component
XL62004
Public Made by Adomby adom
XINLUDA Darlington Transistor Arrays, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownXL62004
XINLUDA · Darlington Transistor Arrays · SOIC-16
XL62004 from XINLUDA, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | I1 | input | Channel 1 input with 10.5 kΩ base resistor for 6-V to 15-V PMOS/CMOS drive; VIN 0 to 24 V, output off at 1.0 V max, on at 6.2 V min. |
| 2 | I2 | input | Channel 2 input with 10.5 kΩ base resistor for 6-V to 15-V PMOS/CMOS drive; VIN 0 to 24 V, output off at 1.0 V max, on at 6.2 V min. |
| 3 | I3 | input | Channel 3 input with 10.5 kΩ base resistor for 6-V to 15-V PMOS/CMOS drive; VIN 0 to 24 V, output off at 1.0 V max, on at 6.2 V min. |
| 4 | I4 | input | Channel 4 input with 10.5 kΩ base resistor for 6-V to 15-V PMOS/CMOS drive; VIN 0 to 24 V, output off at 1.0 V max, on at 6.2 V min. |
| 5 | I5 | input | Channel 5 input with 10.5 kΩ base resistor for 6-V to 15-V PMOS/CMOS drive; VIN 0 to 24 V, output off at 1.0 V max, on at 6.2 V min. |
| 6 | I6 | input | Channel 6 input with 10.5 kΩ base resistor for 6-V to 15-V PMOS/CMOS drive; VIN 0 to 24 V, output off at 1.0 V max, on at 6.2 V min. |
| 7 | I7 | input | Channel 7 input with 10.5 kΩ base resistor for 6-V to 15-V PMOS/CMOS drive; VIN 0 to 24 V, output off at 1.0 V max, on at 6.2 V min. |
| 8 | GND | power_in | Ground pin of the driver array. |
| 9 | COMMON | passive | Common cathode of the output clamp diodes, connected to the load supply; clamp diode reverse voltage 50 V max and forward current 500 mA max. |
| 10 | O7 | output | Channel 7 open-collector Darlington sink output, 500 mA max and 50 V sustaining voltage. |
| 11 | O6 | output | Channel 6 open-collector Darlington sink output, 500 mA max and 50 V sustaining voltage. |
| 12 | O5 | output | Channel 5 open-collector Darlington sink output, 500 mA max and 50 V sustaining voltage. |
| 13 | O4 | output | Channel 4 open-collector Darlington sink output, 500 mA max and 50 V sustaining voltage. |
| 14 | O3 | output | Channel 3 open-collector Darlington sink output, 500 mA max and 50 V sustaining voltage. |
| 15 | O2 | output | Channel 2 open-collector Darlington sink output, 500 mA max and 50 V sustaining voltage. |
| 16 | O1 | output | Channel 1 open-collector Darlington sink output, 500 mA max and 50 V sustaining voltage. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XINLUDA |
| Package | SOIC-16 |
| Category | Transistors/Thyristors |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output sustaining voltage | VCE (SUS) | -0.5 | 50 | V | 2 | ||
| Output current | IOUT | 500 | mA/ch | 2 | |||
| Input voltage | VIN | -0.5 | 30 | V | Note 1 | 2 | |
| Input current | IIN | 25 | mA | Note 2 | 2 | ||
| Clamp diode reverse voltage | VR | 50 | V | 2 | |||
| Clamp diode forward current | IF | 500 | mA | 2 | |||
| Operating temperature | Topr | -40 | 85 | °C | 2 | ||
| Storage temperature | Tstg | -55 | 150 | °C | 2 | ||
| Output sustaining voltage | VCE (SUS) | 0 | 50 | V | Ta = −40°C to 85°C | 3 | |
| Output current (7 circuits, duty 10%) | IOUT | 0 | 370 | mA/ch | Tpw = 25ms, Duty = 10% | 3 | |
| Output current (7 circuits, duty 50%) | IOUT | 0 | 130 | mA/ch | 7 circuits, Duty = 50% | 3 | |
| Output current (Ta = 85°C, Tj = 120°C, duty 10%) | IOUT | 0 | 233 | mA/ch | Ta = 85°C, Tj = 120°C, Duty = 10% | 3 | |
| Output current (Ta = 85°C, Tj = 120°C, duty 50%) | IOUT | 0 | 70 | mA/ch | Ta = 85°C, Tj = 120°C, Duty = 50% | 3 | |
| Input voltage | VIN | 0 | 24 | V | 3 | ||
| Input voltage (output on) | VIN (ON) | 6.2 | 24 | V | IOUT = 400mA, hFE = 800 | 3 | |
| Input voltage (output off) | VIN (OFF) | 0 | 1 | V | 3 | ||
| Clamp diode reverse voltage | VR | 50 | V | 3 | |||
| Clamp diode forward current | IF | 350 | mA | 3 | |||
| Power dissipation | PD | 0.76 | W | Ta = 85°C | 3 | ||
| Power dissipation (PCB mounted) | PD | 0.325 | W | Ta = 85°C; mounted on glass-epoxy PCB (30 mm × 30 mm × 1.6 mm, Cu area: 50%) | 3 | ||
| Output leakage current | ICEX | 50 | µA | VCE = 50 V, Ta = 25°C | 4 | ||
| Output leakage current | ICEX | 100 | µA | VCE = 50 V, Ta = 85°C | 4 | ||
| Collector-emitter saturation voltage | VCE (sat) | 1.3 | 1.6 | V | IOUT = 350 mA, IIN = 500 µA | 4 | |
| Collector-emitter saturation voltage | VCE (sat) | 1.1 | 1.3 | V | IOUT = 200 mA, IIN = 350 µA | 4 | |
| Collector-emitter saturation voltage | VCE (sat) | 0.9 | 1.1 | V | IOUT = 100 mA, IIN = 250 µA | 4 | |
| DC current transfer ratio | hFE | 1000 | VCE = 2 V, IOUT = 350 mA | 4 | |||
| Input current (output on) | IIN (ON) | 0.8 | 1.2 | mA | VIN = 9.5 V, IOUT = 350mA | 4 | |
| Input current (output off) | IIN (OFF) | 50 | 65 | µA | IOUT = 500 µA, Ta = 85°C | 4 | |
| Input voltage (output on) | VIN(ON) | 4.7 | V | VCE = 2V, hFE = 800, IOUT = 350mA | 4 | ||
| Input voltage (output on) | VIN(ON) | 4.4 | V | VCE = 2V, hFE = 800, IOUT = 200mA | 4 | ||
| Clamp diode reverse current | IR | 50 | µA | VR = 50 V, Ta = 25°C | 4 | ||
| Clamp diode reverse current | IR | 100 | µA | VR = 50 V, Ta = 85°C | 4 | ||
| Clamp diode forward voltage | VF | 2 | V | IF = 350 mA | 4 | ||
| Input capacitance | CIN | 15 | pF | 4 | |||
| Turn-on delay | tON | 0.1 | µs | VOUT = 50V, RL = 125Ω, CL = 15 pF | 4 | ||
| Turn-off delay | tOFF | 0.2 | µs | VOUT = 50V, RL = 125Ω, CL = 15 pF | 4 |
CAD (KiCad official)
- Symbol:
XL62004 - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files:
xl62004-etched.step/xl62004-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xl62004.step/xl62004.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XINLUDA datasheet (12 pp, sha256
02ed33ac2b3bbb89, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).