component
XR33032ID-F
Public Made by Adomby adom
MaxLinear Pre-ordered Chips, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195
{
"slug": "xr33032id-f",
"version": "0.1.0",
"type": "component",
"description": "MaxLinear Pre-ordered Chips, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"interface ics",
"xr33032id-f",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"xr33032id-f.kicad_sym",
"xr33032id-f.kicad_mod",
"xr33032id-f.glb",
"xr33032id-f.step",
"xr33032id-f.lbr",
"docs/hero.png",
"docs/xr33032id-f-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"xr33032id-f-hero.glb",
"xr33032id-f-hero.overlay.json",
"xr33032id-f-etched.glb"
],
"component": {
"mpn": "XR33032ID-F",
"manufacturer": "MaxLinear",
"package": "SOIC-8",
"pin_count": 8,
"category": "Interface ICs",
"subcategory": "Pre-ordered Chips",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/e48f20423e8ff45af2e8af9bd94c2888.pdf",
"parts": {
"symbol": "xr33032id-f.kicad_sym",
"footprint": "xr33032id-f.kicad_mod",
"model_3d": "xr33032id-f-hero.glb",
"model_3d_plain": "xr33032id-f-etched.glb",
"model_3d_step": "xr33032id-f-etched.step",
"model_3d_step_plain": "xr33032id-f.step",
"lbr": "xr33032id-f.lbr"
},
"distributor_links": {
"lcsc": "C1544431",
"digikey": "1016-2000-5-ND",
"mouser": "701-XR33032ID-F"
},
"distributor_check": {
"checked_at": "2026-10-30T23:00:08Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "1016-2000-5-ND",
"status": "found",
"lifecycle": "Active"
},
"mouser": {
"pn": "701-XR33032ID-F",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "RO",
"type": "output",
"description": "Receiver output: when RE is low and (A-B) is at or above -50mV, RO is high; when (A-B) is at or below -200mV, RO is low."
},
{
"number": "2",
"name": "RE",
"type": "input",
"description": "Receiver output enable (hot swap): RO is enabled when RE is low and high-impedance when RE is high, and RE high with DE low enters shutdown mode."
},
{
"number": "3",
"name": "DE",
"type": "input",
"description": "Driver output enable (hot swap): the driver outputs are enabled when DE is high and high-impedance when DE is low, and DE low with RE high enters shutdown mode."
},
{
"number": "4",
"name": "DI",
"type": "input",
"description": "Driver input: with DE high, a low on DI forces the non-inverting output low and the inverting output high, and a high on DI does the reverse."
},
{
"number": "5",
"name": "GND",
"type": "power_in",
"description": "Ground reference for the device."
},
{
"number": "6",
"name": "A",
"type": "bidirectional",
"description": "Non-inverting receiver input and non-inverting driver output; the analog bus pin withstands direct shorts up to ±18V and is ESD-protected to ±15kV HBM."
},
{
"number": "7",
"name": "B",
"type": "bidirectional",
"description": "Inverting receiver input and inverting driver output; the analog bus pin withstands direct shorts up to ±18V and is ESD-protected to ±15kV HBM."
},
{
"number": "8",
"name": "VCC",
"type": "power_in",
"description": "Power supply input operating from +2.8V to +5.5V; bypass to ground with a 0.1 µF capacitor."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The datasheet calls the package '8 NSOIC' (8-pin SO); the ordering table on page 2 lists XR33032ID-F; Pin descriptions for A and B include the ±18V bus fault rating and ±15kV HBM ESD rating from the gen"
],
"pages_sent": 19,
"cost_usd": 0.067,
"at": "2026-10-30T22:59:53"
},
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/e48f20423e8ff45af2e8af9bd94c2888.pdf",
"pages": 19,
"sha256": "fa548c51581f4b2a",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 8,
"described": 8,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "xr33032id-f.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.0,
4.9,
1.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
"checked": "2026-10-30",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "xr33032id-f-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.0,
4.9,
1.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "b2bd35cb451d0aad8d092a68082955c56e447e65107bf1faa02ce01cb6ffa1ed",
"checked": "2026-10-30",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}