main
Ray
Publish 0.1.0
c1fa16e
XL62083
XINLUDA · Darlington Transistor Arrays · SOP-18-300mil
XL62083 from XINLUDA, in a SOP-18-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | I1 | input | Input for channel 1; the datasheet gives VIN(ON) of 2.5 V min to switch the output on and VIN(OFF) of 0.6 V max to switch it off, with absolute maximum input voltage of -0.5 to 30 V. |
| 2 | I2 | input | Input for channel 2; the datasheet gives VIN(ON) of 2.5 V min to switch the output on and VIN(OFF) of 0.6 V max to switch it off, with absolute maximum input voltage of -0.5 to 30 V. |
| 3 | I3 | input | Input for channel 3; the datasheet gives VIN(ON) of 2.5 V min to switch the output on and VIN(OFF) of 0.6 V max to switch it off, with absolute maximum input voltage of -0.5 to 30 V. |
| 4 | I4 | input | Input for channel 4; the datasheet gives VIN(ON) of 2.5 V min to switch the output on and VIN(OFF) of 0.6 V max to switch it off, with absolute maximum input voltage of -0.5 to 30 V. |
| 5 | I5 | input | Input for channel 5; the datasheet gives VIN(ON) of 2.5 V min to switch the output on and VIN(OFF) of 0.6 V max to switch it off, with absolute maximum input voltage of -0.5 to 30 V. |
| 6 | I6 | input | Input for channel 6; the datasheet gives VIN(ON) of 2.5 V min to switch the output on and VIN(OFF) of 0.6 V max to switch it off, with absolute maximum input voltage of -0.5 to 30 V. |
| 7 | I7 | input | Input for channel 7; the datasheet gives VIN(ON) of 2.5 V min to switch the output on and VIN(OFF) of 0.6 V max to switch it off, with absolute maximum input voltage of -0.5 to 30 V. |
| 8 | I8 | input | Input for channel 8; the datasheet gives VIN(ON) of 2.5 V min to switch the output on and VIN(OFF) of 0.6 V max to switch it off, with absolute maximum input voltage of -0.5 to 30 V. |
| 9 | GND | power_in | Ground pin of the device; the datasheet warns that the IC can be destroyed by improper grounding, so the GND line must be designed with utmost care. |
| 10 | COMMON | passive | Common pin tied to the clamp diodes of all outputs, with a recommended operating voltage of 0 to 50 V and absolute maximum of -0.5 to 50 V. |
| 11 | O8 | output | Open-drain sink DMOS output for channel 8, rated up to 50 V (VOUT max) and 500 mA per channel (IOUT max), with built-in clamp diode for inductive loads. |
| 12 | O7 | output | Open-drain sink DMOS output for channel 7, rated up to 50 V (VOUT max) and 500 mA per channel (IOUT max), with built-in clamp diode for inductive loads. |
| 13 | O6 | output | Open-drain sink DMOS output for channel 6, rated up to 50 V (VOUT max) and 500 mA per channel (IOUT max), with built-in clamp diode for inductive loads. |
| 14 | O5 | output | Open-drain sink DMOS output for channel 5, rated up to 50 V (VOUT max) and 500 mA per channel (IOUT max), with built-in clamp diode for inductive loads. |
| 15 | O4 | output | Open-drain sink DMOS output for channel 4, rated up to 50 V (VOUT max) and 500 mA per channel (IOUT max), with built-in clamp diode for inductive loads. |
| 16 | O3 | output | Open-drain sink DMOS output for channel 3, rated up to 50 V (VOUT max) and 500 mA per channel (IOUT max), with built-in clamp diode for inductive loads. |
| 17 | O2 | output | Open-drain sink DMOS output for channel 2, rated up to 50 V (VOUT max) and 500 mA per channel (IOUT max), with built-in clamp diode for inductive loads. |
| 18 | O1 | output | Open-drain sink DMOS output for channel 1, rated up to 50 V (VOUT max) and 500 mA per channel (IOUT max), with built-in clamp diode for inductive loads. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XINLUDA |
| Package | SOP-18-300mil |
| Category | Transistors |
| Pins | 18 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output leakage current | Ileak | 1 | µA | VOUT = 50 V, Ta = 85°C, VIN = 0 V | 6 | ||
| Input current (output on) | IIN (ON) | 0.1 | mA | VIN = 2.5 V | 6 | ||
| Input current (output off) | IIN (OFF) | 1 | µA | VIN = 0 V, Ta = 85°C | 6 | ||
| Input voltage (output on) | VIN (ON) | 2.5 | V | IOUT = 100 mA, VOUT = 2 V | 6 | ||
| Clamp diode reverse current | IR | 1 | µA | VR = 50 V, Ta = 85°C | 6 | ||
| Clamp diode forward voltage | VF | 2 | V | IF = 350 mA | 6 | ||
| Output voltage | VOUT | 50 | V | 4 | |||
| COMMON pin voltage | VCOM | -0.5 | 50 | V | 4 | ||
| Output current | IOUT | 500 | mA/ch | 4 | |||
| Input voltage | VIN | -0.5 | 30 | V | 4 | ||
| Clamp diode reverse voltage | VR | 50 | V | 4 | |||
| Clamp diode forward current | IF | 500 | mA | 4 | |||
| Power dissipation (PG) | PD | 1.47 | W | Note 1: device alone; derate 11.8 mW/°C above Ta 25°C | 4 | ||
| Power dissipation (FG) | PD | 0.96 | W | Note 2: device alone; derate 7.7 mW/°C above Ta 25°C | 4 | ||
| Power dissipation (FNG) | PD | 0.96 | W | Note 3: on PCB 50×50×1.6 mm, Cu 40%; derate 7.7 mW/°C above Ta 25°C | 4 | ||
| Power dissipation (FWG) | PD | 1.31 | W | Note 4: on PCB 75×114×1.6 mm, Cu 20%; derate 10.48 mW/°C above Ta 25°C | 4 | ||
| Operating temperature | Topr | -40 | 85 | °C | 4 | ||
| Storage temperature | Tstg | -55 | 150 | °C | 4 | ||
| Output voltage | VOUT | 50 | V | 5 | |||
| COMMON pin voltage | VCOM | 0 | 50 | V | 5 | ||
| Output current (PG) | IOUT | 0 | 400 | mA/ch | PG, 1 circuit ON, Ta = 25°C | 5 | |
| Output current (PG) | IOUT | 0 | 390 | mA/ch | PG, tpw = 25 ms, 8 circuits ON, Ta = 85°C, Tj = 120°C, Duty = 10% | 5 | |
| Output current (PG) | IOUT | 0 | 170 | mA/ch | PG, tpw = 25 ms, 8 circuits ON, Ta = 85°C, Tj = 120°C, Duty = 50% | 5 | |
| Output current (FG) | IOUT | 0 | 400 | mA/ch | FG, 1 circuit ON, Ta = 25°C | 5 | |
| Output current (FG) | IOUT | 0 | 320 | mA/ch | FG, tpw = 25 ms, 8 circuits ON, Ta = 85°C, Tj = 120°C, Duty = 10% | 5 | |
| Output current (FG) | IOUT | 0 | 140 | mA/ch | FG, tpw = 25 ms, 8 circuits ON, Ta = 85°C, Tj = 120°C, Duty = 50% | 5 | |
| Output current (FNG) | IOUT | 0 | 400 | mA/ch | FNG, 1 circuit ON, Ta = 25°C | 5 | |
| Output current (FNG) | IOUT | 0 | 320 | mA/ch | FNG, tpw = 25 ms, 8 circuits ON, Ta = 85°C, Tj = 120°C, Duty = 10% | 5 | |
| Output current (FNG) | IOUT | 0 | 140 | mA/ch | FNG, tpw = 25 ms, 8 circuits ON, Ta = 85°C, Tj = 120°C, Duty = 50% | 5 | |
| Output current (FWG) | IOUT | 0 | 400 | mA/ch | FWG, 1 circuit ON, Ta = 25°C | 5 | |
| Output current (FWG) | IOUT | 0 | 370 | mA/ch | FWG, tpw = 25 ms, 8 circuits ON, Ta = 85°C, Tj = 120°C, Duty = 10% | 5 | |
| Output current (FWG) | IOUT | 0 | 160 | mA/ch | FWG, tpw = 25 ms, 8 circuits ON, Ta = 85°C, Tj = 120°C, Duty = 50% | 5 | |
| Input voltage (output on) | VIN (ON) | 2.5 | 25 | V | IOUT = 100 mA or upper, VOUT = 2 V | 5 | |
| Input voltage (output off) | VIN (OFF) | 0 | 0.6 | V | IOUT = 100 µA or less, VOUT = 2 V | 5 | |
| Clamp diode forward current | IF | 400 | mA | 5 |
CAD (KiCad official)
- Symbol:
XL62083 - Footprint:
Package_SO:SOP-18_7.495x11.515mm_P1.27mm - 3D model: SOP-18-300mil, generated on the KiCad land (body 7.495 x 11.515 mm, terminals on the pads, 2.65 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
xl62083-etched.step/xl62083-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xl62083.step/xl62083.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XINLUDA datasheet (9 pp, sha256
1e4c6d8888c4841d, retrieved 2026-11-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# XL62083
**XINLUDA** · Darlington Transistor Arrays · SOP-18-300mil
XL62083 from XINLUDA, in a SOP-18-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | I1 | input | Input for channel 1; the datasheet gives VIN(ON) of 2.5 V min to switch the output on and VIN(OFF) of 0.6 V max to switch it off, with absolute maximum input voltage of -0.5 to 30 V. |
| 2 | I2 | input | Input for channel 2; the datasheet gives VIN(ON) of 2.5 V min to switch the output on and VIN(OFF) of 0.6 V max to switch it off, with absolute maximum input voltage of -0.5 to 30 V. |
| 3 | I3 | input | Input for channel 3; the datasheet gives VIN(ON) of 2.5 V min to switch the output on and VIN(OFF) of 0.6 V max to switch it off, with absolute maximum input voltage of -0.5 to 30 V. |
| 4 | I4 | input | Input for channel 4; the datasheet gives VIN(ON) of 2.5 V min to switch the output on and VIN(OFF) of 0.6 V max to switch it off, with absolute maximum input voltage of -0.5 to 30 V. |
| 5 | I5 | input | Input for channel 5; the datasheet gives VIN(ON) of 2.5 V min to switch the output on and VIN(OFF) of 0.6 V max to switch it off, with absolute maximum input voltage of -0.5 to 30 V. |
| 6 | I6 | input | Input for channel 6; the datasheet gives VIN(ON) of 2.5 V min to switch the output on and VIN(OFF) of 0.6 V max to switch it off, with absolute maximum input voltage of -0.5 to 30 V. |
| 7 | I7 | input | Input for channel 7; the datasheet gives VIN(ON) of 2.5 V min to switch the output on and VIN(OFF) of 0.6 V max to switch it off, with absolute maximum input voltage of -0.5 to 30 V. |
| 8 | I8 | input | Input for channel 8; the datasheet gives VIN(ON) of 2.5 V min to switch the output on and VIN(OFF) of 0.6 V max to switch it off, with absolute maximum input voltage of -0.5 to 30 V. |
| 9 | GND | power_in | Ground pin of the device; the datasheet warns that the IC can be destroyed by improper grounding, so the GND line must be designed with utmost care. |
| 10 | COMMON | passive | Common pin tied to the clamp diodes of all outputs, with a recommended operating voltage of 0 to 50 V and absolute maximum of -0.5 to 50 V. |
| 11 | O8 | output | Open-drain sink DMOS output for channel 8, rated up to 50 V (VOUT max) and 500 mA per channel (IOUT max), with built-in clamp diode for inductive loads. |
| 12 | O7 | output | Open-drain sink DMOS output for channel 7, rated up to 50 V (VOUT max) and 500 mA per channel (IOUT max), with built-in clamp diode for inductive loads. |
| 13 | O6 | output | Open-drain sink DMOS output for channel 6, rated up to 50 V (VOUT max) and 500 mA per channel (IOUT max), with built-in clamp diode for inductive loads. |
| 14 | O5 | output | Open-drain sink DMOS output for channel 5, rated up to 50 V (VOUT max) and 500 mA per channel (IOUT max), with built-in clamp diode for inductive loads. |
| 15 | O4 | output | Open-drain sink DMOS output for channel 4, rated up to 50 V (VOUT max) and 500 mA per channel (IOUT max), with built-in clamp diode for inductive loads. |
| 16 | O3 | output | Open-drain sink DMOS output for channel 3, rated up to 50 V (VOUT max) and 500 mA per channel (IOUT max), with built-in clamp diode for inductive loads. |
| 17 | O2 | output | Open-drain sink DMOS output for channel 2, rated up to 50 V (VOUT max) and 500 mA per channel (IOUT max), with built-in clamp diode for inductive loads. |
| 18 | O1 | output | Open-drain sink DMOS output for channel 1, rated up to 50 V (VOUT max) and 500 mA per channel (IOUT max), with built-in clamp diode for inductive loads. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XINLUDA |
| Package | SOP-18-300mil |
| Category | Transistors |
| Pins | 18 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output leakage current | Ileak | | | 1 | µA | VOUT = 50 V, Ta = 85°C, VIN = 0 V | 6 |
| Input current (output on) | IIN (ON) | | | 0.1 | mA | VIN = 2.5 V | 6 |
| Input current (output off) | IIN (OFF) | | | 1 | µA | VIN = 0 V, Ta = 85°C | 6 |
| Input voltage (output on) | VIN (ON) | | | 2.5 | V | IOUT = 100 mA, VOUT = 2 V | 6 |
| Clamp diode reverse current | IR | | | 1 | µA | VR = 50 V, Ta = 85°C | 6 |
| Clamp diode forward voltage | VF | | | 2 | V | IF = 350 mA | 6 |
| Output voltage | VOUT | | | 50 | V | | 4 |
| COMMON pin voltage | VCOM | -0.5 | | 50 | V | | 4 |
| Output current | IOUT | | | 500 | mA/ch | | 4 |
| Input voltage | VIN | -0.5 | | 30 | V | | 4 |
| Clamp diode reverse voltage | VR | | | 50 | V | | 4 |
| Clamp diode forward current | IF | | | 500 | mA | | 4 |
| Power dissipation (PG) | PD | | | 1.47 | W | Note 1: device alone; derate 11.8 mW/°C above Ta 25°C | 4 |
| Power dissipation (FG) | PD | | | 0.96 | W | Note 2: device alone; derate 7.7 mW/°C above Ta 25°C | 4 |
| Power dissipation (FNG) | PD | | | 0.96 | W | Note 3: on PCB 50×50×1.6 mm, Cu 40%; derate 7.7 mW/°C above Ta 25°C | 4 |
| Power dissipation (FWG) | PD | | | 1.31 | W | Note 4: on PCB 75×114×1.6 mm, Cu 20%; derate 10.48 mW/°C above Ta 25°C | 4 |
| Operating temperature | Topr | -40 | | 85 | °C | | 4 |
| Storage temperature | Tstg | -55 | | 150 | °C | | 4 |
| Output voltage | VOUT | | | 50 | V | | 5 |
| COMMON pin voltage | VCOM | 0 | | 50 | V | | 5 |
| Output current (PG) | IOUT | 0 | | 400 | mA/ch | PG, 1 circuit ON, Ta = 25°C | 5 |
| Output current (PG) | IOUT | 0 | | 390 | mA/ch | PG, tpw = 25 ms, 8 circuits ON, Ta = 85°C, Tj = 120°C, Duty = 10% | 5 |
| Output current (PG) | IOUT | 0 | | 170 | mA/ch | PG, tpw = 25 ms, 8 circuits ON, Ta = 85°C, Tj = 120°C, Duty = 50% | 5 |
| Output current (FG) | IOUT | 0 | | 400 | mA/ch | FG, 1 circuit ON, Ta = 25°C | 5 |
| Output current (FG) | IOUT | 0 | | 320 | mA/ch | FG, tpw = 25 ms, 8 circuits ON, Ta = 85°C, Tj = 120°C, Duty = 10% | 5 |
| Output current (FG) | IOUT | 0 | | 140 | mA/ch | FG, tpw = 25 ms, 8 circuits ON, Ta = 85°C, Tj = 120°C, Duty = 50% | 5 |
| Output current (FNG) | IOUT | 0 | | 400 | mA/ch | FNG, 1 circuit ON, Ta = 25°C | 5 |
| Output current (FNG) | IOUT | 0 | | 320 | mA/ch | FNG, tpw = 25 ms, 8 circuits ON, Ta = 85°C, Tj = 120°C, Duty = 10% | 5 |
| Output current (FNG) | IOUT | 0 | | 140 | mA/ch | FNG, tpw = 25 ms, 8 circuits ON, Ta = 85°C, Tj = 120°C, Duty = 50% | 5 |
| Output current (FWG) | IOUT | 0 | | 400 | mA/ch | FWG, 1 circuit ON, Ta = 25°C | 5 |
| Output current (FWG) | IOUT | 0 | | 370 | mA/ch | FWG, tpw = 25 ms, 8 circuits ON, Ta = 85°C, Tj = 120°C, Duty = 10% | 5 |
| Output current (FWG) | IOUT | 0 | | 160 | mA/ch | FWG, tpw = 25 ms, 8 circuits ON, Ta = 85°C, Tj = 120°C, Duty = 50% | 5 |
| Input voltage (output on) | VIN (ON) | 2.5 | | 25 | V | IOUT = 100 mA or upper, VOUT = 2 V | 5 |
| Input voltage (output off) | VIN (OFF) | 0 | | 0.6 | V | IOUT = 100 µA or less, VOUT = 2 V | 5 |
| Clamp diode forward current | IF | | | 400 | mA | | 5 |
## CAD (KiCad official)
- Symbol: `XL62083`
- Footprint: `Package_SO:SOP-18_7.495x11.515mm_P1.27mm`
- 3D model: SOP-18-300mil, generated on the KiCad land (body 7.495 x 11.515 mm, terminals on the pads, 2.65 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `xl62083-etched.step` / `xl62083-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `xl62083.step` / `xl62083.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [XINLUDA datasheet](docs/xl62083-datasheet.pdf) (9 pp, sha256 `1e4c6d8888c4841d`, retrieved 2026-11-13, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/xl62083-datasheet.pdf)