← Commit history
xl7555: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+90−10
package.json+48−8@@ -71,19 +71,19 @@ "number": "2", "name": "TRIGGER", "type": "input",- "description": "Active-low trigger input; sets output HIGH when voltage falls below 1/3 VDD; input current \u226410nA typ, 50nA max at VDD=15V."+ "description": "Active-low trigger input; sets output HIGH when voltage falls below 1/3 VDD; input current ≤10nA typ, 50nA max at VDD=15V." }, { "number": "3", "name": "OUTPUT", "type": "output",- "description": "CMOS push-pull output swinging rail-to-rail; VOL \u22641.0V at ISINK=20mA (VDD=15V), VOH \u226514.3V at ISOURCE=0.8mA (VDD=15V); absolute maximum output current 100mA."+ "description": "CMOS push-pull output swinging rail-to-rail; VOL ≤1.0V at ISINK=20mA (VDD=15V), VOH ≥14.3V at ISOURCE=0.8mA (VDD=15V); absolute maximum output current 100mA." }, { "number": "4", "name": "RESET", "type": "input",- "description": "Active-low reset input; forces output and discharge switch low when pulled below 0.4-1.0V (VDD=2V-15V); input current \u226410nA typ, 50nA max at VDD=15V."+ "description": "Active-low reset input; forces output and discharge switch low when pulled below 0.4-1.0V (VDD=2V-15V); input current ≤10nA typ, 50nA max at VDD=15V." }, { "number": "5",@@ -95,19 +95,19 @@ "number": "6", "name": "THRESHOLD", "type": "input",- "description": "Upper comparator input; resets output LOW and turns on discharge switch when voltage exceeds 2/3 VDD; input current \u226410nA typ, 50nA max at VDD=15V."+ "description": "Upper comparator input; resets output LOW and turns on discharge switch when voltage exceeds 2/3 VDD; input current ≤10nA typ, 50nA max at VDD=15V." }, { "number": "7", "name": "DISCHARGE", "type": "output",- "description": "Open-drain switch to GND for discharging external timing capacitor; leakage \u226410nA typ, 50nA max (VDD=15V); VDIS \u22640.4V at ISINK=15mA (VDD=15V)."+ "description": "Open-drain switch to GND for discharging external timing capacitor; leakage ≤10nA typ, 50nA max (VDD=15V); VDIS ≤0.4V at ISINK=15mA (VDD=15V)." }, { "number": "8", "name": "VDD", "type": "power_in",- "description": "Positive supply voltage; operating range 2V to 18V; quiescent current 60\u00b5A typ (300\u00b5A max) at VDD=15V."+ "description": "Positive supply voltage; operating range 2V to 18V; quiescent current 60µA typ (300µA max) at VDD=15V." } ], "provenance": {@@ -129,6 +129,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "xl7555.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 4.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "xl7555-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 4.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "d4c4b33da905955996512dbce849a99e0b23527d440830aaa5642c27edb39b56",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -114,7 +114,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "xl7555.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 4.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "xl7555-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 4.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "d4c4b33da905955996512dbce849a99e0b23527d440830aaa5642c27edb39b56",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -161,4 +201,4 @@ "visibility": { "public": true }-}+}