main
History Download
Ray Publish 0.1.0 95b3475

XL82C251

XINLUDA · CAN Transceivers · SOP-8

XL82C251 from XINLUDA, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 TXD input Transmit data input: a LOW level drives the bus dominant, while HIGH or floating leaves the bus recessive (Table 4-1/4-2).
2 GND power_in Ground reference; all device voltages are referenced to this pin.
3 VCC power_in Supply voltage, 4.5 V to 5.5 V recommended operating range (absolute maximum 7.0 V).
4 RXD output Receive data output: driven LOW when a dominant bus state is detected and HIGH for recessive, with VOH of at least 0.8VCC at -100 µA.
5 Vref power_out Reference voltage output, 0.45VCC to 0.55VCC at V8 = 1 V with I5 below 50 µA.
6 CANL bidirectional LOW-level CAN bus line input/output; DC voltage limit -32 V to +32 V (with 0 V < VCC < 5.5 V and TXD HIGH or floating) and transients up to ±180 V.
7 CANH bidirectional HIGH-level CAN bus line input/output; DC voltage limit -32 V to +32 V (with 0 V < VCC < 5.5 V and TXD HIGH or floating) and transients up to ±180 V.
8 Rs input Mode select pin: connect to ground for high-speed mode, a resistor to ground sets slope control (Islope -10 µA to -200 µA), and a HIGH level above 0.75VCC selects low-current Standby.

Key specifications

Parameter Value
Manufacturer XINLUDA
Package SOP-8
Category Interface
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC -0.3 7 V 5
DC voltage at pins 1, 4, 5 and 8 Vn -0.3 V 5
DC voltage at pins 6 and 7 V6,7 -32 32 V 0 V < VCC < 5.5 V; TXD HIGH or floating 5
Transient voltage at pins 6 and 7 Vtrt -180 180 V see Figure 6-6 5
Storage temperature Tstg -50 150 ℃ 5
Ambient temperature Tamb -40 85 ℃ 5
Virtual junction temperature Tvj -40 150 ℃ 5
Electrostatic discharge voltage (human body model) VESD -2000 2000 V human body model; C = 100 pF; R = 1500 Ω 5
Electrostatic discharge voltage (machine model) VESD -150 150 V machine model; C = 200 pF; R = 25 Ω 5
Supply voltage VCC 4.5 5.5 V 5
Supply current ICC 220 μA Standby mode 5
Maximum transmission speed 1/tbit 1 MBd non-return-to-zero 5
CANH, CANL input/output voltage VCAN -24 24 V 5
Differential bus voltage Vdiff 1.5 3 V 5
Propagation delay tPD 60 ns High-speed mode 5
Ambient temperature (recommended) Tamb -40 85 ℃ 5
Supply current, dominant I3 80 mA Dominant; V1 = 1 V; Vcc=5.1V 6
Supply current, dominant I3 85 mA Dominant; V1 = 1 V; Vcc=5.25V 6
Supply current, dominant I3 90 mA Dominant; V1 = 1 V; Vcc=5.5V 6
Supply current, recessive I3 12 mA Recessive; V1 = 4 V; R8 = 47 kΩ 6
Supply current, standby I3 170 220 μA Standby; Tamb < 80 C 6
LOW-level input voltage VIL -0.3 V output dominant 6
HIGH-level input current IIH -220 40 μA V1 = 4 V 6
LOW-level input current IIL -110 -650 μA V1 = 1 V 6
Recessive bus voltage V6,7 2 3 V V1 = 4 V; no load 6
Off-state output leakage current ILO -2 3 mA 2 V < (V6, V7 ) < 7 V 6
Off-state output leakage current ILO -5 12 mA 5 V < (V6, V7) < 18V 6
CANH output voltage V7 2.75 4.5 V V1 = 1 V 6
CANL output voltage V6 0.5 2.25 V V1 = 1 V 6
Difference between output voltage at pins 6 and 7 ΔV6,7 1.5 3 V V1 = 1 V 6
Difference between output voltage at pins 6 and 7 (RL = 45 Ω) ΔV6,7 1.5 V V1 = 1 V; RL = 45Ω; VCC ≥ 4.5V 6
Difference between output voltage at pins 6 and 7 (no load) ΔV6,7 -500 50 mV V1 = 4 V; no load 6
Short-circuit CANH current Isc7 -220 mA V7 = -5V 6
Short-circuit CANL current Isc6 220 mA V6 = 32 V 6
Differential input voltage (recessive) Vdiff(r) -1 0.5 V 6
Differential input voltage (recessive), non-Standby mode Vdiff(r) -1 0.4 V 7 V < (V6, V7) <12 V, non-Standy mode 6
Differential input voltage (dominant) Vdiff(d) 0.9 5 V 6
Differential input voltage (dominant), non-Standby mode Vdiff(d) 1 5 V 7 V < (V6, V7) <12 V, non-Standy mode 6
LOW-level output voltage pin 4 VOL 0 V I4 = 1 mA 6
LOW-level output voltage pin 4 VOL 0 1.5 V I4 = 10 mA 6
Input resistance CANH, CANL Ri 4.7 30 kΩ 6
Differential input resistance Rdiff 19.2 120 kΩ 6
Input capacitance CANH, CANL Ci 20 pF 6
Differential input capacitance Cdiff 10 pF 6
Minimum bit time tbit 1 μs Rs = 0 Ω 6
TXD delay TXD to bus active tonTXD 60 ns Rs = 0 Ω 6
TXD delay TXD to bus inactive toffTXD 45 90 ns Rs = 0 Ω 7
TXD delay TXD to receiver active tonRXD 65 130 ns Rs = 0 Ω 7
TXD delay TXD to receiver inactive toffRXD 90 200 ns Rs=0 Ω; VCC= 4.5v to 5.1V 7
TXD delay TXD to receiver inactive toffRXD 100 200 ns Rs = 0 Ω 7
TXD delay TXD to receiver inactive toffRXD 300 450 ns Rs = 47 kΩ 7
TXD delay TXD to receiver active tonRXD 450 580 ns Rs = 47 kΩ 7
TXD delay TXD to receiver active tonRXD 280 350 ns Rs = 24 kΩ 7
TXD delay TXD to receiver inactive toffRXD 280 500 ns Rs = 47 kΩ 7
TXD delay TXD to receiver inactive toffRXD 230 350 ns Rs = 24 kΩ 7
Wake-up time from Standby via pin 8 tWAKE 25 μs 7
Bus dominant to RXD LOW tdRXDL 8 μs V8 = 4 V; Standby mode 7
Input current for high-speed (pin 8) I8 -500 μA V8 = 0V 7
Slope control mode current Islope -10 -200 μA 7
Junction to ambient thermal resistance Rth(j-a) 165 K/W in free air 5

CAD (KiCad official)

  • Symbol: XL82C251
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: xl82c251-etched.step / xl82c251-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); xl82c251.step / xl82c251.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: XINLUDA datasheet (11 pp, sha256 561457e9f9a6f6bb, retrieved 2026-10-17, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF