3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownXL6005E1
XLSEMI · DC-DC Converters · TO-252-5
XL6005E1 from XLSEMI, in a TO-252-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Device ground return. All internal reference, control and power-stage currents return through this pin. |
| 2 | EN | input | Enable / PWM-dimming input. TTL-compatible: drive low (<0.8 V) to shut down the regulator (~70 uA ISTBY), drive high (>1.4 V) to enable. Floating defaults high. Can be toggled with a PWM signal for LED dimming. |
| 3 | SW | passive | Power switch (drain of internal N-MOSFET) output. Connects to the boost inductor and Schottky rectifier. Rated up to 60 V and 4 A switch current, Rdson ~110 mohm. Metal tab is also tied to SW. |
| 4 | VIN | power_in | Supply voltage input. Operates from 3.6 V to 32 V DC (abs-max 36 V). Bypass to GND with a suitably large low-ESR capacitor to eliminate input noise. |
| 5 | FB | input | Feedback input to the internal error amplifier. Regulates to a 0.22 V (typ; 209-231 mV) threshold, typically set by a current-sense resistor RS at the LED string return: ILED = 0.22 V / RS. |
| 6 | SW | passive | Package tab (pad 6). printed: Metal Tab SW. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XLSEMI |
| Package | TO-252-5 |
| Category | PMIC |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Feedback Voltage | VFB | 209 | 220 | 231 | mV | Vin = 5V to 12V, Vout=24V, Iload=100mA | 5 |
| Input operation voltage | Vin | 3.6 | 32 | V | 5 | ||
| Shutdown Supply Current | ISTBY | 70 | 100 | uA | VEN=0V | 5 | |
| Quiescent Supply Current | Iq | 2.5 | 5 | mA | VEN =2V, VFB =Vin | 5 | |
| Oscillator Frequency | Fosc | 144 | 180 | 216 | Khz | 5 | |
| Switch Current Limit | IL | 4 | A | VFB =0 | 5 | ||
| Output Power NMOS on-resistance | Rdson | 110 | 120 | mohm | Vin=12V, ISW=4A | 5 | |
| EN Pin Threshold High (Regulator ON) | VEN | 1.4 | V | 5 | |||
| EN Pin Threshold Low (Regulator OFF) | VEN | 0.8 | V | 5 | |||
| EN Pin Input Leakage Current (ON) | IH | 3 | 10 | uA | VEN =2V (ON) | 5 | |
| EN Pin Input Leakage Current (OFF) | IL | 3 | 10 | uA | VEN =0V (OFF) | 5 | |
| Max. Duty Cycle | DMAX | 90 | % | VFB=0V | 5 | ||
| Input Voltage | Vin | -0.3 | 36 | V | 4 | ||
| Feedback Pin Voltage | VFB | -0.3 | V | Upper limit printed as Vin | 4 | ||
| EN Pin Voltage | VEN | -0.3 | V | Upper limit printed as Vin | 4 | ||
| Output Switch Pin Voltage | VOutput | -0.3 | 60 | V | 4 | ||
| Thermal Resistance (Junction to Ambient) | RJA | 50 | ºC/W | TO252-5L, Junction to Ambient, No Heatsink, Free Air | 4 | ||
| Operating Junction Temperature | TJ | -40 | 125 | ºC | 4 | ||
| Storage Temperature | TSTG | -65 | 150 | ºC | 4 | ||
| Lead Temperature (Soldering) | TLEAD | 260 | ºC | Soldering, 10 sec | 4 | ||
| ESD (HBM) | 2000 | V | Human body model; printed as >2000 | 4 |
CAD (KiCad official)
- Symbol:
XL6005E1 - Footprint:
Package_TO_SOT_SMD:TO-252-5_TabPin6 - 3D model: TO-252-5 (KiCad packages3D, STEP)
- 3D model files:
xl6005e1-etched.step/xl6005e1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xl6005e1.step/xl6005e1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XLSEMI datasheet (10 pp, sha256
e057cbbb0c7feabf, retrieved 2026-11-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).