main
History Download
Ray Publish 0.1.0 c88280a

XL62783

XINLUDA · VFD Drivers · SOP-18-300mil

XL62783 from XINLUDA, in a SOP-18-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 I1 input Input pin for output channel 1; the datasheet specifies VIN(ON) of 2.0 V minimum to turn the output on and VIN(OFF) of 0.6 V maximum to turn it off, with an absolute maximum input voltage of −0.5 to 30 V.
2 I2 input Input pin for output channel 2; the datasheet specifies VIN(ON) of 2.0 V minimum to turn the output on and VIN(OFF) of 0.6 V maximum to turn it off, with an absolute maximum input voltage of −0.5 to 30 V.
3 I3 input Input pin for output channel 3; the datasheet specifies VIN(ON) of 2.0 V minimum to turn the output on and VIN(OFF) of 0.6 V maximum to turn it off, with an absolute maximum input voltage of −0.5 to 30 V.
4 I4 input Input pin for output channel 4; the datasheet specifies VIN(ON) of 2.0 V minimum to turn the output on and VIN(OFF) of 0.6 V maximum to turn it off, with an absolute maximum input voltage of −0.5 to 30 V.
5 I5 input Input pin for output channel 5; the datasheet specifies VIN(ON) of 2.0 V minimum to turn the output on and VIN(OFF) of 0.6 V maximum to turn it off, with an absolute maximum input voltage of −0.5 to 30 V.
6 I6 input Input pin for output channel 6; the datasheet specifies VIN(ON) of 2.0 V minimum to turn the output on and VIN(OFF) of 0.6 V maximum to turn it off, with an absolute maximum input voltage of −0.5 to 30 V.
7 I7 input Input pin for output channel 7; the datasheet specifies VIN(ON) of 2.0 V minimum to turn the output on and VIN(OFF) of 0.6 V maximum to turn it off, with an absolute maximum input voltage of −0.5 to 30 V.
8 I8 input Input pin for output channel 8; the datasheet specifies VIN(ON) of 2.0 V minimum to turn the output on and VIN(OFF) of 0.6 V maximum to turn it off, with an absolute maximum input voltage of −0.5 to 30 V.
9 VCC power_in Power supply pin; the datasheet gives an operating range of 2.0 V to 50 V and an absolute maximum of −0.5 to 50 V.
10 GND power_in Ground pin for the device.
11 O8 output Source-driver output for channel 8 with a built-in clamp diode for inductive loads; IOUT is rated −500 mA maximum per channel.
12 O7 output Source-driver output for channel 7 with a built-in clamp diode for inductive loads; IOUT is rated −500 mA maximum per channel.
13 O6 output Source-driver output for channel 6 with a built-in clamp diode for inductive loads; IOUT is rated −500 mA maximum per channel.
14 O5 output Source-driver output for channel 5 with a built-in clamp diode for inductive loads; IOUT is rated −500 mA maximum per channel.
15 O4 output Source-driver output for channel 4 with a built-in clamp diode for inductive loads; IOUT is rated −500 mA maximum per channel.
16 O3 output Source-driver output for channel 3 with a built-in clamp diode for inductive loads; IOUT is rated −500 mA maximum per channel.
17 O2 output Source-driver output for channel 2 with a built-in clamp diode for inductive loads; IOUT is rated −500 mA maximum per channel.
18 O1 output Source-driver output for channel 1 with a built-in clamp diode for inductive loads; IOUT is rated −500 mA maximum per channel.

Key specifications

Parameter Value
Manufacturer XINLUDA
Package SOP-18-300mil
Category Display Modules / LED Drivers / Display Drivers
Pins 18

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power supply voltage VCC -0.5 50 V 4
Output current (for each channel) IOUT -500 mA 4
Input voltage VIN -0.5 30 V 4
Clamp diode reverse voltage VR 50 V 4
Clamp diode forward current IF 500 mA 4
Power dissipation (SOP18) PD 1 W SOP18 on PCB (Note 2); derate 11 mW/°C above Ta = 25°C 4
Operating temperature Topr -40 85 °C 4
Storage temperature Tstg -55 150 °C 4
Power supply voltage VCC 2 50 V IOUT = -100 mA; Ta = -40 to 85°C 5
Output current (for each channel), 1 circuit ON IOUT 0 -390 mA SOP18; 1 circuit ON, Ta = 25°C, tpw = 25 ms 5
Output current (for each channel), 8 circuits ON, Duty 10% IOUT 0 -360 mA SOP18; 8 circuits ON, Ta = 85°C, Tj = 120°C, Duty = 10% 5
Output current (for each channel), 8 circuits ON, Duty 50% IOUT 0 -150 mA SOP18; 8 circuits ON, Ta = 85°C, Tj = 120°C, Duty = 50% 5
Input voltage (output on) VIN (ON) 2 25 V IOUT = -100 mA or upper, VDS = 2.0 V 5
Input voltage (output off) VIN (OFF) 0 0.6 V IOUT = -100 µA or less, VDS = 2.0 V 5
Clamp diode forward current IF 350 mA 5
Output leakage current Ileak 2 µA VCC = 50 V, VIN = 0 V, Ta = 85°C 6
Output voltage (output ON) at IOUT = -350 mA VDS 0.7 1.5 V IOUT = -350 mA, VIN = 5.0 V, VCC = 5.0 V 6
Output ON-resistance at IOUT = -350 mA RON 1.6 3.25 Ω IOUT = -350 mA, VIN = 5.0 V, VCC = 5.0 V 6
Output voltage (output ON) at IOUT = -200 mA VDS 0.5 0.9 V IOUT = -200 mA, VIN = 5.0 V, VCC = 5.0 V 6
Output ON-resistance at IOUT = -200 mA RON 1.6 3.25 Ω IOUT = -200 mA, VIN = 5.0 V, VCC = 5.0 V 6
Output voltage (output ON) at IOUT = -100 mA VDS 0.3 0.7 V IOUT = -100 mA, VIN = 5.0 V, VCC = 5.0 V 6
Output ON-resistance at IOUT = -100 mA RON 1.6 3.25 Ω IOUT = -100 mA, VIN = 5.0 V, VCC = 5.0 V 6
Input current (output on) IIN (ON) 0.2 mA VIN = 2.0 V 6
Input current (output off) IIN (OFF) 3 µA VIN = 0 V, Ta = 85°C 6
Input voltage (output on) VIN (ON) 2 V IOUT = -100 mA or upper, VDS = 2.0 V 6
Supply current (for each channel) ICC 2 mA VIN = 2.0 V, VCC = 50 V, output open 6
Clamp diode reverse current IR 5 µA VR = 50 V, Ta = 85°C 6
Clamp diode forward voltage VF 2 V IF = 350 mA 6

CAD (KiCad official)

  • Symbol: XL62783
  • Footprint: Package_SO:SOP-18_7.495x11.515mm_P1.27mm
  • 3D model: SOP-18-300mil, generated on the KiCad land (body 7.495 x 11.515 mm, terminals on the pads, 2.65 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: xl62783-etched.step / xl62783-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); xl62783.step / xl62783.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: XINLUDA datasheet (10 pp, sha256 c7dd3114c5c4d730, retrieved 2026-11-13, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF