main
Ray
Publish 0.1.0
e6e11f6
XL8574AT
XINLUDA · I/O Expanders · SOP-16-300mil
XL8574AT from XINLUDA, in a SOP-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | input | Hardware address input bit 0; connect directly to VCC or ground, pull-up resistors are not needed, and the pin must be tied to VCC or GND and not left floating. |
| 2 | A1 | input | Hardware address input bit 1; connect directly to VCC or ground, pull-up resistors are not needed, and the pin must be tied to VCC or GND and not left floating. |
| 3 | A2 | input | Hardware address input bit 2; connect directly to VCC or ground, pull-up resistors are not needed, and the pin must be tied to VCC or GND and not left floating. |
| 4 | P0 | bidirectional | Quasi-bidirectional port I/O bit 0; at power-on it is configured as an input with a weak 100μA internal pull-up to VCC, and it can sink up to 25mA (IOL, VOL = 1.0V) and source up to 1mA. |
| 5 | P1 | bidirectional | Quasi-bidirectional port I/O bit 1; at power-on it is configured as an input with a weak 100μA internal pull-up to VCC, and it can sink up to 25mA (IOL, VOL = 1.0V) and source up to 1mA. |
| 6 | P2 | bidirectional | Quasi-bidirectional port I/O bit 2; at power-on it is configured as an input with a weak 100μA internal pull-up to VCC, and it can sink up to 25mA (IOL, VOL = 1.0V) and source up to 1mA. |
| 7 | P3 | bidirectional | Quasi-bidirectional port I/O bit 3; at power-on it is configured as an input with a weak 100μA internal pull-up to VCC, and it can sink up to 25mA (IOL, VOL = 1.0V) and source up to 1mA. |
| 8 | GND | power_in | Supply ground (0 V reference). |
| 9 | P4 | bidirectional | Quasi-bidirectional port I/O bit 4; at power-on it is configured as an input with a weak 100μA internal pull-up to VCC, and it can sink up to 25mA (IOL, VOL = 1.0V) and source up to 1mA. |
| 10 | P5 | bidirectional | Quasi-bidirectional port I/O bit 5; at power-on it is configured as an input with a weak 100μA internal pull-up to VCC, and it can sink up to 25mA (IOL, VOL = 1.0V) and source up to 1mA. |
| 11 | P6 | bidirectional | Quasi-bidirectional port I/O bit 6; at power-on it is configured as an input with a weak 100μA internal pull-up to VCC, and it can sink up to 25mA (IOL, VOL = 1.0V) and source up to 1mA. |
| 12 | P7 | bidirectional | Quasi-bidirectional port I/O bit 7; at power-on it is configured as an input with a weak 100μA internal pull-up to VCC, and it can sink up to 25mA (IOL, VOL = 1.0V) and source up to 1mA. |
| 13 | INT | output | Active-LOW interrupt output with open-drain structure; it requires a pull-up resistor to VCC and goes LOW when any port input differs from its register state. |
| 14 | SCL | input | I2C serial clock line; connect to VCC through a pull-up resistor (standard mode, up to 100 kHz). |
| 15 | SDA | bidirectional | I2C serial data line; connect to VCC through a pull-up resistor. |
| 16 | VCC | power_in | Supply voltage; the datasheet recommended operating range is 2.3 V to 5.5 V (VCC(MAX) = 5.5 V), with absolute maximum 7 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XINLUDA |
| Package | SOP-16-300mil |
| Category | Interface ICs |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VCC | -0.5 | 7 | V | 4 | ||
| Input pin voltage range | VIN | -0.5 | V | 4 | |||
| Output pin voltage range | VO | -0.5 | V | 4 | |||
| Input clamp current | IIK | -20 | mA | VIN<0 | 4 | ||
| Output clamp current | IOK | -20 | mA | VO<0 | 4 | ||
| Input/output clamp current | IIOK | -400 | 400 | μA | VO<0 or VO>VCC | 4 | |
| Continuous output low current | IOL | 50 | mA | VO = 0 to VCC | 4 | ||
| Continuous output high current | IOH | -4 | mA | VO = 0 to VCC | 4 | ||
| Continuous current through GND | ICC | -100 | mA | 4 | |||
| Continuous current through VCC | ICC | 100 | mA | 4 | |||
| Total Power Dissipation | Ptot | 400 | mW | 4 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 4 | ||
| Ambient temperature range | Tamb | -40 | 85 | °C | Operating | 4 | |
| Supply voltage | VCC | 2.3 | 5.5 | V | VCC(MAX) = 5.5V | 4 | |
| LOW-level input voltage, SCL, SDA | VIL | -0.5 | V | 5 | |||
| LOW-level input voltage, A2-A0, P7-P0 | VIL | -0.5 | V | 5 | |||
| High-level output current, P7-P0 | IOH | -1 | mA | 5 | |||
| Low-level output current, P7-P0 | IOL | 25 | mA | 5 | |||
| Operating free-air temperature | TA | -40 | 85 | °C | 5 | ||
| Supply current, in operating mode | ICC | 40 | 100 | μA | I/O = inputs, VIN = VCC or GND, fSCL = 100 kHz, IO = 0, No load; VCC = +5.5V | 5 | |
| Standby current, in standby mode | ISTB | 2.5 | 10 | μA | I/O = inputs, VIN = VCC or GND, fSCL = 0 kHz, IO = 0, No load; VCC = +5.5V | 5 | |
| Power-on reset voltage, VCC rising | VPOR | 1.3 | 2.4 | V | VIN = VCC or GND, IO = 0, No load; VCC = +5.5V | 5 | |
| LOW-level input voltage, SCL/SDA | VIL | -0.5 | V | VCC = 2.3V to 5.5V | 5 | ||
| LOW-level output current, SDA | IOL | 3 | mA | VOL = 0.4 V; VCC = 2.3V to 5.5V | 5 | ||
| Leakage current, SCL/SDA | IL | -1 | 1 | μA | VIN = VCC or GND; VCC = 2.3V to 5.5V | 5 | |
| Input capacitance, SCL/SDA | CI | 3 | 7 | pF | VIN = GND; VCC = 2.3V to 5.5V | 5 | |
| LOW-level input voltage, P0-P7 | VIL | -0.5 | V | VCC = 2.3V to 5.5V | 5 | ||
| LOW-level output current, P0-P7 | IOL | 10 | 25 | mA | VOL = 1.0V; VCC = +5.5V | 5 | |
| HIGH-level output current, P0-P7 | IOH | 30 | 300 | μA | VOH = GND; VCC = +5.5V | 5 | |
| HIGH-level input leakage current, P0-P7 | ILIH | 5 | μA | VIN = VCC | 5 | ||
| LOW-level input leakage current, P0-P7 | ILIL | -5 | μA | VIN = GND | 5 | ||
| Input capacitance, P0-P7 | CI | 4 | 10 | pF | VCC = 2.3V to 5.5V | 5 | |
| Output capacitance, P0-P7 | CO | 4 | 10 | pF | VCC = 2.3V to 5.5V | 5 | |
| LOW-level output current, INT | IOL | 1.6 | mA | VOL = 0.4V; VCC = 2.3V to 5.5V | 5 | ||
| HIGH-level input leakage current, INT | ILIH | 5 | μA | VIN = VCC | 5 | ||
| LOW-level input leakage current, INT | ILIL | -5 | μA | VIN = GND | 5 | ||
| LOW-level input voltage, A0-A2 | VIL | -0.5 | V | VCC = 2.3V to 5.5V | 5 | ||
| HIGH-level input leakage current, A0-A2 | ILIH | 5 | μA | VIN = VCC | 5 | ||
| LOW-level input leakage current, A0-A2 | ILIL | -5 | μA | VIN = GND | 5 | ||
| SCL clock frequency | fSCL | 0 | 100 | kHz | 6 | ||
| Bus free time between STOP and START | tBUF | 4.7 | μs | 6 | |||
| Hold time (repeated) START condition | tHD:STA | 4 | μs | 6 | |||
| Set-up time for repeated START condition | tSU:STA | 4.7 | μs | 6 | |||
| Set-up time for STOP condition | tSU:STO | 4 | μs | 6 | |||
| Data valid acknowledge time | tVD:ACK | 0 | 3.4 | μs | 6 | ||
| Data hold time | tHD:DAT | 0 | ns | 6 | |||
| Data valid time | tVD:DAT | 0 | 3.4 | μs | 6 | ||
| Data set-up time | tSU:DAT | 250 | ns | 6 | |||
| LOW period of the SCL clock | tLOW | 4.7 | μs | 6 | |||
| HIGH period of the SCL clock | tHIGH | 4 | μs | 6 | |||
| Fall time of both SDA and SCL | tf | 0.3 | μs | 6 | |||
| Rise time of both SDA and SCL | tr | 1 | μs | 6 | |||
| Pulse width of spikes suppressed by input filter | tsp | 50 | ns | 6 | |||
| I2C-bus capacitive load | Cb | 400 | pF | 6 | |||
| Output data valid time | tpv(Q) | 4 | μs | CL ≤ 100pF | 6 | ||
| Input data set-up time | tps(D) | 0 | μs | CL ≤ 100pF | 6 | ||
| Input data hold time | tph(D) | 4 | μs | CL ≤ 100pF | 6 | ||
| Interrupt valid time, port to INT | tiv(INT_N) | 4 | μs | CL ≤ 100pF | 6 | ||
| Interrupt reset delay time, SCL to INT | tirst(INT_N) | 4 | μs | CL ≤ 100pF | 6 | ||
| Package thermal resistance, junction-to-ambient (SOP16W) | RθJA | 79.7 | °C/W | Free air; minimum pad spacing on FR4 PCB, 10 mm by 1 inch 2 oz copper trace, no air flow | 4 |
CAD (KiCad official)
- Symbol:
XL8574AT - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOP-16-300mil (KiCad packages3D, STEP)
- 3D model files:
xl8574at-etched.step/xl8574at-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xl8574at.step/xl8574at.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XINLUDA datasheet (22 pp, sha256
1bbac403ea0d1a5f, retrieved 2026-11-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# XL8574AT
**XINLUDA** · I/O Expanders · SOP-16-300mil
XL8574AT from XINLUDA, in a SOP-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | input | Hardware address input bit 0; connect directly to VCC or ground, pull-up resistors are not needed, and the pin must be tied to VCC or GND and not left floating. |
| 2 | A1 | input | Hardware address input bit 1; connect directly to VCC or ground, pull-up resistors are not needed, and the pin must be tied to VCC or GND and not left floating. |
| 3 | A2 | input | Hardware address input bit 2; connect directly to VCC or ground, pull-up resistors are not needed, and the pin must be tied to VCC or GND and not left floating. |
| 4 | P0 | bidirectional | Quasi-bidirectional port I/O bit 0; at power-on it is configured as an input with a weak 100μA internal pull-up to VCC, and it can sink up to 25mA (IOL, VOL = 1.0V) and source up to 1mA. |
| 5 | P1 | bidirectional | Quasi-bidirectional port I/O bit 1; at power-on it is configured as an input with a weak 100μA internal pull-up to VCC, and it can sink up to 25mA (IOL, VOL = 1.0V) and source up to 1mA. |
| 6 | P2 | bidirectional | Quasi-bidirectional port I/O bit 2; at power-on it is configured as an input with a weak 100μA internal pull-up to VCC, and it can sink up to 25mA (IOL, VOL = 1.0V) and source up to 1mA. |
| 7 | P3 | bidirectional | Quasi-bidirectional port I/O bit 3; at power-on it is configured as an input with a weak 100μA internal pull-up to VCC, and it can sink up to 25mA (IOL, VOL = 1.0V) and source up to 1mA. |
| 8 | GND | power_in | Supply ground (0 V reference). |
| 9 | P4 | bidirectional | Quasi-bidirectional port I/O bit 4; at power-on it is configured as an input with a weak 100μA internal pull-up to VCC, and it can sink up to 25mA (IOL, VOL = 1.0V) and source up to 1mA. |
| 10 | P5 | bidirectional | Quasi-bidirectional port I/O bit 5; at power-on it is configured as an input with a weak 100μA internal pull-up to VCC, and it can sink up to 25mA (IOL, VOL = 1.0V) and source up to 1mA. |
| 11 | P6 | bidirectional | Quasi-bidirectional port I/O bit 6; at power-on it is configured as an input with a weak 100μA internal pull-up to VCC, and it can sink up to 25mA (IOL, VOL = 1.0V) and source up to 1mA. |
| 12 | P7 | bidirectional | Quasi-bidirectional port I/O bit 7; at power-on it is configured as an input with a weak 100μA internal pull-up to VCC, and it can sink up to 25mA (IOL, VOL = 1.0V) and source up to 1mA. |
| 13 | INT | output | Active-LOW interrupt output with open-drain structure; it requires a pull-up resistor to VCC and goes LOW when any port input differs from its register state. |
| 14 | SCL | input | I2C serial clock line; connect to VCC through a pull-up resistor (standard mode, up to 100 kHz). |
| 15 | SDA | bidirectional | I2C serial data line; connect to VCC through a pull-up resistor. |
| 16 | VCC | power_in | Supply voltage; the datasheet recommended operating range is 2.3 V to 5.5 V (VCC(MAX) = 5.5 V), with absolute maximum 7 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XINLUDA |
| Package | SOP-16-300mil |
| Category | Interface ICs |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VCC | -0.5 | | 7 | V | | 4 |
| Input pin voltage range | VIN | -0.5 | | | V | | 4 |
| Output pin voltage range | VO | -0.5 | | | V | | 4 |
| Input clamp current | IIK | | | -20 | mA | VIN<0 | 4 |
| Output clamp current | IOK | | | -20 | mA | VO<0 | 4 |
| Input/output clamp current | IIOK | -400 | | 400 | μA | VO<0 or VO>VCC | 4 |
| Continuous output low current | IOL | | | 50 | mA | VO = 0 to VCC | 4 |
| Continuous output high current | IOH | | | -4 | mA | VO = 0 to VCC | 4 |
| Continuous current through GND | ICC | | | -100 | mA | | 4 |
| Continuous current through VCC | ICC | | | 100 | mA | | 4 |
| Total Power Dissipation | Ptot | | | 400 | mW | | 4 |
| Storage temperature range | Tstg | -65 | | 150 | °C | | 4 |
| Ambient temperature range | Tamb | -40 | | 85 | °C | Operating | 4 |
| Supply voltage | VCC | 2.3 | | 5.5 | V | VCC(MAX) = 5.5V | 4 |
| LOW-level input voltage, SCL, SDA | VIL | -0.5 | | | V | | 5 |
| LOW-level input voltage, A2-A0, P7-P0 | VIL | -0.5 | | | V | | 5 |
| High-level output current, P7-P0 | IOH | | | -1 | mA | | 5 |
| Low-level output current, P7-P0 | IOL | | | 25 | mA | | 5 |
| Operating free-air temperature | TA | -40 | | 85 | °C | | 5 |
| Supply current, in operating mode | ICC | | 40 | 100 | μA | I/O = inputs, VIN = VCC or GND, fSCL = 100 kHz, IO = 0, No load; VCC = +5.5V | 5 |
| Standby current, in standby mode | ISTB | | 2.5 | 10 | μA | I/O = inputs, VIN = VCC or GND, fSCL = 0 kHz, IO = 0, No load; VCC = +5.5V | 5 |
| Power-on reset voltage, VCC rising | VPOR | | 1.3 | 2.4 | V | VIN = VCC or GND, IO = 0, No load; VCC = +5.5V | 5 |
| LOW-level input voltage, SCL/SDA | VIL | -0.5 | | | V | VCC = 2.3V to 5.5V | 5 |
| LOW-level output current, SDA | IOL | 3 | | | mA | VOL = 0.4 V; VCC = 2.3V to 5.5V | 5 |
| Leakage current, SCL/SDA | IL | -1 | | 1 | μA | VIN = VCC or GND; VCC = 2.3V to 5.5V | 5 |
| Input capacitance, SCL/SDA | CI | | 3 | 7 | pF | VIN = GND; VCC = 2.3V to 5.5V | 5 |
| LOW-level input voltage, P0-P7 | VIL | -0.5 | | | V | VCC = 2.3V to 5.5V | 5 |
| LOW-level output current, P0-P7 | IOL | 10 | 25 | | mA | VOL = 1.0V; VCC = +5.5V | 5 |
| HIGH-level output current, P0-P7 | IOH | 30 | | 300 | μA | VOH = GND; VCC = +5.5V | 5 |
| HIGH-level input leakage current, P0-P7 | ILIH | | | 5 | μA | VIN = VCC | 5 |
| LOW-level input leakage current, P0-P7 | ILIL | | | -5 | μA | VIN = GND | 5 |
| Input capacitance, P0-P7 | CI | | 4 | 10 | pF | VCC = 2.3V to 5.5V | 5 |
| Output capacitance, P0-P7 | CO | | 4 | 10 | pF | VCC = 2.3V to 5.5V | 5 |
| LOW-level output current, INT | IOL | 1.6 | | | mA | VOL = 0.4V; VCC = 2.3V to 5.5V | 5 |
| HIGH-level input leakage current, INT | ILIH | | | 5 | μA | VIN = VCC | 5 |
| LOW-level input leakage current, INT | ILIL | | | -5 | μA | VIN = GND | 5 |
| LOW-level input voltage, A0-A2 | VIL | -0.5 | | | V | VCC = 2.3V to 5.5V | 5 |
| HIGH-level input leakage current, A0-A2 | ILIH | | | 5 | μA | VIN = VCC | 5 |
| LOW-level input leakage current, A0-A2 | ILIL | | | -5 | μA | VIN = GND | 5 |
| SCL clock frequency | fSCL | 0 | | 100 | kHz | | 6 |
| Bus free time between STOP and START | tBUF | 4.7 | | | μs | | 6 |
| Hold time (repeated) START condition | tHD:STA | 4 | | | μs | | 6 |
| Set-up time for repeated START condition | tSU:STA | 4.7 | | | μs | | 6 |
| Set-up time for STOP condition | tSU:STO | 4 | | | μs | | 6 |
| Data valid acknowledge time | tVD:ACK | 0 | | 3.4 | μs | | 6 |
| Data hold time | tHD:DAT | 0 | | | ns | | 6 |
| Data valid time | tVD:DAT | 0 | | 3.4 | μs | | 6 |
| Data set-up time | tSU:DAT | 250 | | | ns | | 6 |
| LOW period of the SCL clock | tLOW | 4.7 | | | μs | | 6 |
| HIGH period of the SCL clock | tHIGH | 4 | | | μs | | 6 |
| Fall time of both SDA and SCL | tf | | | 0.3 | μs | | 6 |
| Rise time of both SDA and SCL | tr | | | 1 | μs | | 6 |
| Pulse width of spikes suppressed by input filter | tsp | | | 50 | ns | | 6 |
| I2C-bus capacitive load | Cb | | | 400 | pF | | 6 |
| Output data valid time | tpv(Q) | | | 4 | μs | CL ≤ 100pF | 6 |
| Input data set-up time | tps(D) | 0 | | | μs | CL ≤ 100pF | 6 |
| Input data hold time | tph(D) | 4 | | | μs | CL ≤ 100pF | 6 |
| Interrupt valid time, port to INT | tiv(INT_N) | | | 4 | μs | CL ≤ 100pF | 6 |
| Interrupt reset delay time, SCL to INT | tirst(INT_N) | | | 4 | μs | CL ≤ 100pF | 6 |
| Package thermal resistance, junction-to-ambient (SOP16W) | RθJA | | 79.7 | | °C/W | Free air; minimum pad spacing on FR4 PCB, 10 mm by 1 inch 2 oz copper trace, no air flow | 4 |
## CAD (KiCad official)
- Symbol: `XL8574AT`
- Footprint: `Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm`
- 3D model: SOP-16-300mil (KiCad packages3D, STEP)
- 3D model files: `xl8574at-etched.step` / `xl8574at-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `xl8574at.step` / `xl8574at.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [XINLUDA datasheet](docs/xl8574at-datasheet.pdf) (22 pp, sha256 `1bbac403ea0d1a5f`, retrieved 2026-11-13, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/xl8574at-datasheet.pdf)