3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownXR31234EDTR
MaxLinear · CAN Transceivers · SOIC-8
XR31234EDTR from MaxLinear, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | D | input | CAN transmit data input (TXD), LOW for dominant and HIGH for recessive bus state. |
| 2 | GND | power_in | Ground. |
| 3 | VCC | power_in | 3.3V power supply input (3.0V to 3.6V operating), bypass to ground with 0.1μF capacitor. |
| 4 | R | output | CAN receive data output (RXD), LOW for dominant and HIGH for recessive bus state. |
| 5 | EN | input | XR31234 enable input: EN = 1 is normal mode where D drives the CAN bus, EN = 0 is low-power sleep mode. |
| 6 | CANL | bidirectional | Low level CAN bus line, tolerant to -36V to 36V. |
| 7 | CANH | bidirectional | High level CAN bus line, tolerant to -36V to 36V. |
| 8 | RS | input | Mode select: strong pulldown to GND = high speed mode, strong pullup to VCC = low power standby mode, 10kΩ to 100kΩ pulldown to GND = slope control mode. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MaxLinear |
| Package | SOIC-8 |
| Category | Communication Interface Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VCC | 3 | 3.6 | V | 2 | ||
| Operating temperature range | -40 | 125 | °C | 2 | |||
| Supply voltage | VCC | -0.3 | 7 | V | 2 | ||
| Voltage at any bus terminal | -36 | 36 | V | CANH or CANL | 2 | ||
| Transient pulse voltage CANH/CANL | -100 | 100 | V | through 100Ω (Figure 9) | 2 | ||
| Input voltage | -0.5 | 7 | V | D, RS, EN, LBK, AB | 2 | ||
| Output voltage | -0.5 | 7 | V | 2 | |||
| Receiver output current | -10 | 10 | mA | 2 | |||
| Operating junction temperature | 150 | °C | 2 | ||||
| Storage temperature | -65 | 150 | °C | 2 | |||
| Lead temperature | 300 | °C | soldering 10 seconds | 2 | |||
| Bus output voltage dominant CANH | VO(D) | 2.3 | 3.6 | V | D at 0V, RS at 0V, see Figure 3 and Figure 4; max printed as VCC | 3 | |
| Bus output voltage dominant CANL | VO(D) | 0.5 | 1.25 | V | D at 0V, RS at 0V, see Figure 3 and Figure 4 | 3 | |
| Differential output voltage dominant | VOD(D) | 1.5 | 2 | 3 | V | D at 0V, RS at 0V, see Figure 3 and Figure 4 | 3 |
| Differential output voltage dominant | VOD(D) | 1.2 | 2 | 3 | V | D at 0V, RS at 0V, see Figure 4 and Figure 5 | 3 |
| Differential output voltage recessive | VOD | -120 | 12 | mV | D at 3V, RS at 0V, see Figure 3 and Figure 4 | 3 | |
| Differential output voltage recessive no load | VOD | -0.5 | 0.05 | V | D at 3V, RS at 0V, No Load | 3 | |
| Peak-to-peak common-mode output voltage | VOC(PP) | 1 | V | See Figure 12 | 3 | ||
| High-level input current D, EN, LBK, AB | IIH | -30 | 30 | μA | D = 2V or EN = 2V or LBK = 2V or AB = 2V | 3 | |
| Low-level input current D, EN, LBK, AB | IIL | -30 | 30 | μA | D = 0.8V or EN = 0.8V or LBK = 0.8V or AB = 0.8V | 3 | |
| Supply current sleep | ICC | 0.05 | 2 | μA | EN at 0V, D at VCC, RS at 0V or VCC | 3 | |
| Supply current standby | ICC | 200 | 600 | μA | RS at VCC, D at VCC, AB at 0V, LBK at 0V, EN at VCC | 3 | |
| Supply current dominant | ICC | 6 | mA | D at 0V, No Load, AB at 0V, LBK at 0V | 3 | ||
| Supply current recessive | ICC | 6 | mA | D at VCC, No Load, AB at 0V, LBK at 0V, RS at 0V, EN at VCC | 3 | ||
| Positive-going input threshold voltage | VIT+ | 750 | 900 | mV | AB at 0V, LBK at 0V, EN at VCC, see Table 1 | 4 | |
| Negative-going input threshold voltage | VIT- | 500 | 650 | mV | AB at 0V, LBK at 0V, EN at VCC, see Table 1 | 4 | |
| Hysteresis voltage | VHYS | 100 | mV | VIT+ to VIT- | 4 | ||
| High-level output voltage | VOH | 2 | V | VCC < 3.3V, IO = -4mA, see Figure 8 | 4 | ||
| High-level output voltage | VOH | 2.4 | V | VCC ≥ 3.0V, IO = -4mA, see Figure 8 | 4 | ||
| Low-level output voltage | VOL | 0.4 | V | IO = 4mA, see Figure 8 | 4 | ||
| Bus input current at 25V | II | 400 | 1250 | μA | CANH or CANL at 25V, other bus pin at 0V, D at 3V, AB/LBK/RS at 0V, EN at VCC | 4 | |
| Bus input current at -25V | II | -1400 | -500 | μA | CANH or CANL at -25V | 4 | |
| Input capacitance CANH or CANL | CI | 40 | pF | Pin-to-ground, VI = 0.4 sin(4E6πt)+0.5V, D at 3V, EN at VCC | 4 | ||
| Differential input capacitance | CID | 20 | pF | Pin-to-pin, VI = 0.4 sin(4E6πt)+0.5V, D at 3V, EN at VCC | 4 | ||
| Differential input resistance | RID | 40 | 100 | kΩ | D at 3V, AB at 0V, LBK at 0V, EN at VCC | 4 | |
| Input resistance CANH or CANL to ground | RIN | 20 | 50 | kΩ | D at 3V, AB at 0V, LBK at 0V, EN at VCC | 4 | |
| Driver propagation delay low-to-high | tPLH | 35 | 85 | ns | RS at 0V, see Figure 6 | 5 | |
| Driver propagation delay low-to-high | tPLH | 70 | 125 | ns | RS with 10kΩ to ground, see Figure 6 | 5 | |
| Driver propagation delay low-to-high | tPLH | 500 | 870 | ns | RS with 100kΩ to ground, see Figure 6 | 5 | |
| Driver propagation delay high-to-low | tPHL | 70 | 120 | ns | RS at 0V, see Figure 6 | 5 | |
| Driver propagation delay high-to-low | tPHL | 130 | 180 | ns | RS with 10kΩ to ground, see Figure 6 | 5 | |
| Driver propagation delay high-to-low | tPHL | 870 | 1200 | ns | RS with 100kΩ to ground, see Figure 6 | 5 | |
| Differential output rise time | tr | 5 | 70 | ns | RS at 0V, see Figure 6 | 5 | |
| Differential output fall time | tf | 5 | 70 | ns | RS at 0V, see Figure 6 | 5 | |
| Differential output rise time | tr | 30 | 135 | ns | RS with 10kΩ to ground, see Figure 6 | 5 | |
| Differential output rise time | tr | 350 | 1400 | ns | RS with 100kΩ to ground, see Figure 6 | 5 | |
| Enable time from standby to dominant | ten(s) | 0.6 | 1.5 | μs | See Figure 10 | 5 | |
| Enable time from sleep to dominant | ten(z) | 1 | 5 | μs | XR31234, See Figure 11 | 5 | |
| Receiver propagation delay low-to-high | tPLH | 35 | 60 | ns | See Figure 8 | 5 | |
| Receiver propagation delay high-to-low | tPHL | 35 | 60 | ns | See Figure 8 | 5 | |
| Receiver pulse skew | tsk(p) | 7 | ns | See Figure 8 | 5 | ||
| Total loop delay recessive to dominant | t(loop1) | 70 | 135 | ns | RS at 0V, see Figure 13 | 6 | |
| Total loop delay dominant to recessive | t(loop2) | 70 | 135 | ns | RS at 0V, See Figure 13 | 6 |
CAD (KiCad official)
- Symbol:
XR31234EDTR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
xr31234edtr-etched.step/xr31234edtr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xr31234edtr.step/xr31234edtr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MaxLinear datasheet (16 pp, sha256
64dd288d5223a33a, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).