component
XR33058HDTR-F
Public Made by Adomby adom
MaxLinear Pre-ordered Chips, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
XR33058HDTR-F
MaxLinear · Pre-ordered Chips · SOIC-8
XR33058HDTR-F from MaxLinear, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output: when RE is low and A-B is at least 200mV, RO is high, and when A-B is at or below -200mV, RO is low; if the inputs are floating, shorted, or terminated and undriven for more than 2µs, the output is high. |
| 2 | RE | input | Receiver output enable (hot swap): RO is enabled when RE is low and is high impedance when RE is high; RE should be high and DE low to enter shutdown mode. |
| 3 | DE | input | Driver output enable (hot swap): the driver outputs are enabled when DE is high and are high impedance when DE is low; DE should be low and RE high to enter shutdown mode. |
| 4 | DI | input | Driver input: with DE high, a low on DI forces the non-inverting output low and the inverting output high, and a high on DI forces the non-inverting output high and the inverting output low. |
| 5 | GND | power_in | Power ground. |
| 6 | A/Y | bidirectional | Non-inverting receiver input and non-inverting driver output; the absolute maximum ratings allow ±60V on the driver output and receiver input voltage. |
| 7 | B/Z | bidirectional | Inverting receiver input and inverting driver output; the absolute maximum ratings allow ±60V on the driver output and receiver input voltage. |
| 8 | VCC | power_in | Power supply input, 3.0V to 5.5V, to be bypassed to ground with a 0.1µF capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MaxLinear |
| Package | SOIC-8 |
| Category | Interface ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VCC | 3 | 5.5 | V | 3 | ||
| Differential driver output (RS-422) | VOD | 2 | V | 4.5V ≤ VCC ≤ 5.5V, RL = 100Ω (RS-422), Figure 3 | 3 | ||
| Differential driver output (RS-485) | VOD | 1.5 | V | 4.5V ≤ VCC ≤ 5.5V, RL = 54Ω (RS-485), Figure 3 | 3 | ||
| Differential driver output over common mode | VOD | 1.5 | V | -25V ≤ VCM ≤ 25V, Figure 4 | 3 | ||
| Differential driver output (RS-422), 3.0V to 4.5V | VOD | 0.85 | V | 3.0V ≤ VCC ≤ 4.5V, RL = 100Ω (RS-422), Figure 3 | 3 | ||
| Differential driver output (RS-485), 3.0V to 4.5V | VOD | 0.65 | V | 3.0V ≤ VCC ≤ 4.5V, RL = 54Ω (RS-485), Figure 3 | 3 | ||
| Change in magnitude of differential output voltage | ∆VOD | -0.2 | 0.2 | V | RL = 100Ω (RS-422) or RL = 54Ω (RS-485), Figure 3 | 3 | |
| Driver common-mode output voltage | VCM | 1 | 3 | V | steady state | 3 | |
| Change in magnitude of common-mode output voltage | ∆VCM | -0.2 | 0.2 | V | 3 | ||
| Logic high input threshold (DI, DE, RE) | VIH | 2 | V | VCC = 3.3V | 3 | ||
| Logic high input threshold (DI, DE, RE) | VIH | 2.4 | V | VCC = 5.0V | 3 | ||
| Logic low input threshold (DI, DE, RE) | VIL | 0.8 | V | 3 | |||
| Input hysteresis (DI, DE, RE) | VHYS | 100 | mV | 3 | |||
| Logic input current (DI, DE, RE) | IIN | -1 | 1 | µA | 0V ≤ VIN ≤ VCC, After first transition | 3 | |
| Logic input current hot swap (DE, RE) | IINHS | -200 | 100 | 200 | µA | Until first transition | 3 |
| Input current (A and B), positive VOUT | IA, B | 400 | μA | VOUT = 12V, DE = 0V, VCC = 0V or 5.5V, for XR33058 | 3 | ||
| Input current (A and B), negative VOUT | IA, B | -320 | μA | VOUT = -7V, DE = 0V, VCC = 0V or 5.5V, for XR33058 | 3 | ||
| Driver short-circuit output current | IOSD | -250 | 250 | mA | -60V ≤ VOUT ≤ 60V, DI = 0V or VCC, Figure 5 | 3 | |
| Thermal shutdown temperature | TTS | 175 | °C | Junction temperature | 4 | ||
| Receiver differential input threshold voltage | VSTH | -85 | 200 | mV | -25V ≤ VOUT ≤ 25V | 4 | |
| Receiver differential input signal hysteresis | ∆VSTH | 170 | mV | 4 | |||
| Negative going receiver fail-safe threshold voltage | VFSTH- | -200 | -125 | -40 | mV | -25V ≤ VOUT ≤ 25V | 4 |
| Positive going receiver fail-safe threshold voltage | VFSTH+ | -100 | -10 | mV | -25V ≤ VOUT ≤ 25V | 4 | |
| Receiver differential input fail-safe hysteresis | ∆VFSTH | 25 | mV | 4 | |||
| Receiver output low voltage (RO) | VOL | 0.4 | V | IOUT = 4mA | 4 | ||
| High-Z receiver output current | IOZR | -1 | 1 | µA | 0V ≤ VOUT ≤ VCC | 4 | |
| RX input resistance (XR33058) | RIN | 30 | kΩ | -25V ≤ VCM ≤ 25V, XR33058 | 4 | ||
| RX output short-circuit current | IOSC | 110 | mA | 0V ≤ VRO ≤ VCC | 4 | ||
| Supply current | ICC | 4 | mA | No load, RE = 0V or VCC, DE = VCC, DI = 0V or VCC | 4 | ||
| Supply current in shutdown mode | ISHDN | 0.001 | 1 | µA | RE = VCC, DE = 0V | 4 | |
| Driver propagation delay (low to high), XR33058 | tDPLH | 25 | ns | CL = 50pF, RL = 54Ω, Figure 7 | 7 | ||
| Driver propagation delay (high to low), XR33058 | tDPHL | 25 | ns | CL = 50pF, RL = 54Ω, Figure 7 | 7 | ||
| Driver differential output rise or fall time, XR33058 | tDR, tDF | 15 | ns | 7 | |||
| Maximum data rate (driver), XR33058 | 20 | Mbps | 1/tUI, duty cycle 40% to 60% | 7 | |||
| Driver disable from output high | tDHZ | 250 | ns | 7 | |||
| Driver disable from output low | tDLZ | 250 | ns | 7 | |||
| Driver enable to output high, XR33058 | tDZH | 60 | ns | CL = 50pF, RL = 500Ω, Figure 8 | 7 | ||
| Driver enable to output low, XR33058 | tDZL | 60 | ns | CL = 50pF, RL = 500Ω, Figure 8 | 7 | ||
| Driver enable from shutdown to output high, XR33058 | tDZH(SHDN) | 2200 | ns | CL = 50pF, RL = 500Ω, Figure 8 | 7 | ||
| Driver enable from shutdown to output low, XR33058 | tDZL(SHDN) | 2200 | ns | CL = 50pF, RL = 500Ω, Figure 8 | 7 | ||
| Time to shutdown | tSHDN | 50 | 200 | 600 | ns | Notes 1 and 2 | 7 |
| Receiver propagation delay (low to high), XR33058 | tRPLH | 60 | ns | CL = 15pF, VID = ±2V, VID rise and fall times < 15ns, Figure 9 | 7 | ||
| Receiver propagation delay (high to low), XR33058 | tRPHL | 60 | ns | CL = 15pF, VID = ±2V, VID rise and fall times < 15ns, Figure 9 | 7 | ||
| Receiver enable to output high, XR33058 | tRZH | 50 | ns | CL = 15pF, RL = 1kΩ, Figure 10 | 7 | ||
| Receiver enable to output low, XR33058 | tRZL | 50 | ns | CL = 15pF, RL = 1kΩ, Figure 10 | 7 | ||
| Receiver enable from shutdown to output high, XR33058 | tRZH(SHDN) | 2200 | ns | CL = 15pF, RL = 1kΩ, Figure 10 | 7 | ||
| Absolute maximum supply voltage | VCC | -0.3 | 7 | V | 2 | ||
| Input voltage (DE and DI) | -0.3 | 7 | V | 2 | |||
| Driver output voltage (Y, Z, A/Y and B/Z) | -60 | 60 | V | 2 | |||
| Receiver input voltage (A, B, A/Y and B/Z) | -60 | 60 | V | 2 | |||
| Transient voltage pulse | -100 | 100 | V | through 100Ω | 2 | ||
| Driver output current | -250 | 250 | mA | 2 | |||
| Maximum junction temperature | 150 | °C | 2 | ||||
| Storage temperature | -65 | 150 | °C | 2 | |||
| Lead temperature | 300 | °C | soldering 10 seconds | 2 | |||
| ESD HBM (A, B, Y and Z pins) | -15 | 15 | kV | Human Body Model | 2 | ||
| ESD HBM (all other pins) | -4 | 4 | kV | Human Body Model | 2 | ||
| Supply voltage range (operating) | VCC | 3 | 5.5 | V | 2 | ||
| Operating temperature range (HD grade) | -40 | 105 | °C | 2 |
CAD (KiCad official)
- Symbol:
XR33058HDTR-F - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
xr33058hdtr-f-etched.step/xr33058hdtr-f-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xr33058hdtr-f.step/xr33058hdtr-f.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MaxLinear datasheet (20 pp, sha256
d4d2065166fbb06f, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# XR33058HDTR-F
**MaxLinear** · Pre-ordered Chips · SOIC-8
XR33058HDTR-F from MaxLinear, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output: when RE is low and A-B is at least 200mV, RO is high, and when A-B is at or below -200mV, RO is low; if the inputs are floating, shorted, or terminated and undriven for more than 2µs, the output is high. |
| 2 | RE | input | Receiver output enable (hot swap): RO is enabled when RE is low and is high impedance when RE is high; RE should be high and DE low to enter shutdown mode. |
| 3 | DE | input | Driver output enable (hot swap): the driver outputs are enabled when DE is high and are high impedance when DE is low; DE should be low and RE high to enter shutdown mode. |
| 4 | DI | input | Driver input: with DE high, a low on DI forces the non-inverting output low and the inverting output high, and a high on DI forces the non-inverting output high and the inverting output low. |
| 5 | GND | power_in | Power ground. |
| 6 | A/Y | bidirectional | Non-inverting receiver input and non-inverting driver output; the absolute maximum ratings allow ±60V on the driver output and receiver input voltage. |
| 7 | B/Z | bidirectional | Inverting receiver input and inverting driver output; the absolute maximum ratings allow ±60V on the driver output and receiver input voltage. |
| 8 | VCC | power_in | Power supply input, 3.0V to 5.5V, to be bypassed to ground with a 0.1µF capacitor. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MaxLinear |
| Package | SOIC-8 |
| Category | Interface ICs |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VCC | 3 | | 5.5 | V | | 3 |
| Differential driver output (RS-422) | VOD | 2 | | | V | 4.5V ≤ VCC ≤ 5.5V, RL = 100Ω (RS-422), Figure 3 | 3 |
| Differential driver output (RS-485) | VOD | 1.5 | | | V | 4.5V ≤ VCC ≤ 5.5V, RL = 54Ω (RS-485), Figure 3 | 3 |
| Differential driver output over common mode | VOD | 1.5 | | | V | -25V ≤ VCM ≤ 25V, Figure 4 | 3 |
| Differential driver output (RS-422), 3.0V to 4.5V | VOD | 0.85 | | | V | 3.0V ≤ VCC ≤ 4.5V, RL = 100Ω (RS-422), Figure 3 | 3 |
| Differential driver output (RS-485), 3.0V to 4.5V | VOD | 0.65 | | | V | 3.0V ≤ VCC ≤ 4.5V, RL = 54Ω (RS-485), Figure 3 | 3 |
| Change in magnitude of differential output voltage | ∆VOD | -0.2 | | 0.2 | V | RL = 100Ω (RS-422) or RL = 54Ω (RS-485), Figure 3 | 3 |
| Driver common-mode output voltage | VCM | 1 | | 3 | V | steady state | 3 |
| Change in magnitude of common-mode output voltage | ∆VCM | -0.2 | | 0.2 | V | | 3 |
| Logic high input threshold (DI, DE, RE) | VIH | 2 | | | V | VCC = 3.3V | 3 |
| Logic high input threshold (DI, DE, RE) | VIH | 2.4 | | | V | VCC = 5.0V | 3 |
| Logic low input threshold (DI, DE, RE) | VIL | | | 0.8 | V | | 3 |
| Input hysteresis (DI, DE, RE) | VHYS | | | 100 | mV | | 3 |
| Logic input current (DI, DE, RE) | IIN | -1 | | 1 | µA | 0V ≤ VIN ≤ VCC, After first transition | 3 |
| Logic input current hot swap (DE, RE) | IINHS | -200 | 100 | 200 | µA | Until first transition | 3 |
| Input current (A and B), positive VOUT | IA, B | | | 400 | μA | VOUT = 12V, DE = 0V, VCC = 0V or 5.5V, for XR33058 | 3 |
| Input current (A and B), negative VOUT | IA, B | -320 | | | μA | VOUT = -7V, DE = 0V, VCC = 0V or 5.5V, for XR33058 | 3 |
| Driver short-circuit output current | IOSD | -250 | | 250 | mA | -60V ≤ VOUT ≤ 60V, DI = 0V or VCC, Figure 5 | 3 |
| Thermal shutdown temperature | TTS | | | 175 | °C | Junction temperature | 4 |
| Receiver differential input threshold voltage | VSTH | -85 | | 200 | mV | -25V ≤ VOUT ≤ 25V | 4 |
| Receiver differential input signal hysteresis | ∆VSTH | | | 170 | mV | | 4 |
| Negative going receiver fail-safe threshold voltage | VFSTH- | -200 | -125 | -40 | mV | -25V ≤ VOUT ≤ 25V | 4 |
| Positive going receiver fail-safe threshold voltage | VFSTH+ | -100 | | -10 | mV | -25V ≤ VOUT ≤ 25V | 4 |
| Receiver differential input fail-safe hysteresis | ∆VFSTH | | | 25 | mV | | 4 |
| Receiver output low voltage (RO) | VOL | | | 0.4 | V | IOUT = 4mA | 4 |
| High-Z receiver output current | IOZR | -1 | | 1 | µA | 0V ≤ VOUT ≤ VCC | 4 |
| RX input resistance (XR33058) | RIN | 30 | | | kΩ | -25V ≤ VCM ≤ 25V, XR33058 | 4 |
| RX output short-circuit current | IOSC | | | 110 | mA | 0V ≤ VRO ≤ VCC | 4 |
| Supply current | ICC | | | 4 | mA | No load, RE = 0V or VCC, DE = VCC, DI = 0V or VCC | 4 |
| Supply current in shutdown mode | ISHDN | | 0.001 | 1 | µA | RE = VCC, DE = 0V | 4 |
| Driver propagation delay (low to high), XR33058 | tDPLH | | | 25 | ns | CL = 50pF, RL = 54Ω, Figure 7 | 7 |
| Driver propagation delay (high to low), XR33058 | tDPHL | | | 25 | ns | CL = 50pF, RL = 54Ω, Figure 7 | 7 |
| Driver differential output rise or fall time, XR33058 | tDR, tDF | | | 15 | ns | | 7 |
| Maximum data rate (driver), XR33058 | | | | 20 | Mbps | 1/tUI, duty cycle 40% to 60% | 7 |
| Driver disable from output high | tDHZ | | | 250 | ns | | 7 |
| Driver disable from output low | tDLZ | | | 250 | ns | | 7 |
| Driver enable to output high, XR33058 | tDZH | | | 60 | ns | CL = 50pF, RL = 500Ω, Figure 8 | 7 |
| Driver enable to output low, XR33058 | tDZL | | | 60 | ns | CL = 50pF, RL = 500Ω, Figure 8 | 7 |
| Driver enable from shutdown to output high, XR33058 | tDZH(SHDN) | | | 2200 | ns | CL = 50pF, RL = 500Ω, Figure 8 | 7 |
| Driver enable from shutdown to output low, XR33058 | tDZL(SHDN) | | | 2200 | ns | CL = 50pF, RL = 500Ω, Figure 8 | 7 |
| Time to shutdown | tSHDN | 50 | 200 | 600 | ns | Notes 1 and 2 | 7 |
| Receiver propagation delay (low to high), XR33058 | tRPLH | | | 60 | ns | CL = 15pF, VID = ±2V, VID rise and fall times < 15ns, Figure 9 | 7 |
| Receiver propagation delay (high to low), XR33058 | tRPHL | | | 60 | ns | CL = 15pF, VID = ±2V, VID rise and fall times < 15ns, Figure 9 | 7 |
| Receiver enable to output high, XR33058 | tRZH | | | 50 | ns | CL = 15pF, RL = 1kΩ, Figure 10 | 7 |
| Receiver enable to output low, XR33058 | tRZL | | | 50 | ns | CL = 15pF, RL = 1kΩ, Figure 10 | 7 |
| Receiver enable from shutdown to output high, XR33058 | tRZH(SHDN) | | | 2200 | ns | CL = 15pF, RL = 1kΩ, Figure 10 | 7 |
| Absolute maximum supply voltage | VCC | -0.3 | | 7 | V | | 2 |
| Input voltage (DE and DI) | | -0.3 | | 7 | V | | 2 |
| Driver output voltage (Y, Z, A/Y and B/Z) | | -60 | | 60 | V | | 2 |
| Receiver input voltage (A, B, A/Y and B/Z) | | -60 | | 60 | V | | 2 |
| Transient voltage pulse | | -100 | | 100 | V | through 100Ω | 2 |
| Driver output current | | -250 | | 250 | mA | | 2 |
| Maximum junction temperature | | | | 150 | °C | | 2 |
| Storage temperature | | -65 | | 150 | °C | | 2 |
| Lead temperature | | | | 300 | °C | soldering 10 seconds | 2 |
| ESD HBM (A, B, Y and Z pins) | | -15 | | 15 | kV | Human Body Model | 2 |
| ESD HBM (all other pins) | | -4 | | 4 | kV | Human Body Model | 2 |
| Supply voltage range (operating) | VCC | 3 | | 5.5 | V | | 2 |
| Operating temperature range (HD grade) | | -40 | | 105 | °C | | 2 |
## CAD (KiCad official)
- Symbol: `XR33058HDTR-F`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `xr33058hdtr-f-etched.step` / `xr33058hdtr-f-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `xr33058hdtr-f.step` / `xr33058hdtr-f.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [MaxLinear datasheet](docs/xr33058hdtr-f-datasheet.pdf) (20 pp, sha256 `d4d2065166fbb06f`, retrieved 2026-10-30, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/xr33058hdtr-f-datasheet.pdf)