main
Ray
Publish 0.1.0
0cbfad3
XMC4500-F100F1024 AC
Infineon Technologies · Infineon · LQFP-100(14x14)
XMC4500-F100F1024 AC from Infineon Technologies, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P0.1 | bidirectional | Port 0 bit 1 general-purpose I/O, pad class A1+, alternate functions include USB.DRIVEVBUS; default direct input with no pull device after reset. |
| 2 | P0.0 | bidirectional | Port 0 bit 0 general-purpose I/O, pad class A1+, alternate functions include CAN.N0_TXD; default direct input with no pull device after reset. |
| 3 | P0.10 | bidirectional | Port 0 bit 10 general-purpose I/O, pad class A1+, alternate functions include ETH0.MDC; default direct input with no pull device after reset. |
| 4 | P0.9 | bidirectional | Port 0 bit 9 general-purpose I/O, pad class A2, alternate functions include USB.ID; default direct input with no pull device after reset. |
| 5 | P3.2 | bidirectional | Port 3 bit 2 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 6 | P3.1 | bidirectional | Port 3 bit 1 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 7 | P3.0 | bidirectional | Port 3 bit 0 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 8 | USB_DM | bidirectional | USB OTG data line D-minus, compliant to USB Rev. 2.0; High-Speed Mode is not supported. |
| 9 | USB_DP | bidirectional | USB OTG data line D-plus, compliant to USB Rev. 2.0; High-Speed Mode is not supported. |
| 10 | VBUS | power_in | USB OTG VBUS input, valid input voltage range 0.0 V to 5.25 V. |
| 11 | VDDP | power_in | Digital I/O pad supply pin. |
| 12 | VDDC | power_in | Core supply pin, to be connected with an external buffer capacitor of 10 µF plus 100 nF per VDDC pin. |
| 13 | HIB_IO_1 | bidirectional | Hibernate domain I/O pin 1, medium driver mode active as output; configured as input with no pull device after first power-up. |
| 14 | HIB_IO_0 | bidirectional | Hibernate domain I/O pin 0, configured as open-drain output driving 0 after first power-up and after hibernate domain reset. |
| 15 | RTC_XTAL1 | input | RTC oscillator input for 32.768 kHz crystal, input amplitude at least 0.4 V peak-to-peak. |
| 16 | RTC_XTAL2 | output | RTC oscillator output for 32.768 kHz crystal. |
| 17 | VBAT | power_in | Backup supply for the hibernate domain and RTC; when VDDP is supplied VBAT has to be supplied as well, and crystal start requires VBAT of at least 3.0 V. |
| 18 | P15.3 | bidirectional | Port 15 bit 3 analog/digital input, pad class AN/DIG_IN. |
| 19 | P15.2 | bidirectional | Port 15 bit 2 analog/digital input, pad class AN/DIG_IN. |
| 20 | P14.15 | bidirectional | Port 14 bit 15 analog/digital input, pad class AN/DIG_IN. |
| 21 | P14.14 | bidirectional | Port 14 bit 14 analog/digital input, pad class AN/DIG_IN. |
| 22 | P14.13 | bidirectional | Port 14 bit 13 analog/digital input, pad class AN/DIG_IN. |
| 23 | P14.12 | bidirectional | Port 14 bit 12 analog/digital input, pad class AN/DIG_IN. |
| 24 | P14.7 | bidirectional | Port 14 bit 7 analog/digital input, pad class AN/DIG_IN. |
| 25 | P14.6 | bidirectional | Port 14 bit 6 analog/digital input, pad class AN/DIG_IN. |
| 26 | P14.5 | bidirectional | Port 14 bit 5 analog/digital input, pad class AN/DIG_IN. |
| 27 | P14.4 | bidirectional | Port 14 bit 4 analog/digital input, pad class AN/DIG_IN. |
| 28 | P14.3 | bidirectional | Port 14 bit 3 analog/digital input, pad class AN/DIG_IN. |
| 29 | P14.2 | bidirectional | Port 14 bit 2 analog/digital input, pad class AN/DIG_IN. |
| 30 | P14.1 | bidirectional | Port 14 bit 1 analog/digital input, pad class AN/DIG_IN. |
| 31 | P14.0 | bidirectional | Port 14 bit 0 analog/digital input, pad class AN/DIG_IN. |
| 32 | VAGND | power_in | Analog reference ground for the VADC, must be at VSSM minus 0.05 V or higher. |
| 33 | VAREF | power_in | Analog reference voltage for the VADC, between VAGND plus 1 V and VDDA plus 0.05 V. |
| 34 | VSSA | power_in | Analog ground supply pin. |
| 35 | VDDA | power_in | Analog supply pin for the ADC and DAC. |
| 36 | P14.9 | bidirectional | Port 14 bit 9 analog input shared with DAC output, pad class AN/DAC/DIG_IN. |
| 37 | P14.8 | bidirectional | Port 14 bit 8 analog input shared with DAC output, pad class AN/DAC/DIG_IN. |
| 38 | P15.9 | bidirectional | Port 15 bit 9 analog/digital input, pad class AN/DIG_IN. |
| 39 | P15.8 | bidirectional | Port 15 bit 8 analog/digital input, pad class AN/DIG_IN. |
| 40 | P2.15 | bidirectional | Port 2 bit 15 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 41 | P2.14 | bidirectional | Port 2 bit 14 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 42 | VDDC | power_in | Core supply pin, to be connected with an external buffer capacitor of 10 µF plus 100 nF per VDDC pin. |
| 43 | VDDP | power_in | Digital I/O pad supply pin. |
| 44 | P2.10 | bidirectional | Port 2 bit 10 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 45 | P2.9 | bidirectional | Port 2 bit 9 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 46 | P2.8 | bidirectional | Port 2 bit 8 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 47 | P2.5 | bidirectional | Port 2 bit 5 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 48 | P2.4 | bidirectional | Port 2 bit 4 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 49 | P2.3 | bidirectional | Port 2 bit 3 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 50 | P2.2 | bidirectional | Port 2 bit 2 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 51 | P2.1 | bidirectional | Port 2 bit 1 general-purpose I/O, pad class A2; after system reset, via HWSEL this pin selects the DB.TDO function. |
| 52 | P2.0 | bidirectional | Port 2 bit 0 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 53 | P2.7 | bidirectional | Port 2 bit 7 general-purpose I/O, pad class A1+; default direct input with no pull device after reset. |
| 54 | P2.6 | bidirectional | Port 2 bit 6 general-purpose I/O, pad class A1+; default direct input with no pull device after reset. |
| 55 | P5.7 | bidirectional | Port 5 bit 7 general-purpose I/O, pad class A1+; default direct input with no pull device after reset. |
| 56 | P5.2 | bidirectional | Port 5 bit 2 general-purpose I/O, pad class A1+; default direct input with no pull device after reset. |
| 57 | P5.1 | bidirectional | Port 5 bit 1 general-purpose I/O, pad class A1+; default direct input with no pull device after reset. |
| 58 | P5.0 | bidirectional | Port 5 bit 0 general-purpose I/O, pad class A1+; default direct input with no pull device after reset. |
| 59 | VSS | power_in | Digital ground supply pin. |
| 60 | VDDP | power_in | Digital I/O pad supply pin. |
| 61 | XTAL1 | input | Oscillator input for external crystal or direct clock input, direct input frequency 4 to 40 MHz and crystal frequency 4 to 25 MHz. |
| 62 | XTAL2 | output | Oscillator output for external crystal operation. |
| 63 | VSSO | power_in | Ground supply pin for the oscillator circuit. |
| 64 | VDDC | power_in | Core supply pin, to be connected with an external buffer capacitor of 10 µF plus 100 nF per VDDC pin. |
| 65 | PORST | input | Power-on reset input with weak pull-up permanently active and strong pull-down controlled by EVR. |
| 66 | TMS | input | JTAG test mode select input with weak pull-up active. |
| 67 | TCK | input | JTAG test clock input with weak pull-down active. |
| 68 | P1.15 | bidirectional | Port 1 bit 15 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 69 | P1.14 | bidirectional | Port 1 bit 14 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 70 | P1.13 | bidirectional | Port 1 bit 13 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 71 | P1.12 | bidirectional | Port 1 bit 12 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 72 | P1.11 | bidirectional | Port 1 bit 11 general-purpose I/O, pad class A1+; default direct input with no pull device after reset. |
| 73 | P1.10 | bidirectional | Port 1 bit 10 general-purpose I/O, pad class A1+; default direct input with no pull device after reset. |
| 74 | P1.5 | bidirectional | Port 1 bit 5 general-purpose I/O, pad class A1+; default direct input with no pull device after reset. |
| 75 | P1.4 | bidirectional | Port 1 bit 4 general-purpose I/O, pad class A1+; default direct input with no pull device after reset. |
| 76 | P1.3 | bidirectional | Port 1 bit 3 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 77 | P1.2 | bidirectional | Port 1 bit 2 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 78 | P1.1 | bidirectional | Port 1 bit 1 general-purpose I/O, pad class A1+; default direct input with no pull device after reset. |
| 79 | P1.0 | bidirectional | Port 1 bit 0 general-purpose I/O, pad class A1+; default direct input with no pull device after reset. |
| 80 | P1.9 | bidirectional | Port 1 bit 9 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 81 | P1.8 | bidirectional | Port 1 bit 8 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 82 | P1.7 | bidirectional | Port 1 bit 7 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 83 | P1.6 | bidirectional | Port 1 bit 6 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 84 | P4.1 | bidirectional | Port 4 bit 1 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 85 | P4.0 | bidirectional | Port 4 bit 0 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 86 | VDDC | power_in | Core supply pin, to be connected with an external buffer capacitor of 10 µF plus 100 nF per VDDC pin. |
| 87 | VDDP | power_in | Digital I/O pad supply pin. |
| 88 | P0.8 | bidirectional | Port 0 bit 8 general-purpose I/O, pad class A2; after system reset, via HWSEL this pin selects the DB.TRST function with a weak pull-down active. |
| 89 | P0.7 | bidirectional | Port 0 bit 7 general-purpose I/O, pad class A2; after system reset, via HWSEL this pin selects the DB.TDI function. |
| 90 | P3.6 | bidirectional | Port 3 bit 6 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 91 | P3.5 | bidirectional | Port 3 bit 5 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 92 | P3.4 | bidirectional | Port 3 bit 4 general-purpose I/O, pad class A1+; default direct input with no pull device after reset. |
| 93 | P3.3 | bidirectional | Port 3 bit 3 general-purpose I/O, pad class A1+; default direct input with no pull device after reset. |
| 94 | P0.12 | bidirectional | Port 0 bit 12 general-purpose I/O, pad class A1+; default direct input with no pull device after reset. |
| 95 | P0.11 | bidirectional | Port 0 bit 11 general-purpose I/O, pad class A1+; default direct input with no pull device after reset. |
| 96 | P0.6 | bidirectional | Port 0 bit 6 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 97 | P0.5 | bidirectional | Port 0 bit 5 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 98 | P0.4 | bidirectional | Port 0 bit 4 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 99 | P0.3 | bidirectional | Port 0 bit 3 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 100 | P0.2 | bidirectional | Port 0 bit 2 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Infineon Technologies |
| Package | LQFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage temperature | TST | -65 | 150 | °C | 38 | ||
| Junction temperature | TJ | -40 | 150 | °C | 38 | ||
| Voltage at 3.3 V power supply pins with respect to VSS | VDDP | 4.3 | V | 38 | |||
| Voltage on any Class A and dedicated input pin with respect to VSS | VIN | -1 | V | max. VDDP + 1.0 V or 4.3 V, whichever is lower | 38 | ||
| Voltage on any analog input pin with respect to VAGND | VAIN | -1 | V | max. VDDP + 1.0 V or 4.3 V, whichever is lower | 38 | ||
| Input current on any pin during overload condition | IIN | -10 | 10 | mA | 38 | ||
| Absolute maximum sum of all input circuit currents for one port group during overload condition | ΣIIN | -25 | 25 | mA | port groups defined in Table 16 | 38 | |
| Absolute maximum sum of all input circuit currents during overload condition | ΣIIN | -100 | 100 | mA | 38 | ||
| Ambient Temperature | TA | -40 | 85 | °C | Temp. Range F | 43 | |
| Analog ground voltage for VDDA | VSSA | -0.1 | 0 | 0.1 | V | 43 | |
| System Frequency | fSYS | 120 | MHz | 43 | |||
| Short circuit current of digital outputs | ISC | -5 | 5 | mA | 43 | ||
| Absolute sum of short circuit currents per pin group | ΣISC_PG | 20 | mA | port groups defined in Table 16 | 43 | ||
| Absolute sum of short circuit currents of the device | ΣISC_D | 100 | mA | 43 | |||
| Thermal resistance Junction-Ambient, PG-LQFP-100-11 | RΘJA | 23 | K/W | TJ ≤ 150 °C | 117 | ||
| Thermal resistance Junction-Ambient, PG-LQFP-100-25 | RΘJA | 21 | K/W | TJ ≤ 150 °C | 117 | ||
| Pin capacitance (digital inputs/outputs) | CIO | 10 | pF | 44 | |||
| Pull-down current | /IPDL/ | 150 | μA | VIN ≥ 0.6 × VDDP | 44 | ||
| Pull-down current | /IPDL/ | 10 | μA | VIN ≤ 0.36 × VDDP | 44 | ||
| Pull-up current | /IPUH/ | 10 | μA | VIN ≥ 0.6 × VDDP | 44 | ||
| Pull-up current | /IPUH/ | 100 | μA | VIN ≤ 0.36 × VDDP | 44 | ||
| PORST spike filter always blocked pulse duration | tSF1 | 10 | ns | 44 | |||
| PORST spike filter pass-through pulse duration | tSF2 | 100 | ns | 44 | |||
| PORST pull-down current | /IPPD/ | 13 | mA | VIN = 1.0 V | 44 | ||
| Input leakage current (Class A1) | IOZA1 | -500 | 500 | nA | 0 V ≤ VIN ≤ VDDP | 46 | |
| Output high voltage, POD = weak | VOHA1 | 2.4 | V | IOH ≥ -500 μA | 46 | ||
| Output high voltage, POD = medium | VOHA1 | 2.4 | V | IOH ≥ -2 mA | 46 | ||
| Output low voltage, POD = weak | VOLA1 | 0.4 | V | IOL ≤ 500 μA; POD = weak | 46 | ||
| Output low voltage, POD = medium | VOLA1 | 0.4 | V | IOL ≤ 2 mA; POD = medium | 46 | ||
| Fall time, POD = weak | tFA1 | 150 | ns | CL = 20 pF; POD = weak | 46 | ||
| Input leakage current (Class A1+) | IOZA1+ | -1 | 1 | μA | 0V ≤ VIN ≤ VDDP | 46 | |
| Input leakage at analog inputs | IOZ1 | -100 | 200 | nA | 0.03 × VDDA < VAIN < 0.97 × VDDA | 50 | |
| Input leakage at analog inputs | IOZ1 | -500 | 100 | nA | 0 V ≤ VAIN ≤ 0.03 × VDDA | 50 | |
| Input leakage at analog inputs | IOZ1 | -100 | 500 | nA | 0.97 × VDDA ≤ VAIN ≤ VDDA | 50 | |
| Input leakage current at VAREF | IOZ2 | -1 | 1 | μA | 0V ≤ VAREF ≤ VDDA | 50 | |
| Internal ADC clock | fADCI | 2 | 30 | MHz | VDDA = 3.3 V | 50 | |
| Total Unadjusted Error | TUE | -4 | 4 | LSB | 12-bit resolution; VDDA = 3.3 V; VAREF = VDDA | 51 | |
| Worst case ADC VDDA power supply current per active converter | IDDAA | 1.5 | 2 | mA | during conversion; VDDP = 3.6 V, TJ = 150 °C | 51 | |
| RMS Noise | ENRMS | 12 | LSB | 51 | |||
| ON resistance for the ADC test (pull down for AIN7) | RAIN7T | 180 | 550 | 900 | Ohm | 51 | |
| Recommended DAC RMS supply current | IDD | 2.5 | 4 | mA | per active DAC channel, without load currents of DAC outputs | 55 | |
| Integral non-linearity | INL | -4 | 2.5 | 4 | LSB | RL ≥ 5 kOhm, CL ≤ 50 pF | 55 |
| Gain error | EDG_IN | -6.5 | -1.5 | 3 | % | 55 | |
| DC Switching Level | VODC | 100 | 125 | 200 | mV | VAIN ≥ VAREF + VODC | 58 |
| Release Delay | tORD | 65 | 105 | ns | VAIN ≤ VAREF | 58 | |
| Temperature sensor range | TSR | -40 | 150 | °C | 60 | ||
| Input high voltage (driven) | VIH | 2 | V | 62 | |||
| Output high voltage | VOH | 2.8 | 3.6 | V | 15 kOhm pull-down to 0 V | 62 | |
| Output low voltage | VOL | 0 | 0.3 | V | 1.5 kOhm pull-up to 3.6 V | 62 | |
| DP, DM pull-down resistor | RPD | 14.25 | 24.8 | kOhm | 62 | ||
| DP pull-up resistor (idle bus) | RPUI | 900 | 1575 | Ohm | 62 | ||
| Worst case active supply current | IDDPA | 180 | mA | VDDP = 3.6 V, TJ = 150 °C | 68 | ||
| IDDP current at PORST Low | IDDP_PORST | 16 | mA | VDDP = 3.6 V, TJ = 150 °C | 68 | ||
| Power Dissipation | PDISS | 1 | W | VDDP = 3.6 V, TJ = 150 °C | 68 | ||
| VCO frequency range | fVCO | 260 | 520 | MHz | 75 | ||
| VCO input frequency | fREF | 4 | 16 | MHz | 75 | ||
| Peak-to-peak input amplitude at RTC_XTAL1 | VPPX | 0.4 | V | 66 |
CAD (KiCad official)
- Symbol:
XMC4500-F100F1024 AC - Footprint:
Package_QFP:LQFP-100_14x14mm_P0.5mm - 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files:
xmc4500-f100f1024-ac-etched.step/xmc4500-f100f1024-ac-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xmc4500-f100f1024-ac.step/xmc4500-f100f1024-ac.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Infineon Technologies datasheet (125 pp, sha256
0493b3f53a2fd45c, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# XMC4500-F100F1024 AC
**Infineon Technologies** · Infineon · LQFP-100(14x14)
XMC4500-F100F1024 AC from Infineon Technologies, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P0.1 | bidirectional | Port 0 bit 1 general-purpose I/O, pad class A1+, alternate functions include USB.DRIVEVBUS; default direct input with no pull device after reset. |
| 2 | P0.0 | bidirectional | Port 0 bit 0 general-purpose I/O, pad class A1+, alternate functions include CAN.N0_TXD; default direct input with no pull device after reset. |
| 3 | P0.10 | bidirectional | Port 0 bit 10 general-purpose I/O, pad class A1+, alternate functions include ETH0.MDC; default direct input with no pull device after reset. |
| 4 | P0.9 | bidirectional | Port 0 bit 9 general-purpose I/O, pad class A2, alternate functions include USB.ID; default direct input with no pull device after reset. |
| 5 | P3.2 | bidirectional | Port 3 bit 2 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 6 | P3.1 | bidirectional | Port 3 bit 1 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 7 | P3.0 | bidirectional | Port 3 bit 0 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 8 | USB_DM | bidirectional | USB OTG data line D-minus, compliant to USB Rev. 2.0; High-Speed Mode is not supported. |
| 9 | USB_DP | bidirectional | USB OTG data line D-plus, compliant to USB Rev. 2.0; High-Speed Mode is not supported. |
| 10 | VBUS | power_in | USB OTG VBUS input, valid input voltage range 0.0 V to 5.25 V. |
| 11 | VDDP | power_in | Digital I/O pad supply pin. |
| 12 | VDDC | power_in | Core supply pin, to be connected with an external buffer capacitor of 10 µF plus 100 nF per VDDC pin. |
| 13 | HIB_IO_1 | bidirectional | Hibernate domain I/O pin 1, medium driver mode active as output; configured as input with no pull device after first power-up. |
| 14 | HIB_IO_0 | bidirectional | Hibernate domain I/O pin 0, configured as open-drain output driving 0 after first power-up and after hibernate domain reset. |
| 15 | RTC_XTAL1 | input | RTC oscillator input for 32.768 kHz crystal, input amplitude at least 0.4 V peak-to-peak. |
| 16 | RTC_XTAL2 | output | RTC oscillator output for 32.768 kHz crystal. |
| 17 | VBAT | power_in | Backup supply for the hibernate domain and RTC; when VDDP is supplied VBAT has to be supplied as well, and crystal start requires VBAT of at least 3.0 V. |
| 18 | P15.3 | bidirectional | Port 15 bit 3 analog/digital input, pad class AN/DIG_IN. |
| 19 | P15.2 | bidirectional | Port 15 bit 2 analog/digital input, pad class AN/DIG_IN. |
| 20 | P14.15 | bidirectional | Port 14 bit 15 analog/digital input, pad class AN/DIG_IN. |
| 21 | P14.14 | bidirectional | Port 14 bit 14 analog/digital input, pad class AN/DIG_IN. |
| 22 | P14.13 | bidirectional | Port 14 bit 13 analog/digital input, pad class AN/DIG_IN. |
| 23 | P14.12 | bidirectional | Port 14 bit 12 analog/digital input, pad class AN/DIG_IN. |
| 24 | P14.7 | bidirectional | Port 14 bit 7 analog/digital input, pad class AN/DIG_IN. |
| 25 | P14.6 | bidirectional | Port 14 bit 6 analog/digital input, pad class AN/DIG_IN. |
| 26 | P14.5 | bidirectional | Port 14 bit 5 analog/digital input, pad class AN/DIG_IN. |
| 27 | P14.4 | bidirectional | Port 14 bit 4 analog/digital input, pad class AN/DIG_IN. |
| 28 | P14.3 | bidirectional | Port 14 bit 3 analog/digital input, pad class AN/DIG_IN. |
| 29 | P14.2 | bidirectional | Port 14 bit 2 analog/digital input, pad class AN/DIG_IN. |
| 30 | P14.1 | bidirectional | Port 14 bit 1 analog/digital input, pad class AN/DIG_IN. |
| 31 | P14.0 | bidirectional | Port 14 bit 0 analog/digital input, pad class AN/DIG_IN. |
| 32 | VAGND | power_in | Analog reference ground for the VADC, must be at VSSM minus 0.05 V or higher. |
| 33 | VAREF | power_in | Analog reference voltage for the VADC, between VAGND plus 1 V and VDDA plus 0.05 V. |
| 34 | VSSA | power_in | Analog ground supply pin. |
| 35 | VDDA | power_in | Analog supply pin for the ADC and DAC. |
| 36 | P14.9 | bidirectional | Port 14 bit 9 analog input shared with DAC output, pad class AN/DAC/DIG_IN. |
| 37 | P14.8 | bidirectional | Port 14 bit 8 analog input shared with DAC output, pad class AN/DAC/DIG_IN. |
| 38 | P15.9 | bidirectional | Port 15 bit 9 analog/digital input, pad class AN/DIG_IN. |
| 39 | P15.8 | bidirectional | Port 15 bit 8 analog/digital input, pad class AN/DIG_IN. |
| 40 | P2.15 | bidirectional | Port 2 bit 15 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 41 | P2.14 | bidirectional | Port 2 bit 14 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 42 | VDDC | power_in | Core supply pin, to be connected with an external buffer capacitor of 10 µF plus 100 nF per VDDC pin. |
| 43 | VDDP | power_in | Digital I/O pad supply pin. |
| 44 | P2.10 | bidirectional | Port 2 bit 10 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 45 | P2.9 | bidirectional | Port 2 bit 9 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 46 | P2.8 | bidirectional | Port 2 bit 8 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 47 | P2.5 | bidirectional | Port 2 bit 5 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 48 | P2.4 | bidirectional | Port 2 bit 4 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 49 | P2.3 | bidirectional | Port 2 bit 3 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 50 | P2.2 | bidirectional | Port 2 bit 2 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 51 | P2.1 | bidirectional | Port 2 bit 1 general-purpose I/O, pad class A2; after system reset, via HWSEL this pin selects the DB.TDO function. |
| 52 | P2.0 | bidirectional | Port 2 bit 0 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 53 | P2.7 | bidirectional | Port 2 bit 7 general-purpose I/O, pad class A1+; default direct input with no pull device after reset. |
| 54 | P2.6 | bidirectional | Port 2 bit 6 general-purpose I/O, pad class A1+; default direct input with no pull device after reset. |
| 55 | P5.7 | bidirectional | Port 5 bit 7 general-purpose I/O, pad class A1+; default direct input with no pull device after reset. |
| 56 | P5.2 | bidirectional | Port 5 bit 2 general-purpose I/O, pad class A1+; default direct input with no pull device after reset. |
| 57 | P5.1 | bidirectional | Port 5 bit 1 general-purpose I/O, pad class A1+; default direct input with no pull device after reset. |
| 58 | P5.0 | bidirectional | Port 5 bit 0 general-purpose I/O, pad class A1+; default direct input with no pull device after reset. |
| 59 | VSS | power_in | Digital ground supply pin. |
| 60 | VDDP | power_in | Digital I/O pad supply pin. |
| 61 | XTAL1 | input | Oscillator input for external crystal or direct clock input, direct input frequency 4 to 40 MHz and crystal frequency 4 to 25 MHz. |
| 62 | XTAL2 | output | Oscillator output for external crystal operation. |
| 63 | VSSO | power_in | Ground supply pin for the oscillator circuit. |
| 64 | VDDC | power_in | Core supply pin, to be connected with an external buffer capacitor of 10 µF plus 100 nF per VDDC pin. |
| 65 | PORST | input | Power-on reset input with weak pull-up permanently active and strong pull-down controlled by EVR. |
| 66 | TMS | input | JTAG test mode select input with weak pull-up active. |
| 67 | TCK | input | JTAG test clock input with weak pull-down active. |
| 68 | P1.15 | bidirectional | Port 1 bit 15 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 69 | P1.14 | bidirectional | Port 1 bit 14 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 70 | P1.13 | bidirectional | Port 1 bit 13 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 71 | P1.12 | bidirectional | Port 1 bit 12 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 72 | P1.11 | bidirectional | Port 1 bit 11 general-purpose I/O, pad class A1+; default direct input with no pull device after reset. |
| 73 | P1.10 | bidirectional | Port 1 bit 10 general-purpose I/O, pad class A1+; default direct input with no pull device after reset. |
| 74 | P1.5 | bidirectional | Port 1 bit 5 general-purpose I/O, pad class A1+; default direct input with no pull device after reset. |
| 75 | P1.4 | bidirectional | Port 1 bit 4 general-purpose I/O, pad class A1+; default direct input with no pull device after reset. |
| 76 | P1.3 | bidirectional | Port 1 bit 3 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 77 | P1.2 | bidirectional | Port 1 bit 2 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 78 | P1.1 | bidirectional | Port 1 bit 1 general-purpose I/O, pad class A1+; default direct input with no pull device after reset. |
| 79 | P1.0 | bidirectional | Port 1 bit 0 general-purpose I/O, pad class A1+; default direct input with no pull device after reset. |
| 80 | P1.9 | bidirectional | Port 1 bit 9 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 81 | P1.8 | bidirectional | Port 1 bit 8 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 82 | P1.7 | bidirectional | Port 1 bit 7 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 83 | P1.6 | bidirectional | Port 1 bit 6 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 84 | P4.1 | bidirectional | Port 4 bit 1 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 85 | P4.0 | bidirectional | Port 4 bit 0 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 86 | VDDC | power_in | Core supply pin, to be connected with an external buffer capacitor of 10 µF plus 100 nF per VDDC pin. |
| 87 | VDDP | power_in | Digital I/O pad supply pin. |
| 88 | P0.8 | bidirectional | Port 0 bit 8 general-purpose I/O, pad class A2; after system reset, via HWSEL this pin selects the DB.TRST function with a weak pull-down active. |
| 89 | P0.7 | bidirectional | Port 0 bit 7 general-purpose I/O, pad class A2; after system reset, via HWSEL this pin selects the DB.TDI function. |
| 90 | P3.6 | bidirectional | Port 3 bit 6 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 91 | P3.5 | bidirectional | Port 3 bit 5 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 92 | P3.4 | bidirectional | Port 3 bit 4 general-purpose I/O, pad class A1+; default direct input with no pull device after reset. |
| 93 | P3.3 | bidirectional | Port 3 bit 3 general-purpose I/O, pad class A1+; default direct input with no pull device after reset. |
| 94 | P0.12 | bidirectional | Port 0 bit 12 general-purpose I/O, pad class A1+; default direct input with no pull device after reset. |
| 95 | P0.11 | bidirectional | Port 0 bit 11 general-purpose I/O, pad class A1+; default direct input with no pull device after reset. |
| 96 | P0.6 | bidirectional | Port 0 bit 6 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 97 | P0.5 | bidirectional | Port 0 bit 5 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 98 | P0.4 | bidirectional | Port 0 bit 4 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 99 | P0.3 | bidirectional | Port 0 bit 3 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
| 100 | P0.2 | bidirectional | Port 0 bit 2 general-purpose I/O, pad class A2; default direct input with no pull device after reset. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Infineon Technologies |
| Package | LQFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage temperature | TST | -65 | | 150 | °C | | 38 |
| Junction temperature | TJ | -40 | | 150 | °C | | 38 |
| Voltage at 3.3 V power supply pins with respect to VSS | VDDP | | | 4.3 | V | | 38 |
| Voltage on any Class A and dedicated input pin with respect to VSS | VIN | -1 | | | V | max. VDDP + 1.0 V or 4.3 V, whichever is lower | 38 |
| Voltage on any analog input pin with respect to VAGND | VAIN | -1 | | | V | max. VDDP + 1.0 V or 4.3 V, whichever is lower | 38 |
| Input current on any pin during overload condition | IIN | -10 | | 10 | mA | | 38 |
| Absolute maximum sum of all input circuit currents for one port group during overload condition | ΣIIN | -25 | | 25 | mA | port groups defined in Table 16 | 38 |
| Absolute maximum sum of all input circuit currents during overload condition | ΣIIN | -100 | | 100 | mA | | 38 |
| Ambient Temperature | TA | -40 | | 85 | °C | Temp. Range F | 43 |
| Analog ground voltage for VDDA | VSSA | -0.1 | 0 | 0.1 | V | | 43 |
| System Frequency | fSYS | | | 120 | MHz | | 43 |
| Short circuit current of digital outputs | ISC | -5 | | 5 | mA | | 43 |
| Absolute sum of short circuit currents per pin group | ΣISC_PG | | | 20 | mA | port groups defined in Table 16 | 43 |
| Absolute sum of short circuit currents of the device | ΣISC_D | | | 100 | mA | | 43 |
| Thermal resistance Junction-Ambient, PG-LQFP-100-11 | RΘJA | | | 23 | K/W | TJ ≤ 150 °C | 117 |
| Thermal resistance Junction-Ambient, PG-LQFP-100-25 | RΘJA | | | 21 | K/W | TJ ≤ 150 °C | 117 |
| Pin capacitance (digital inputs/outputs) | CIO | | | 10 | pF | | 44 |
| Pull-down current | /IPDL/ | 150 | | | μA | VIN ≥ 0.6 × VDDP | 44 |
| Pull-down current | /IPDL/ | | | 10 | μA | VIN ≤ 0.36 × VDDP | 44 |
| Pull-up current | /IPUH/ | | | 10 | μA | VIN ≥ 0.6 × VDDP | 44 |
| Pull-up current | /IPUH/ | 100 | | | μA | VIN ≤ 0.36 × VDDP | 44 |
| PORST spike filter always blocked pulse duration | tSF1 | | | 10 | ns | | 44 |
| PORST spike filter pass-through pulse duration | tSF2 | 100 | | | ns | | 44 |
| PORST pull-down current | /IPPD/ | 13 | | | mA | VIN = 1.0 V | 44 |
| Input leakage current (Class A1) | IOZA1 | -500 | | 500 | nA | 0 V ≤ VIN ≤ VDDP | 46 |
| Output high voltage, POD = weak | VOHA1 | 2.4 | | | V | IOH ≥ -500 μA | 46 |
| Output high voltage, POD = medium | VOHA1 | 2.4 | | | V | IOH ≥ -2 mA | 46 |
| Output low voltage, POD = weak | VOLA1 | | | 0.4 | V | IOL ≤ 500 μA; POD = weak | 46 |
| Output low voltage, POD = medium | VOLA1 | | | 0.4 | V | IOL ≤ 2 mA; POD = medium | 46 |
| Fall time, POD = weak | tFA1 | | | 150 | ns | CL = 20 pF; POD = weak | 46 |
| Input leakage current (Class A1+) | IOZA1+ | -1 | | 1 | μA | 0V ≤ VIN ≤ VDDP | 46 |
| Input leakage at analog inputs | IOZ1 | -100 | | 200 | nA | 0.03 × VDDA < VAIN < 0.97 × VDDA | 50 |
| Input leakage at analog inputs | IOZ1 | -500 | | 100 | nA | 0 V ≤ VAIN ≤ 0.03 × VDDA | 50 |
| Input leakage at analog inputs | IOZ1 | -100 | | 500 | nA | 0.97 × VDDA ≤ VAIN ≤ VDDA | 50 |
| Input leakage current at VAREF | IOZ2 | -1 | | 1 | μA | 0V ≤ VAREF ≤ VDDA | 50 |
| Internal ADC clock | fADCI | 2 | | 30 | MHz | VDDA = 3.3 V | 50 |
| Total Unadjusted Error | TUE | -4 | | 4 | LSB | 12-bit resolution; VDDA = 3.3 V; VAREF = VDDA | 51 |
| Worst case ADC VDDA power supply current per active converter | IDDAA | | 1.5 | 2 | mA | during conversion; VDDP = 3.6 V, TJ = 150 °C | 51 |
| RMS Noise | ENRMS | | | 12 | LSB | | 51 |
| ON resistance for the ADC test (pull down for AIN7) | RAIN7T | 180 | 550 | 900 | Ohm | | 51 |
| Recommended DAC RMS supply current | IDD | | 2.5 | 4 | mA | per active DAC channel, without load currents of DAC outputs | 55 |
| Integral non-linearity | INL | -4 | 2.5 | 4 | LSB | RL ≥ 5 kOhm, CL ≤ 50 pF | 55 |
| Gain error | EDG_IN | -6.5 | -1.5 | 3 | % | | 55 |
| DC Switching Level | VODC | 100 | 125 | 200 | mV | VAIN ≥ VAREF + VODC | 58 |
| Release Delay | tORD | 65 | | 105 | ns | VAIN ≤ VAREF | 58 |
| Temperature sensor range | TSR | -40 | | 150 | °C | | 60 |
| Input high voltage (driven) | VIH | 2 | | | V | | 62 |
| Output high voltage | VOH | 2.8 | | 3.6 | V | 15 kOhm pull-down to 0 V | 62 |
| Output low voltage | VOL | 0 | | 0.3 | V | 1.5 kOhm pull-up to 3.6 V | 62 |
| DP, DM pull-down resistor | RPD | 14.25 | | 24.8 | kOhm | | 62 |
| DP pull-up resistor (idle bus) | RPUI | 900 | | 1575 | Ohm | | 62 |
| Worst case active supply current | IDDPA | | | 180 | mA | VDDP = 3.6 V, TJ = 150 °C | 68 |
| IDDP current at PORST Low | IDDP_PORST | | | 16 | mA | VDDP = 3.6 V, TJ = 150 °C | 68 |
| Power Dissipation | PDISS | | | 1 | W | VDDP = 3.6 V, TJ = 150 °C | 68 |
| VCO frequency range | fVCO | 260 | | 520 | MHz | | 75 |
| VCO input frequency | fREF | 4 | | 16 | MHz | | 75 |
| Peak-to-peak input amplitude at RTC_XTAL1 | VPPX | 0.4 | | | V | | 66 |
## CAD (KiCad official)
- Symbol: `XMC4500-F100F1024 AC`
- Footprint: `Package_QFP:LQFP-100_14x14mm_P0.5mm`
- 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files: `xmc4500-f100f1024-ac-etched.step` / `xmc4500-f100f1024-ac-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `xmc4500-f100f1024-ac.step` / `xmc4500-f100f1024-ac.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Infineon Technologies datasheet](docs/xmc4500-f100f1024-ac-datasheet.pdf) (125 pp, sha256 `0493b3f53a2fd45c`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/xmc4500-f100f1024-ac-datasheet.pdf)