Generated by kicad-footprint-generator · KiCad file format 20260206
XMC4108Q48K64BAXUMA1
Infineon Technologies · Microcontroller Units (MCUs/MPUs/SOCs) · VQFN-48-EP(7x7)
XMC4108Q48K64BAXUMA1 from Infineon Technologies, in a VQFN-48-EP(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P0.1 | bidirectional | General-purpose port pin P0.1 (A1+ pad) with alternate functions such as U1C1.DOUT0 and CCU80.OUT11, configured as direct input with no pull device after reset. |
| 2 | P0.0 | bidirectional | General-purpose port pin P0.0 (A1+ pad) with alternate functions such as CAN.N0_TXD and USB.VBUSDETECT A, configured as direct input with no pull device after reset. |
| 3 | USB_DM | bidirectional | USB device data line D- (special pad) compliant with USB Rev. 2.0 Full-Speed, with driver output resistance of 28 to 44 Ohm. |
| 4 | USB_DP | bidirectional | USB device data line D+ (special pad) compliant with USB Rev. 2.0 Full-Speed, with DP pull-up resistor of 900 to 1575 Ohm on an idle bus. |
| 5 | VDDP | power_in | Digital pad supply pin; all VDDP pins must be externally connected to one VDDP net with 100 nF per pin plus a 10 µF capacitor on the net. |
| 6 | VDDC | power_in | Core supply pin; VDDC pins must be connected together with 100 nF per pin and an external buffer capacitor of 3 to 6 µF (4.7 µF typical). |
| 7 | HIB_IO_0 | bidirectional | Hibernate domain I/O pin (special pad) that is configured as open-drain output driving 0 at the first power-up and after every hibernate domain reset. |
| 8 | RTC_XTAL1 | input | Input of the 32.768 kHz RTC oscillator, supplied from VBAT, with input high voltage of 0.6 x VBAT to VBAT + 0.3 V. |
| 9 | RTC_XTAL2 | output | Output of the 32.768 kHz RTC oscillator (clock_O) for the crystal connected between RTC_XTAL1 and RTC_XTAL2. |
| 10 | VBAT | power_in | Backup supply for the hibernate domain and RTC, operating from 2.1 to 3.6 V, which must also be supplied whenever VDDP is supplied. |
| 11 | P14.7 | bidirectional | Analog/digital input pin P14.7 (AN/DIG_IN) mapped to VADC G0CH7 and POSIF0.IN0B. |
| 12 | P14.6 | bidirectional | Analog/digital input pin P14.6 (AN/DIG_IN) mapped to VADC G0CH6, POSIF0.IN1B and G0ORC6. |
| 13 | P14.5 | bidirectional | Analog/digital input pin P14.5 (AN/DIG_IN) mapped to VADC G0CH5 and POSIF0.IN2B. |
| 14 | P14.4 | bidirectional | Analog/digital input pin P14.4 (AN/DIG_IN) mapped to VADC G0CH4. |
| 15 | P14.3 | bidirectional | Analog/digital input pin P14.3 (AN/DIG_IN) mapped to VADC G0CH3, G1CH3 and CAN.N0_RXDB. |
| 16 | P14.0 | bidirectional | Analog/digital input pin P14.0 (AN/DIG_IN) mapped to VADC G0CH0. |
| 17 | VSSA/VAGND | power_in | Shared analog ground pin serving as VSSA supply ground and VAGND alternate reference ground for the ADC. |
| 18 | VDDA/VAREF | power_in | Shared analog supply and reference voltage pin serving as VDDA supply and VAREF for the ADC, where the alternate reference must be at least 1 V above VAGND. |
| 19 | P14.9 | bidirectional | Analog/DAC/digital input pin P14.9 (AN/DAC/DIG_IN) mapped to DAC.OUT_1 and VADC G1CH1. |
| 20 | P14.8 | bidirectional | Analog/DAC/digital input pin P14.8 (AN/DAC/DIG_IN) mapped to DAC.OUT_0 and VADC G1CH0. |
| 21 | P2.5 | bidirectional | General-purpose port pin P2.5 (A1+ pad) with alternate functions such as CCU41.OUT0 and HRPWM0.BL2A, configured as direct input with no pull device after reset. |
| 22 | P2.4 | bidirectional | General-purpose port pin P2.4 (A1+ pad) with alternate functions such as VADC.EMUX02 and CCU41.OUT1, configured as direct input with no pull device after reset. |
| 23 | P2.3 | bidirectional | General-purpose port pin P2.3 (A1+ pad) with alternate functions such as VADC.EMUX01 and CCU41.OUT2, configured as direct input with no pull device after reset. |
| 24 | P2.2 | bidirectional | General-purpose port pin P2.2 (A1+ pad) with alternate functions such as VADC.EMUX00 and CCU41.OUT3, configured as direct input with no pull device after reset. |
| 25 | P2.1 | bidirectional | General-purpose port pin P2.1 (A1+ pad) which after a system reset selects the DB.TDO/TRACESWO function via HWSEL. |
| 26 | P2.0 | bidirectional | General-purpose port pin P2.0 (A1+ pad) with alternate functions such as CAN.N0_TXD and LEDTS0.COL1, configured as direct input with no pull device after reset. |
| 27 | VSS | power_in | Digital ground pin; all VSS, VSSA and VSSO pins share the common ground potential. |
| 28 | VDDP | power_in | Digital pad supply pin; all VDDP pins must be externally connected to one VDDP net. |
| 29 | XTAL1 | input | Input to the main oscillator inverting amplifier, operating with a 4 to 25 MHz external crystal or 4 to 40 MHz direct input clock. |
| 30 | XTAL2 | output | Output of the main oscillator amplifier (clock_O) for connection of the external crystal in crystal mode. |
| 31 | VDDC | power_in | Core supply pin; VDDC pins must be connected together with 100 nF per pin and the external buffer capacitor. |
| 32 | PORST | input | Power-on reset pin (special pad) with strong pull-down controlled by the EVR and weak pull-up active while the strong pull-down is not active. |
| 33 | TMS | bidirectional | Debug pin TMS/SWDIO (A1+ pad) with weak pull-up active and strong-soft driver mode active as output. |
| 34 | TCK | input | Debug clock pin TCK/SWCLK (A1 pad) with weak pull-down active. |
| 35 | P1.5 | bidirectional | General-purpose port pin P1.5 (A1+ pad) with alternate functions such as CAN.N1_TXD and U0C0.DOUT0, configured as direct input with no pull device after reset. |
| 36 | P1.4 | bidirectional | General-purpose port pin P1.4 (A1+ pad) with alternate functions such as CAN.N0_TXD and CCU80.OUT33, configured as direct input with no pull device after reset. |
| 37 | P1.3 | bidirectional | General-purpose port pin P1.3 (A1+ pad) with alternate functions such as U0C0.MCLKOUT and CCU40.OUT0, configured as direct input with no pull device after reset. |
| 38 | P1.2 | bidirectional | General-purpose port pin P1.2 (A1+ pad) with alternate functions such as CCU40.OUT1 and POSIF0.IN1A, configured as direct input with no pull device after reset. |
| 39 | P1.1 | bidirectional | General-purpose port pin P1.1 (A1+ pad) with alternate functions such as U0C0.SCLKOUT and CCU40.OUT2, configured as direct input with no pull device after reset. |
| 40 | P1.0 | bidirectional | General-purpose port pin P1.0 (A1+ pad) with alternate functions such as U0C0.SELO0 and CCU40.OUT3, configured as direct input with no pull device after reset. |
| 41 | VDDP | power_in | Digital pad supply pin; all VDDP pins must be externally connected to one VDDP net. |
| 42 | P0.8 | bidirectional | General-purpose port pin P0.8 (A1+ pad) which after a system reset selects the DB.TRST function via HWSEL, with a weak pull-down active. |
| 43 | P0.7 | bidirectional | General-purpose port pin P0.7 (A1+ pad) which after a system reset selects the DB.TDI function via HWSEL. |
| 44 | P0.6 | bidirectional | General-purpose port pin P0.6 (A1+ pad) with alternate functions such as U0C0.SELO0 and CCU80.OUT30, configured as direct input with no pull device after reset. |
| 45 | P0.5 | bidirectional | General-purpose port pin P0.5 (A1+ pad) with alternate functions such as U1C0.DOUT0 and CCU80.OUT00, configured as direct input with no pull device after reset. |
| 46 | P0.4 | bidirectional | General-purpose port pin P0.4 (A1+ pad) with alternate functions such as CCU80.OUT10 and U1C0.DOUT1, configured as direct input with no pull device after reset. |
| 47 | P0.3 | bidirectional | General-purpose port pin P0.3 (A1+ pad) with alternate functions such as CCU80.OUT20 and U1C0.DOUT2, configured as direct input with no pull device after reset. |
| 48 | P0.2 | bidirectional | General-purpose port pin P0.2 (A1+ pad) with alternate functions such as U1C1.SELO1 and CCU80.OUT01, configured as direct input with no pull device after reset. |
| 49 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Infineon Technologies |
| Package | VQFN-48-EP(7x7) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 49 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient Temperature | TA | -40 | 125 | °C | Temp. Range K | 29 | |
| ADC analog supply voltage | VDDA | 3 | 3.3 | 3.62 | V | 29 | |
| Analog ground voltage for VDDA | VSSA | -0.1 | 0 | 0.1 | V | 29 | |
| Digital ground voltage | VSS | 0 | V | 29 | |||
| System Frequency | fSYS | 80 | MHz | 29 | |||
| Short circuit current of digital outputs | ISC | -5 | 5 | mA | 29 | ||
| Absolute sum of short circuit currents per pin group | ΣISC_PG | 20 | mA | 29 | |||
| Absolute sum of short circuit currents of the device | ΣISC_D | 100 | mA | 29 | |||
| Storage temperature | TST | -65 | 150 | °C | 24 | ||
| Junction temperature | TJ | -40 | 150 | °C | 24 | ||
| Voltage at 3.3 V power supply pins with respect to VSS | VDDP | 4.3 | V | 24 | |||
| Voltage on any Class A and dedicated input pin with respect to VSS | VIN | -1 | V | VDDP + 1.0 or max. 4.3 V whichever is lower | 24 | ||
| Input current on any pin during overload condition | IIN | -10 | 10 | mA | 24 | ||
| Absolute maximum sum of all input circuit currents for one port group during overload condition | ΣIIN | -25 | 25 | mA | 24 | ||
| Absolute maximum sum of all input circuit currents during overload condition | ΣIIN | -100 | 100 | mA | 25 | ||
| Input current on any port pin during overload condition | IOV | -5 | 5 | mA | 26 | ||
| Thermal resistance Junction-Ambient PG-VQFN-48-71 | RΘJA | 34.8 | K/W | Device mounted on a 4-layer JEDEC board (JESD 51-7) with thermal vias; exposed pad soldered. | 71 | ||
| Pin capacitance (digital inputs/outputs) | CIO | 10 | pF | 30 | |||
| Pull-down current | /IPDL/ | 150 | μA | VIN ≥ 0.6 × VDDP | 30 | ||
| Pull-down current | /IPDL/ | 10 | μA | VIN ≤ 0.36 × VDDP | 30 | ||
| Pull-up current | /IPUH/ | 100 | μA | VIN ≤ 0.36 × VDDP | 30 | ||
| Pull-up current | /IPUH/ | 10 | μA | VIN ≥ 0.6 × VDDP | 30 | ||
| Input leakage current Class_A1 | IOZA1 | -500 | 500 | nA | 0 V ≤ VIN ≤ VDDP | 31 | |
| Output high voltage, POD = weak, Class_A1 | VOHA1 | 2.4 | V | IOH ≥ -500 μA | 31 | ||
| Output low voltage Class_A1, POD = weak | VOLA1 | 0.4 | V | IOL ≤ 500 μA; POD = weak | 31 | ||
| Fall time Class_A1 | tFA1 | 150 | ns | CL = 20 pF; POD = weak | 32 | ||
| Fall time Class_A1 | tFA1 | 50 | ns | CL = 50 pF; POD = medium | 32 | ||
| Input leakage current Class_A1+ | IOZA1+ | -1 | 1 | µA | 0 V ≤ VIN ≤ VDDP | 32 | |
| Output high voltage, POD = weak, Class_A1+ | VOHA1+ | 2.4 | V | IOH ≥ -500 μA | 32 | ||
| Output low voltage Class_A1+, POD = strong | VOLA1+ | 0.4 | V | IOL ≤ 2 mA; POD = strong | 33 | ||
| Fall time Class_A1+, strong, soft edge | tFA1+ | 16 | ns | CL = 50 pF; POD = strong; edge = soft | 33 | ||
| Input leakage current HIB_IO | IOZHIB | -500 | 500 | nA | 0 V ≤ VIN ≤ VBAT | 33 | |
| Output low voltage HIB_IO | VOLHIB | 0.4 | V | IOL ≤ 2 mA | 33 | ||
| Total Unadjusted Error | TUE | -6 | 6 | LSB | 12-bit resolution; VDDA = 3.3 V; VAREF = VDDA | 35 | |
| Differential Non-Linearity Error | EADNL | -4.5 | 4.5 | LSB | 35 | ||
| Gain Error | EAGAIN | -6 | 6 | LSB | 35 | ||
| Integral Non-Linearity | EAINL | -4.5 | 4.5 | LSB | 35 | ||
| Offset Error | EAOFF | -6 | 6 | LSB | 35 | ||
| Internal ADC clock | fADCI | 2 | 30 | MHz | VDDA = 3.3 V | 34 | |
| Worst case ADC VDDA power supply current per active converter | IDDAA | 1.5 | 2 | mA | during conversion | 35 | |
| ON resistance of the analog input path | RAIN | 600 | 1200 | Ohm | 35 | ||
| RMS Noise | ENRMS | 1 | 2 | LSB | 35 | ||
| DAC RMS supply current | IDD | 2.5 | 4 | mA | per active DAC channel, without load currents of DAC outputs | 38 | |
| Integral non-linearity | INL | -5.5 | 5.5 | LSB | RL ≥ 5 kOhm, CL ≤ 50 pF | 38 | |
| Differential non-linearity | DNL | -2 | 2 | LSB | RL ≥ 5 kOhm, CL ≤ 50 pF | 38 | |
| Offset error | EDOFF | -20 | 20 | mV | 38 | ||
| Gain error | EDG_IN | -5 | 5 | % | 38 | ||
| Load resistance | RL | 5 | kOhm | 39 | |||
| Load capacitance | CL | 50 | pF | 39 | |||
| Input frequency | fOSC | 4 | 40 | MHz | Direct Input Mode selected | 51 | |
| Input frequency | fOSC | 4 | 25 | MHz | External Crystal Mode selected | 51 | |
| Input low voltage at XTAL1 | VILBX | -0.5 | 0.4 | V | 51 | ||
| Fast internal clock source accuracy, automatic calibration | ΔfOFI | -0.5 | 0.5 | % | automatic calibration; error in addition to accuracy of reference clock | 61 | |
| Internal clock nominal frequency, not calibrated | fOFINC | 36.5 | MHz | not calibrated | 61 | ||
| VDDC core supply voltage | VDDC | 1.3 | V | Generated internally | 29 | ||
| Short circuit current, digital outputs, output current source | IOUT_SOURCE | -30 | mA | 39 | |||
| Oscillator frequency RTC_XTAL | fOSC | 32.768 | kHz | 51 |
CAD (KiCad official)
- Symbol:
XMC4108Q48K64BAXUMA1 - Footprint:
Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm - 3D model: VQFN-48-EP(7x7) (KiCad packages3D, STEP)
- 3D model files:
xmc4108q48k64baxuma1-etched.step/xmc4108q48k64baxuma1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xmc4108q48k64baxuma1.step/xmc4108q48k64baxuma1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Infineon Technologies datasheet (76 pp, sha256
567918e8c1d90267, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).