enabled on the XRA1200P. |
| 12 | P7 | bidirectional | General purpose I/O P7, configured as an input at power-up or reset, with the internal pull-up enabled on the XRA1200P. |
| 13 | IRQ# | output | Interrupt output (open-drain, active LOW). |
| 14 | SCL | input | I2C-bus serial input clock. |
| 15 | SDA | bidirectional | I2C-bus data input/output (open-drain). |
| 16 | VCC | power_in | 1.65V to 3.6V VCC supply voltage. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MaxLinear |
| Package | TSSOP-16 |
| Category | Interface ICs |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage | VCC | 3.6 | V | 10 | |||
| Supply current | 160 | mA | 10 | ||||
| Ground current | 200 | mA | 10 | ||||
| External current limit of each GPIO | 25 | mA | 10 | ||||
| Total current limit for GPIO[7:0] | 100 | mA | 10 | ||||
| Total supply current sourced by all GPIOs | 160 | mA | 10 | ||||
| Operating Temperature | -40 | 85 | °C | 10 | |||
| Storage Temperature | -65 | 150 | °C | 10 | |||
| Power Dissipation | 200 | mW | 10 | ||||
| Thermal resistance junction-ambient (16-TSSOP) | theta-ja | 105 | °C/W | Typical, margin of error ±15% | 10 | ||
| Thermal resistance junction-case (16-TSSOP) | theta-jc | 20 | °C/W | Typical, margin of error ±15% | 10 | ||
| Operating voltage | VCC | 1.65 | 3.6 | V | 1 | ||
| Operating temperature range | TA | -40 | 85 | °C | 2 | ||
| Input Low Voltage (I2C SDA, SCL) | VIL | -0.3 | V | Note 1; max 0.3VCC for all three columns | 11 | ||
| Input Low Voltage (GPIOs, A0-A2), 1.8V ±10% | VIL | -0.3 | 0.2 | V | Note 2; 1.8V ±10% | 11 | |
| Input Low Voltage (GPIOs, A0-A2), 2.5V ±10% | VIL | -0.3 | 0.5 | V | Note 2; 2.5V ±10% | 11 | |
| Input Low Voltage (GPIOs, A0-A2), 3.3V ±10% | VIL | -0.3 | 0.8 | V | Note 2; 3.3V ±10% | 11 | |
| Input High Voltage (I2C SDA, SCL), 1.8V ±10% | VIH | 1.3 | V | Note 1; 1.8V ±10%; max VCC | 11 | ||
| Input High Voltage (I2C SDA, SCL), 2.5V ±10% | VIH | 1.8 | V | Note 1; 2.5V ±10%; max VCC | 11 | ||
| Input High Voltage (I2C SDA, SCL), 3.3V ±10% | VIH | 2.3 | V | Note 1; 3.3V ±10%; max VCC | 11 | ||
| Input High Voltage (GPIOs, A0-A2), 1.8V ±10% | VIH | 1.4 | 5.5 | V | Note 2; 1.8V ±10% | 11 | |
| Input High Voltage (GPIOs, A0-A2), 2.5V ±10% | VIH | 1.8 | 5.5 | V | Note 2; 2.5V ±10% | 11 | |
| Input High Voltage (GPIOs, A0-A2), 3.3V ±10% | VIH | 2 | 5.5 | V | Note 2; 3.3V ±10% | 11 | |
| Output Low Voltage (SDA) | VOL | 0.4 | V | IOL = 3 mA; Note 3; all three columns | 11 | ||
| Output Low Voltage (GPIOs) | VOL | 0.5 | V | IOL = 8 mA; Note 4; all three columns | 11 | ||
| Output Low Voltage (IRQ#), 1.8V ±10% | VOL | 0.4 | V | IOL = 6 mA; Note 5; 1.8V ±10% | 11 | ||
| Output Low Voltage (IRQ#), 2.5V ±10% | VOL | 0.4 | V | IOL = 4 mA; Note 5; 2.5V ±10% | 11 | ||
| Output Low Voltage (IRQ#), 3.3V ±10% | VOL | 0.4 | V | IOL = 1.5 mA; Note 5; 3.3V ±10% | 11 | ||
| Output High Voltage (GPIOs), 1.8V ±10% | VOH | 1.2 | V | IOH = -8 mA; Note 4; 1.8V ±10% | 11 | ||
| Output High Voltage (GPIOs), 2.5V ±10% | VOH | 1.8 | V | IOH = -8 mA; Note 4; 2.5V ±10% | 11 | ||
| Output High Voltage (GPIOs), 3.3V ±10% | VOH | 2.6 | V | IOH = -8 mA; Note 4; 3.3V ±10% | 11 | ||
| Input Low Leakage Current | IIL | -10 | 10 | uA | all three columns | 11 | |
| Input High Leakage Current | IIH | -10 | 10 | uA | all three columns | 11 | |
| Power Supply Current, 1.8V ±10% | ICC | 50 | uA | Test 1; 1.8V ±10% | 11 | ||
| Power Supply Current, 2.5V ±10% | ICC | 100 | uA | Test 1; 2.5V ±10% | 11 | ||
| Power Supply Current, 3.3V ±10% | ICC | 200 | uA | Test 1; 3.3V ±10% | 11 | ||
| Power Supply Current, 1.8V ±10% | ICC | 150 | uA | Test 2; 1.8V ±10% | 11 | ||
| Power Supply Current, 2.5V ±10% | ICC | 250 | uA | Test 2; 2.5V ±10% | 11 | ||
| Power Supply Current, 3.3V ±10% | ICC | 500 | uA | Test 2; 3.3V ±10% | 11 | ||
| Standby Current, 1.8V ±10% | ICCS | 1 | uA | Test 3; 1.8V ±10% | 11 | ||
| Standby Current, 2.5V ±10% | ICCS | 2 | uA | Test 3; 2.5V ±10% | 11 | ||
| Standby Current, 3.3V ±10% | ICCS | 5 | uA | Test 3; 3.3V ±10% | 11 | ||
| Input Pin Capacitance | CIN | 5 | pF | all three columns | 11 | ||
| GPIO pull-up resistance | RGPIO | 60 | 100 | 140 | kΩ | 100kΩ ± 40%; all three columns | 11 |
| Operating frequency, standard mode | fSCL | 0 | 100 | kHz | Standard mode | 12 | |
| Operating frequency, fast mode | fSCL | 0 | 400 | kHz | Fast mode | 12 | |
| Bus free time between STOP and START | TBUF | 1.3 | µs | Fast mode (standard mode min 4.7) | 12 | ||
| START condition hold time | THD;STA | 0.6 | µs | Fast mode (standard mode min 4.0) | 12 | ||
| START condition setup time | TSU;STA | 0.6 | µs | Fast mode (standard mode min 4.7) | 12 | ||
| Data setup time | TSU;DAT | 150 | ns | Fast mode (standard mode min 250) | 12 | ||
| Clock LOW period | TLOW | 1.3 | µs | Fast mode (standard mode min 4.7) | 12 | ||
| Clock HIGH period | THIGH | 0.6 | µs | Fast mode (standard mode min 4.0) | 12 | ||
| Clock/data fall time | TF | 300 | ns | Fast and standard mode | 12 | ||
| Clock/data rise time | TR | 300 | ns | Fast mode (standard mode max 1000) | 12 | ||
| Pulse width of spikes tolerance | TSP | 50 | ns | Fast and standard mode | 12 | ||
| I2C-bus GPIO output valid | TD1 | 0.2 | µs | Fast and standard mode | 12 |
CAD (KiCad official)
- Symbol:
XRA1200PIG16TR-F - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
xra1200pig16tr-f-etched.step/xra1200pig16tr-f-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xra1200pig16tr-f.step/xra1200pig16tr-f.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MaxLinear datasheet (16 pp, sha256
1e65aeb45ae1c889, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# XRA1200PIG16TR-F
**MaxLinear** · I/O Expanders · TSSOP-16
XRA1200PIG16TR-F from MaxLinear, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | input | I2C slave address select input; see Table 1 for the address map (tie to GND, VCC, SCL or SDA). |
| 2 | A1 | input | I2C slave address select input; see Table 1 for the address map (tie to GND, VCC, SCL or SDA). |
| 3 | A2 | input | I2C slave address select input; see Table 1 for the address map (tie to GND, VCC, SCL or SDA). |
| 4 | P0 | bidirectional | General purpose I/O P0, configured as an input at power-up or reset, with the internal pull-up enabled on the XRA1200P. |
| 5 | P1 | bidirectional | General purpose I/O P1, configured as an input at power-up or reset, with the internal pull-up enabled on the XRA1200P. |
| 6 | P2 | bidirectional | General purpose I/O P2, configured as an input at power-up or reset, with the internal pull-up enabled on the XRA1200P. |
| 7 | P3 | bidirectional | General purpose I/O P3, configured as an input at power-up or reset, with the internal pull-up enabled on the XRA1200P. |
| 8 | GND | power_in | Power supply common, ground. |
| 9 | P4 | bidirectional | General purpose I/O P4, configured as an input at power-up or reset, with the internal pull-up enabled on the XRA1200P. |
| 10 | P5 | bidirectional | General purpose I/O P5, configured as an input at power-up or reset, with the internal pull-up enabled on the XRA1200P. |
| 11 | P6 | bidirectional | General purpose I/O P6, configured as an input at power-up or reset, with the internal pull-up enabled on the XRA1200P. |
| 12 | P7 | bidirectional | General purpose I/O P7, configured as an input at power-up or reset, with the internal pull-up enabled on the XRA1200P. |
| 13 | IRQ# | output | Interrupt output (open-drain, active LOW). |
| 14 | SCL | input | I2C-bus serial input clock. |
| 15 | SDA | bidirectional | I2C-bus data input/output (open-drain). |
| 16 | VCC | power_in | 1.65V to 3.6V VCC supply voltage. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MaxLinear |
| Package | TSSOP-16 |
| Category | Interface ICs |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage | VCC | | | 3.6 | V | | 10 |
| Supply current | | | | 160 | mA | | 10 |
| Ground current | | | | 200 | mA | | 10 |
| External current limit of each GPIO | | | | 25 | mA | | 10 |
| Total current limit for GPIO[7:0] | | | | 100 | mA | | 10 |
| Total supply current sourced by all GPIOs | | | | 160 | mA | | 10 |
| Operating Temperature | | -40 | | 85 | °C | | 10 |
| Storage Temperature | | -65 | | 150 | °C | | 10 |
| Power Dissipation | | | | 200 | mW | | 10 |
| Thermal resistance junction-ambient (16-TSSOP) | theta-ja | | 105 | | °C/W | Typical, margin of error ±15% | 10 |
| Thermal resistance junction-case (16-TSSOP) | theta-jc | | 20 | | °C/W | Typical, margin of error ±15% | 10 |
| Operating voltage | VCC | 1.65 | | 3.6 | V | | 1 |
| Operating temperature range | TA | -40 | | 85 | °C | | 2 |
| Input Low Voltage (I2C SDA, SCL) | VIL | -0.3 | | | V | Note 1; max 0.3VCC for all three columns | 11 |
| Input Low Voltage (GPIOs, A0-A2), 1.8V ±10% | VIL | -0.3 | | 0.2 | V | Note 2; 1.8V ±10% | 11 |
| Input Low Voltage (GPIOs, A0-A2), 2.5V ±10% | VIL | -0.3 | | 0.5 | V | Note 2; 2.5V ±10% | 11 |
| Input Low Voltage (GPIOs, A0-A2), 3.3V ±10% | VIL | -0.3 | | 0.8 | V | Note 2; 3.3V ±10% | 11 |
| Input High Voltage (I2C SDA, SCL), 1.8V ±10% | VIH | 1.3 | | | V | Note 1; 1.8V ±10%; max VCC | 11 |
| Input High Voltage (I2C SDA, SCL), 2.5V ±10% | VIH | 1.8 | | | V | Note 1; 2.5V ±10%; max VCC | 11 |
| Input High Voltage (I2C SDA, SCL), 3.3V ±10% | VIH | 2.3 | | | V | Note 1; 3.3V ±10%; max VCC | 11 |
| Input High Voltage (GPIOs, A0-A2), 1.8V ±10% | VIH | 1.4 | | 5.5 | V | Note 2; 1.8V ±10% | 11 |
| Input High Voltage (GPIOs, A0-A2), 2.5V ±10% | VIH | 1.8 | | 5.5 | V | Note 2; 2.5V ±10% | 11 |
| Input High Voltage (GPIOs, A0-A2), 3.3V ±10% | VIH | 2 | | 5.5 | V | Note 2; 3.3V ±10% | 11 |
| Output Low Voltage (SDA) | VOL | | | 0.4 | V | IOL = 3 mA; Note 3; all three columns | 11 |
| Output Low Voltage (GPIOs) | VOL | | | 0.5 | V | IOL = 8 mA; Note 4; all three columns | 11 |
| Output Low Voltage (IRQ#), 1.8V ±10% | VOL | | | 0.4 | V | IOL = 6 mA; Note 5; 1.8V ±10% | 11 |
| Output Low Voltage (IRQ#), 2.5V ±10% | VOL | | | 0.4 | V | IOL = 4 mA; Note 5; 2.5V ±10% | 11 |
| Output Low Voltage (IRQ#), 3.3V ±10% | VOL | | | 0.4 | V | IOL = 1.5 mA; Note 5; 3.3V ±10% | 11 |
| Output High Voltage (GPIOs), 1.8V ±10% | VOH | 1.2 | | | V | IOH = -8 mA; Note 4; 1.8V ±10% | 11 |
| Output High Voltage (GPIOs), 2.5V ±10% | VOH | 1.8 | | | V | IOH = -8 mA; Note 4; 2.5V ±10% | 11 |
| Output High Voltage (GPIOs), 3.3V ±10% | VOH | 2.6 | | | V | IOH = -8 mA; Note 4; 3.3V ±10% | 11 |
| Input Low Leakage Current | IIL | -10 | | 10 | uA | all three columns | 11 |
| Input High Leakage Current | IIH | -10 | | 10 | uA | all three columns | 11 |
| Power Supply Current, 1.8V ±10% | ICC | | | 50 | uA | Test 1; 1.8V ±10% | 11 |
| Power Supply Current, 2.5V ±10% | ICC | | | 100 | uA | Test 1; 2.5V ±10% | 11 |
| Power Supply Current, 3.3V ±10% | ICC | | | 200 | uA | Test 1; 3.3V ±10% | 11 |
| Power Supply Current, 1.8V ±10% | ICC | | | 150 | uA | Test 2; 1.8V ±10% | 11 |
| Power Supply Current, 2.5V ±10% | ICC | | | 250 | uA | Test 2; 2.5V ±10% | 11 |
| Power Supply Current, 3.3V ±10% | ICC | | | 500 | uA | Test 2; 3.3V ±10% | 11 |
| Standby Current, 1.8V ±10% | ICCS | | | 1 | uA | Test 3; 1.8V ±10% | 11 |
| Standby Current, 2.5V ±10% | ICCS | | | 2 | uA | Test 3; 2.5V ±10% | 11 |
| Standby Current, 3.3V ±10% | ICCS | | | 5 | uA | Test 3; 3.3V ±10% | 11 |
| Input Pin Capacitance | CIN | | | 5 | pF | all three columns | 11 |
| GPIO pull-up resistance | RGPIO | 60 | 100 | 140 | kΩ | 100kΩ ± 40%; all three columns | 11 |
| Operating frequency, standard mode | fSCL | 0 | | 100 | kHz | Standard mode | 12 |
| Operating frequency, fast mode | fSCL | 0 | | 400 | kHz | Fast mode | 12 |
| Bus free time between STOP and START | TBUF | 1.3 | | | µs | Fast mode (standard mode min 4.7) | 12 |
| START condition hold time | THD;STA | 0.6 | | | µs | Fast mode (standard mode min 4.0) | 12 |
| START condition setup time | TSU;STA | 0.6 | | | µs | Fast mode (standard mode min 4.7) | 12 |
| Data setup time | TSU;DAT | 150 | | | ns | Fast mode (standard mode min 250) | 12 |
| Clock LOW period | TLOW | 1.3 | | | µs | Fast mode (standard mode min 4.7) | 12 |
| Clock HIGH period | THIGH | 0.6 | | | µs | Fast mode (standard mode min 4.0) | 12 |
| Clock/data fall time | TF | | | 300 | ns | Fast and standard mode | 12 |
| Clock/data rise time | TR | | | 300 | ns | Fast mode (standard mode max 1000) | 12 |
| Pulse width of spikes tolerance | TSP | | | 50 | ns | Fast and standard mode | 12 |
| I2C-bus GPIO output valid | TD1 | | | 0.2 | µs | Fast and standard mode | 12 |
## CAD (KiCad official)
- Symbol: `XRA1200PIG16TR-F`
- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`
- 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files: `xra1200pig16tr-f-etched.step` / `xra1200pig16tr-f-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `xra1200pig16tr-f.step` / `xra1200pig16tr-f.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [MaxLinear datasheet](docs/xra1200pig16tr-f-datasheet.pdf) (16 pp, sha256 `1e65aeb45ae1c889`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/xra1200pig16tr-f-datasheet.pdf)