Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

XM004

Shenzhen Fuman · Microcontroller Units (MCUs/MPUs/SOCs) · TSSOP-20

XM004 from Shenzhen Fuman, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 P2.0 bidirectional General-purpose I/O port P2.0, also usable as ADC input AN8 and external interrupt INT8.
2 P0.5 bidirectional General-purpose I/O port P0.5, also usable as ADC input AN5 and external interrupt INT5.
3 P0.4 bidirectional General-purpose I/O port P0.4, also usable as ADC input AN4, ADC external reference voltage input/output Vref, and external interrupt INT4.
4 P0.3 bidirectional General-purpose I/O port P0.3, also usable as ADC input AN3, external interrupt INT3, and SCK (two-wire mode clock input).
5 P0.2 bidirectional General-purpose I/O port P0.2, also usable as external interrupt INT2, PWM2 fault-detection input FLT2, and external crystal oscillator input XIN.
6 P0.1 bidirectional General-purpose I/O port P0.1, also usable as ADC input AN1, external interrupt INT1, PWM1 fault-detection input FLT1, and external crystal oscillator output XOUT.
7 GND power_in Power ground (0 V reference) for the device.
8 P0.0 bidirectional General-purpose I/O port P0.0, also usable as ADC input AN0, external interrupt INT0, and PWM0 fault-detection input FLT0.
9 VDD power_in Power supply input; the datasheet gives a working range of 2.0 V to 5.5 V and an absolute maximum of -0.3 V to +6.0 V.
10 P1.1 bidirectional General-purpose I/O port P1.1, software-configurable as external interrupt 1 input INT1_1.
11 P1.0 bidirectional General-purpose I/O port P1.0, software-configurable as external interrupt 0 input INT0_0.
12 P2.7 bidirectional General-purpose I/O port P2.7, also usable as external reset input RST and external interrupt INT15; it is the default reset pin and can be set to a normal I/O via code option.
13 P2.6 bidirectional General-purpose I/O port P2.6, also usable as external interrupt INT14 and port low-voltage detection input PLVD.
14 P2.5 bidirectional General-purpose I/O port P2.5, also usable as ADC input AN2 and external interrupt INT13.
15 P2.4 bidirectional General-purpose I/O port P2.4, also usable as external interrupt INT12.
16 P2.3 bidirectional General-purpose I/O port P2.3, also usable as external interrupt INT11.
17 P2.2 bidirectional General-purpose I/O port P2.2, also usable as ADC input AN10 and external interrupt INT10.
18 P2.1 bidirectional General-purpose I/O port P2.1, also usable as ADC input AN9, external interrupt INT9, and SDA (two-wire mode data I/O).
19 P0.6 bidirectional General-purpose I/O port P0.6, also usable as ADC input AN6 and external interrupt INT6.
20 P0.7 bidirectional General-purpose I/O port P0.7, also usable as ADC input AN7 and external interrupt INT7.

Key specifications

Parameter Value
Manufacturer Shenzhen Fuman
Package TSSOP-20
Category Single Chip Microcomputer/Microcontroller
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
直流供电电压 (DC supply voltage) VDD -0.3 6 V 6
工作环境温度 (operating ambient temperature) TOTG -40 85 °C 6
存储温度 (storage temperature) TSTG -55 125 °C 6
流过 VDD 的最大电流 (maximum current through VDD) 100 mA 5.0V, 25°C 6
流过 GND 的最大电流 (maximum current through GND) 150 mA 5.0V, 25°C 6
工作电压 (wide operating voltage, from features) VDD 2 5.5 V 宽电压 2.0V ~ 5.5V 2
温度范围 (operating temperature range, from features) -40 85 °C 温度范围-40°C ~ +85°C 2
工作电压 (operating voltage) VDD 2 5 5.5 V FCPU =16MHz 或 44KHz,ADC 模块关闭 6
输入漏电流 (input leakage current) IILC -1 0 1 μA I/O端口输入模式,VIN = VDD 或GND 8
输出漏电流 (output leakage current) IOLC -1 0 1 μA I/O端口输出模式,VOUT = VDD 或GND 8
BOR 设定电压 1 VBOR1 1.7 1.8 1.9 V BOR 使能,VDD=2V~5.5V 9
BOR 设定电压 2 VBOR2 1.9 2 2.1 V 9
BOR 设定电压 3 VBOR3 2.3 2.4 2.5 V 9
BOR 设定电压 4 VBOR4 2.5 2.6 2.7 V 9
BOR 设定电压 5 VBOR5 2.9 3 3.1 V 9
BOR 设定电压 6 VBOR6 3.5 3.6 3.7 V 9
BOR 设定电压 7 VBOR7 3.8 3.9 4 V 9
BOR 设定电压 8 VBOR8 4.1 4.2 4.3 V 9
LVD 设定电压 1 VLVD1 1.8 1.9 2 V 10
LVD 设定电压 2 VLVD2 1.9 2 2.1 V 10
LVD 设定电压 3 VLVD3 2.3 2.4 2.5 V 10
LVD 设定电压 4 VLVD4 2.5 2.6 2.7 V 10
LVD 设定电压 5 VLVD5 2.9 3 3.1 V 10
LVD 设定电压 6 VLVD6 3.5 3.6 3.7 V 10
LVD 设定电压 7 VLVD7 3.8 3.9 4 V 10
LVD 设定电压 8 VLVD8 4.1 4.2 4.3 V 10
内部 RC32M 启动时间 (internal RC32M start-up time) Tset1 5 μs 常温,VDD=5V 8
内部 RC44K 启动时间 (internal RC44K start-up time) Tset2 150 μs 常温,VDD=5V 8
外部高频振荡器工作电压 (external high-frequency oscillator operating voltage) Vset3 2.5 5.5 V 16MHz 8
内部高频 RC32M 频率精度 (frequency accuracy, 25°C) FIRC1 -1 1 % VDD=2V~5.5V, 25°C; nominal 32 MHz 8
内部高频 RC32M 频率精度 (frequency accuracy, -40°C~+85°C) FIRC2 -2 2 % VDD=5.0V,-40°C ~+85°C; nominal 32 MHz 8
内部 44KHz RC 频率 (internal 44KHz RC frequency) FWRC 31 44 58 KHz 8
供电电压 (ADC supply voltage) VAD 2.7 5 5.5 V 9
精度 (ADC resolution) NR 10 12 bit GND≤VAIN≤Vref 9
ADC 输入电阻 (ADC input resistance) RAIN 2 MΩ VAIN=5V 9
模拟电压源推荐阻抗 (recommended analog source impedance) ZAIN 10 kΩ 9
ADC 转换电流 (ADC conversion current) IAD 0.6 1 mA ADC 模块打开,VDD=5.0V 9
ADC 输入电流 (ADC input current) IADIN 10 μA VDD=5.0V 9
微分非线性误差 (differential nonlinearity error) DLE -2 2 LSB VDD=5.0V 9
积分非线性误差 (integral nonlinearity error, 1MHz conversion frequency) ILE -5 2 LSB 1MHz 转换频率; VDD=5.0V,Vref =2V 9
积分非线性误差 (integral nonlinearity error, 1MHz conversion frequency) ILE -4 2 LSB 1MHz 转换频率; VDD=5.0V,Vref =3V 9
积分非线性误差 (integral nonlinearity error, 1MHz conversion frequency) ILE -3 2 LSB 1MHz 转换频率; VDD=5.0V,Vref =4V 9
积分非线性误差 (integral nonlinearity error, 1MHz conversion frequency) ILE -2 2 LSB 1MHz 转换频率; VDD=5.0V,Vref =VDD 9
满刻度误差 (full-scale error) EF -5 5 LSB VDD=5.0V 9
偏移量误差 (offset error) EZ -3 3 LSB VDD=5.0V 9
总绝对误差 (total absolute error) EAD -5 5 LSB VDD=5.0V 9
总转换时间 (total conversion time) TCON 10 μs VDD=5.0V 9
ESD (HBM) 4000 V CLASS 3A 12
ESD (MM) 200 V CLASS 2 12
Latch-up 200 mA CLASSⅠ 12

CAD (KiCad official)

  • Symbol: XM004
  • Footprint: Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm
  • 3D model: TSSOP-20 (KiCad packages3D, STEP)
  • 3D model files: xm004-etched.step / xm004-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); xm004.step / xm004.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Shenzhen Fuman datasheet (15 pp, sha256 39afb7c52d79a4f3, retrieved 2026-10-29, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF