Generated by kicad-footprint-generator · KiCad file format 20260206
XL6006E1
XLSEMI · DC-DC Converters · TO-263-5
XL6006E1 from XLSEMI, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin. Return for the internal power NMOS source and control circuitry. Tie to the system ground plane with a low-impedance path. |
| 2 | EN | input | Enable pin. Drive low (<0.8 V) to shut down the regulator, drive high (>1.4 V) to enable it. Floating defaults high (regulator ON). Absolute max V_EN = V_IN. |
| 3 | SW | passive | Power switch output. Drain of the internal power NMOS; connects to the boost inductor and Schottky rectifier. Rated to 60 V; typical Rds(on) ~35 mΩ at Vin=12 V, Isw=5 A. Metal tab is also SW. |
| 4 | VIN | power_in | Supply voltage input. Operates from 5 V to 32 V DC (abs max 36 V). Bypass VIN to GND with a suitably large capacitor (e.g. 47 µF) to eliminate input noise. |
| 5 | FB | input | Feedback pin. Regulates to a 0.22 V threshold (typ, 209-231 mV) across the LED current-sense resistor Rs; LED current I_LED = 0.22 V / Rs. |
| 6 | SW | passive | Package tab (pad 6). printed: Metal Tab SW. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XLSEMI |
| Package | TO-263-5 |
| Category | PMIC |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | Vin | -0.3 | 36 | V | 4 | ||
| Feedback Pin Voltage | VFB | -0.3 | V | 4 | |||
| EN Pin Voltage | VEN | -0.3 | V | 4 | |||
| Output Switch Pin Voltage | VOutput | -0.3 | 60 | V | 4 | ||
| Operating Junction Temperature | TJ | -40 | 125 | ºC | 4 | ||
| Storage Temperature | TSTG | -65 | 150 | ºC | 4 | ||
| Lead Temperature (Soldering) | TLEAD | 260 | ºC | Soldering, 10 sec | 4 | ||
| ESD (HBM) | 2000 | V | HBM | 4 | |||
| Thermal Resistance Junction to Ambient (TO263-5L) | RJA | 30 | ºC/W | Junction to Ambient, No Heatsink, Free Air | 4 | ||
| Feedback Voltage | VFB | 209 | 220 | 231 | mV | Vin = 5V to 12V, Vout=24V, Iload=100mA | 5 |
| Input operation voltage | Vin | 5 | 32 | V | Table header: Vin = 12V, GND=0V, Iout=100mA, Ta = 25℃ | 5 | |
| Shutdown Supply Current | ISTBY | 70 | 100 | uA | VEN=0V | 5 | |
| Quiescent Supply Current | Iq | 2.5 | 5 | mA | VEN =2V, VFB =Vin | 5 | |
| Oscillator Frequency | Fosc | 144 | 180 | 216 | KHz | 5 | |
| Switch Current Limit | IL | 5 | A | VFB =0 | 5 | ||
| Output Power NMOS Rdson | Rdson | 35 | 40 | mohm | Vin=12V, ISW=5A | 5 | |
| EN Pin Threshold VEN High (Regulator ON) | VEN | 1.4 | V | 5 | |||
| EN Pin Threshold VEN Low (Regulator OFF) | VEN | 0.8 | V | 5 | |||
| EN Pin Input Leakage Current (ON) | IH | 3 | 10 | uA | VEN =2V (ON) | 5 | |
| EN Pin Input Leakage Current (OFF) | IL | 3 | 10 | uA | VEN =0V (OFF) | 5 | |
| Max. Duty Cycle | DMAX | 90 | % | VFB=0V | 5 |
CAD (KiCad official)
- Symbol:
XL6006E1 - Footprint:
Package_TO_SOT_SMD:TO-263-5_TabPin6 - 3D model: TO-263-5 (KiCad packages3D, STEP)
- 3D model files:
xl6006e1-etched.step/xl6006e1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xl6006e1.step/xl6006e1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XLSEMI datasheet (11 pp, sha256
ca1282d95687faf7, retrieved 2026-11-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).