XL6019E1

{
 "schema": "adom.pads/1",
 "slug": "xl6019e1",
 "footprint": "TO-263-5_TabPin6",
 "generated_from": {
  "footprint": "TO-263-5_TabPin6@sha256:77e8ff2d643255fc",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -7.65,
   -3.4
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "TO-263-5_TabPin6@sha256:77e8ff2d643255fc"
 },
 "pad_count": 6,
 "symbol_pins": [
  "1",
  "2",
  "3",
  "4",
  "5",
  "6"
 ],
 "paste_apertures": 4,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -7.65,
    -3.4
   ],
   "rot": 0.0,
   "size": [
    4.6,
    1.1
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "GND",
   "type": "power_in",
   "description": "Ground pin. Common return for input, output and internal circuitry.",
   "is_pin1": true,
   "source": {
    "geometry": "TO-263-5_TabPin6.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -7.65,
    -1.7
   ],
   "rot": 0.0,
   "size": [
    4.6,
    1.1
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "EN",
   "type": "input",
   "description": "Enable pin. TTL-compatible: logic low shuts the converter down, logic high enables operation. Threshold typ. 1.4V (high) / 0.8V (low). Floating is treated as high. VEN range -0.3V to VIN.",
   "is_pin1": false,
   "source": {
    "geometry": "TO-263-5_TabPin6.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -7.65,
    0.0
   ],
   "rot": 0.0,
   "size": [
    4.6,
    1.1
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "SW",
   "type": "output",
   "description": "Power switch output. Drain of the internal N-channel power MOSFET; connect to the inductor/diode boost node. Absolute max VSW = 60V, internal SW overvoltage clamp typ. 60V. Also brought out on the metal tab.",
   "is_pin1": false,
   "source": {
    "geometry": "TO-263-5_TabPin6.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -7.65,
    1.7
   ],
   "rot": 0.0,
   "size": [
    4.6,
    1.1
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "4",
   "name": "VIN",
   "type": "power_in",
   "description": "Power supply input, 5V to 40V DC. Requires a bulk electrolytic capacitor between VIN and GND to suppress noise. Absolute max 45V.",
   "is_pin1": false,
   "source": {
    "geometry": "TO-263-5_TabPin6.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "5",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -7.65,
    3.4
   ],
   "rot": 0.0,
   "size": [
    4.6,
    1.1
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "5",
   "name": "FB",
   "type": "input",
   "description": "Output-voltage feedback sense pin. Internal reference is 1.25V; set VOUT with a resistor divider using VOUT = 1.25 × (1 + R2/R1).",
   "is_pin1": false,
   "source": {
    "geometry": "TO-263-5_TabPin6.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "6",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    1.5,
    0.0
   ],
   "rot": 0.0,
   "size": [
    9.4,
    10.8
   ],
   "layers": [
    "F.Cu",
    "F.Mask"
   ],
   "thermal": false,
   "pin": "6",
   "name": "TAB",
   "type": "power_in",
   "description": "Exposed thermal pad. Present in the package land pattern; connect it per the manufacturer datasheet thermal recommendation. Added because the footprint carries this pad and the symbol had no pin for it.",
   "is_pin1": false,
   "source": {
    "geometry": "TO-263-5_TabPin6.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}