component
XL9010
Public Made by Adomby adom
XLSEMI DC-DC Converters, SOP-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 16d ago |
| viewers | 16d ago |
| package.json | 16d ago |
| page.json | 16d ago |
| README.md | 16d ago |
| xl9010-etched.glb | 16d ago |
| xl9010-etched.step | 16d ago |
| xl9010-hero.glb | 16d ago |
| xl9010-hero.overlay.json | 16d ago |
| xl9010.glb | 16d ago |
| xl9010.kicad_mod | 16d ago |
| xl9010.kicad_sym | 16d ago |
| xl9010.lbr | 16d ago |
| xl9010.step | 16d ago |
XL9010
XLSEMI · DC-DC Converters · SOP-8-EP
XL9010 from XLSEMI, in a SOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FB | input | Feedback input that senses the output voltage through an external resistor divider; the reference voltage is 1.25V. |
| 2 | EN | input | Enable pin that operates on a low level and shuts down on a high level; it is low when left floating. |
| 3 | VC | passive | Internal voltage regulator bypass pin; a 1uF capacitor must be connected between VIN and VC. |
| 4 | VIN | power_in | Power input supporting a wide 5V to 45V operating range; an electrolytic capacitor must be connected in parallel between VIN and GND to suppress noise. |
| 5 | SW | output | Power switch output pin and the switching node for the output power. |
| 6 | GND | power_in | Ground pin. |
| 7 | CSN | input | Negative input of the current-sense detection. |
| 8 | CSP | input | Positive input of the current-sense detection. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XLSEMI |
| Package | SOP-8-EP |
| Category | Power Management (PMIC) |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Feedback voltage | VFB | 1.225 | 1.25 | 1.275 | V | VIN=12V, VOUT=5.0V, IOUT=0.5A | 4 |
| Operating voltage | VIN | 5 | 45 | V | 4 | ||
| Shutdown current | IS | 35 | 100 | uA | VEN=2V | 4 | |
| Quiescent current | IQ | 2.5 | 5 | mA | VFB=2V | 4 | |
| Oscillation frequency | FOSC | 170 | 200 | 230 | KHz | 4 | |
| Switch current limit | IL | 3 | A | VFB=0V | 4 | ||
| EN pin threshold voltage, high level (shutdown) | VEN_H | 1.4 | V | 4 | |||
| EN pin threshold voltage, low level (enable) | VEN_L | 0.8 | V | 4 | |||
| High-side on-resistance | RDS(ON)H | 68 | mΩ | 4 | |||
| Low-side on-resistance | RDS(ON)L | 50 | mΩ | 4 | |||
| Thermal shutdown temperature | TSD | 160 | ℃ | 4 | |||
| Thermal shutdown hysteresis | TD | 30 | ℃ | 4 | |||
| Maximum duty cycle | DMAX | 100 | % | VFB=0V | 4 | ||
| Input voltage | VIN | -0.3 | 50 | V | 3 | ||
| EN pin voltage | VEN | -0.3 | 7 | V | 3 | ||
| Feedback pin voltage | VFB | -0.3 | 7 | V | 3 | ||
| Switch output pin voltage | VSW | -0.3 | V | 3 | |||
| Internal regulator bypass pin voltage | VC | -0.3 | V | 3 | |||
| Current sense positive pin voltage | VCSP | -0.3 | V | 3 | |||
| Current sense negative pin voltage | VCSN | -0.3 | V | 3 | |||
| Thermal resistance, junction to ambient (SOP8-EP) | RJA | 60 | oC/W | Junction to ambient, no external heatsink | 3 | ||
| Operating junction temperature | TJ | -40 | 150 | oC | 3 | ||
| Storage temperature range | TSTG | -65 | 150 | oC | 3 | ||
| Lead temperature (soldering) | TLEAD | 260 | oC | Soldering, 10 s | 3 | ||
| ESD HBM rating | ESD (HBM) | 6000 | V | HBM; datasheet prints '>6000' | 3 | ||
| Output voltage range | VOUT | 1.25 | 40 | V | 1 | ||
| Ambient operating temperature range | TA | -40 | 125 | ℃ | Temperature grade 1 | 1 |
CAD (KiCad official)
- Symbol:
XL9010 - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm - 3D model: SOP-8-EP (KiCad packages3D, STEP)
- 3D model files:
xl9010-etched.step/xl9010-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xl9010.step/xl9010.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XLSEMI datasheet (14 pp, sha256
9e803e98b8ab3a85, retrieved 2026-10-19, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).