XPM5015A35

{
  "slug": "xpm5015a35",
  "version": "0.1.0",
  "type": "component",
  "description": "Shenzhen Fuman Battery Management, ESOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "xpm5015a35",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "xpm5015a35.kicad_sym",
    "xpm5015a35.kicad_mod",
    "xpm5015a35.glb",
    "xpm5015a35.step",
    "xpm5015a35.lbr",
    "docs/hero.png",
    "docs/xpm5015a35-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "xpm5015a35-hero.glb",
    "xpm5015a35-hero.overlay.json",
    "xpm5015a35-etched.glb"
  ],
  "component": {
    "mpn": "XPM5015A35",
    "manufacturer": "Shenzhen Fuman",
    "package": "ESOP-8",
    "pin_count": 9,
    "category": "Power Management (PMIC)",
    "subcategory": "Battery Management",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588946083657891840",
    "parts": {
      "symbol": "xpm5015a35.kicad_sym",
      "footprint": "xpm5015a35.kicad_mod",
      "model_3d": "xpm5015a35-hero.glb",
      "model_3d_plain": "xpm5015a35-etched.glb",
      "model_3d_step": "xpm5015a35-etched.step",
      "model_3d_step_plain": "xpm5015a35.step",
      "lbr": "xpm5015a35.lbr"
    },
    "distributor_links": {
      "lcsc": "C2927915"
    },
    "distributor_check": {
      "checked_at": "2026-10-19T01:23:12Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VOUT",
        "type": "input",
        "description": "Output voltage feedback pin that senses the regulated 5 V output (datasheet gives no numeric limit for this pin)."
      },
      {
        "number": "2",
        "name": "DPDM1",
        "type": "bidirectional",
        "description": "USB identification signal line DPDM1; the absolute maximum voltage on DPDM1/DPDM2 is -0.3 V to 6 V."
      },
      {
        "number": "3",
        "name": "DPDM2",
        "type": "bidirectional",
        "description": "USB identification signal line DPDM2; the absolute maximum voltage on DPDM1/DPDM2 is -0.3 V to 6 V."
      },
      {
        "number": "4",
        "name": "VIN",
        "type": "power_in",
        "description": "Input voltage pin that must be placed close to the IC with an input filter capacitor (100 µF recommended); absolute maximum 36 V, recommended operating range 8 V to 30 V."
      },
      {
        "number": "5",
        "name": "SW",
        "type": "output",
        "description": "DC-DC switching node connected to the inductor; absolute maximum VSW is -0.3 V to VIN."
      },
      {
        "number": "6",
        "name": "SW",
        "type": "output",
        "description": "DC-DC switching node connected to the inductor (second SW pin, same node as pin 5); absolute maximum VSW is -0.3 V to VIN."
      },
      {
        "number": "7",
        "name": "BST",
        "type": "passive",
        "description": "Bootstrap pin; a 0.1 µF bootstrap capacitor placed close to BST and SW supplies the high-side MOSFET gate drive, with VBST limited to VSW-0.3 V to VSW+6 V."
      },
      {
        "number": "8",
        "name": "LINK",
        "type": "bidirectional",
        "description": "Load status indicator on the XPD-LINK bus: high impedance at light load and sources 60 µA at heavy load; the bus uses a 10 kΩ pull-down resistor to ground in application."
      },
      {
        "number": "9",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground and heat-sink (thermal) ground for the device."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet pin table lists PGND as pin 9, but ESOP-8 has eight leads. Pin 9 is most likely the ex; Pins 5 and 6 are both SW and are internally the same node. The pin diagram text is garbled, so the m; The datasheet gives no numeric electrical limits for VOUT (pin 1) and the source does not classify i"
        ],
        "pages_sent": 8,
        "cost_usd": 0.0383,
        "at": "2026-10-19T01:21:20"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588946083657891840",
        "pages": 8,
        "sha256": "83842020ac9f68b5",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "xpm5015a35.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.9,
          4.9,
          1.65
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f1718a42c5ea007e8e2dd672ac39a1bb358ee4849bd53c42e21ce83e0e5df7a9",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "xpm5015a35-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.9,
          4.9,
          1.65
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "55817e35b000f24a0a93b67b05e183dd3a8f15b4cefcb2d93052cd0ae750852e",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}