main
History Download
Ray Publish 0.1.0 94ccc7d

XL7705B

XINLUDA · Analog To Digital Converters (ADCs) · SOP-16-300mil

XL7705B from XINLUDA, in a SOP-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SCLK input Read/write serial clock input for the three-wire interface, specified as a Schmitt-trigger input.
2 XI input Clock input for a crystal or external clock, with a master clock range of 400 to 2500 kHz and input levels of 0.8 V low / 3.5 V high at VDD=5 V (0.4 V / 2.5 V at VDD=3 V).
3 XO output Clock output of the crystal oscillator; the application circuit uses crystal load capacitors C1 and C2 generally in the range of 30 pF to 50 pF.
4 CSN input Active-low chip select; registers can only be read or written while CSN is pulled low, and CSN should be pulled high after the access.
5 RESET input Active-low reset that resets all logic, digital filters and modulators and returns on-chip registers to default, with a minimum pulse width of 100 ns.
6 AIN2P input Differential analogue positive input for channel 2; the absolute/common-mode range is -0.03 V to VDD+0.03 V with BUFEN=0, or 0.05 V to VDD-1.5 V with BUFEN=1.
7 AIN1P input Differential analogue positive input for channel 1; the absolute/common-mode range is -0.03 V to VDD+0.03 V with BUFEN=0, or 0.05 V to VDD-1.5 V with BUFEN=1.
8 AIN1N input Differential analogue negative input for channel 1; the absolute/common-mode range is -0.03 V to VDD+0.03 V with BUFEN=0, or 0.05 V to VDD-1.5 V with BUFEN=1.
9 REFINP input Positive reference voltage input, which must be greater than REFINN; the reference is 2.5 V at 5 V supply or 1.225 V at 3 V supply, and the reference absolute/common-mode range is 0 to VDD.
10 REFINN input Negative reference voltage input, which must be less than REFINP; the reference is 2.5 V at 5 V supply or 1.225 V at 3 V supply, and the reference absolute/common-mode range is 0 to VDD.
11 AIN2N input Differential analogue negative input for channel 2; the absolute/common-mode range is -0.03 V to VDD+0.03 V with BUFEN=0, or 0.05 V to VDD-1.5 V with BUFEN=1.
12 OKL output Conversion-complete flag: low means the ADC result register is updated and can be read, while high means conversion or update is in progress and data cannot be read.
13 DOUT output Serial data output that shifts data out on the falling edge of SCLK, most significant bit first.
14 DIN input Serial data input that is written on the rising edge of SCLK, most significant bit first.
15 VDD power_in Power supply for 3 V or 5 V operation (±5%); the absolute maximum logic supply voltage is 7 V with a -0.3 V lower limit.
16 GND power_in Ground pin, the device ground reference.

Key specifications

Parameter Value
Manufacturer XINLUDA
Package SOP-16-300mil
Category Data Converters
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Logic Supply Voltage VDD -0.3 7 V 3
Analogue input voltage Vin -0.3 V 3
Digital output voltage Vout -0.3 V 3
Operating Temperature Range Topr -40 85 ℃ 3
Storage temperature range Tstg -45 125 ℃ 3
Junction temperature Tj 125 ℃ 3
Electrostatic discharge (ESD) Human-body model (HBM) 2000 V Human-body model (HBM) 3
Operating voltage tolerance VDD -5 5 % 3V or 5V operating voltage 1
Maximum power consumption 1 mW At 3V 1
Integral nonlinearity 0 0.01 %of FSR 3
Bipolar negative full scale error 0 0.01 %of FSR/℃ 3
REF IN Absolute/Common Mode Voltage 0 V 3
AIN Absolute/Common Mode Voltage -0.03 V BUFEN=0 3
AIN Absolute/Common Mode Voltage 0.05 V BUFEN=1 3
AIN Differential voltage 0 V Unipolar input 3
REFINP, REFINN Difference 1 1.75 V VDD=3V,Vref=1.225V 3
REFINP, REFINN Difference 1 3.5 V VDD=5V,Vref=2.5V 3
VIL VIL 0.8 V VDD=5V 4
VIL VIL 0.4 V VDD=3V 4
VIH VIH 2 V 4
Schmitt trigger input (SCLK) VT+ VT+ 1.4 3 V VDD=5V 4
Schmitt trigger input (SCLK) VT_ VT_ 0.8 1.4 V VDD=5V 4
Schmitt trigger input (SCLK) VT+, VT_ VT+, VT_ 0.4 0.8 V VDD=5V 4
Schmitt trigger input (SCLK) VT+ VT+ 1 2.5 V VDD=3V 4
Schmitt trigger input (SCLK) VT_ VT_ 0.4 1.1 V VDD=3V 4
Schmitt trigger input (SCLK) VT+, VT_ VT+, VT_ 0.375 0.8 V VDD=3V 4
XI Input Low Level 0.8 V VDD=5V 4
XI Input High Level 3.5 V VDD=5V 4
XI Input Low Level 0.4 V VDD=3V 4
XI Input High Level 2.5 V VDD=3V 4
Power-down mode current 16 uA VDD=5V, XI=0V / VDD 4
Power-down mode current 8 uA VDD=3V, XI=0V / VDD 4
Master Clock Frequency fCLKIN 400 2500 kHz 5
Slck↓→DIN Effective acquisition interval tdo 0 80 ns VDD=5V 5
Slck↓→DIN Effective acquisition interval tdo 0 100 ns VDD=3V 5
SCLK↑ Post-bus withdrawal time tsout 10 60 ns VDD=5V 5
AIN Input Current 1 nA 3
AIN Acquisition Capacitance 10 pF 3
Resolution 16 Bits Guaranteed filter trap <60hz 3
Supply Current 0.32 mA 3V supply; BUFEN=0; fCLKIN=1 MHz; Gain 1-128; XI and OSCDIS=1 4
Supply Current 0.6 mA 3V supply; BUFEN=1; fCLKIN=1 MHz; Gain 1-128; XI and OSCDIS=1 4
Supply Current 0.4 mA 3V supply; BUFEN=0; fCLKIN=2.4576 MHz; Gain 1-4; XI and OSCDIS=1 4
Supply Current 0.7 mA 3V supply; BUFEN=1; fCLKIN=2.4576 MHz; Gain 1-4; XI and OSCDIS=1 4
Supply Current 1.1 mA 3V supply; BUFEN=1; fCLKIN=2.4576 MHz; Gain 8-128; XI and OSCDIS=1 4
Supply Current 0.45 mA 5V supply; BUFEN=0; fCLKIN=1 MHz; Gain 1-128; XI and OSCDIS=1 4
Supply Current 0.85 mA 5V supply; BUFEN=0; fCLKIN=2.4576 MHz; Gain 8-128; XI and OSCDIS=1 4
Supply Current 0.9 mA 5V supply; BUFEN=1; fCLKIN=2.4576 MHz; Gain 1-4; XI and OSCDIS=1 4
Supply Current 1.3 mA 5V supply; BUFEN=1; fCLKIN=2.4576 MHz; Gain 8-128; XI and OSCDIS=1 4
RESET Pulse width tR 100 ns 5
CSN↓→SCLK First rising edge Tcsn1 120 ns 5
DIN→SCLK↑ Acquisition time tds 30 ns 5
DIN→SCLK↑ Holding time tdh 20 ns 5
Clock Pulse width high (low) level tspw 100 ns 5
SCLK↑ Post-bus withdrawal time tsout 100 ns VDD=3V 5

CAD (KiCad official)

  • Symbol: XL7705B
  • Footprint: Package_SO:SOIC-16W_7.5x12.8mm_P1.27mm
  • 3D model: SOP-16-300mil (KiCad packages3D, STEP)
  • 3D model files: xl7705b-etched.step / xl7705b-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); xl7705b.step / xl7705b.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: XINLUDA datasheet (12 pp, sha256 91725263468fc1bc, retrieved 2026-11-13, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF