XL4005E1

{
 "schema": "adom.pads/1",
 "slug": "xl4005e1",
 "footprint": "TO-263-5_TabPin6",
 "generated_from": {
  "footprint": "TO-263-5_TabPin6@sha256:77e8ff2d643255fc",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -7.65,
   -3.4
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "TO-263-5_TabPin6@sha256:77e8ff2d643255fc"
 },
 "pad_count": 6,
 "symbol_pins": [
  "1",
  "2",
  "3",
  "4",
  "5",
  "6"
 ],
 "paste_apertures": 4,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -7.65,
    -3.4
   ],
   "rot": 0.0,
   "size": [
    4.6,
    1.1
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "GND",
   "type": "power_in",
   "description": "Ground pin. Should be placed outside the Schottky diode-to-output-capacitor ground path to prevent switching current spikes from inducing voltage noise into the XL4005.",
   "is_pin1": true,
   "source": {
    "geometry": "TO-263-5_TabPin6.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -7.65,
    -1.7
   ],
   "rot": 0.0,
   "size": [
    4.6,
    1.1
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "FB",
   "type": "input",
   "description": "Feedback pin. Senses the output voltage through an external resistor divider network and regulates it. Feedback threshold voltage is 0.8V.",
   "is_pin1": false,
   "source": {
    "geometry": "TO-263-5_TabPin6.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -7.65,
    0.0
   ],
   "rot": 0.0,
   "size": [
    4.6,
    1.1
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "SW",
   "type": "output",
   "description": "Power switch output pin. Switch node connected to the internal power MOSFET (25 mΩ) that supplies power to the output inductor. Also connected to the exposed metal tab of the TO263-5L package.",
   "is_pin1": false,
   "source": {
    "geometry": "TO-263-5_TabPin6.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -7.65,
    1.7
   ],
   "rot": 0.0,
   "size": [
    4.6,
    1.1
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "4",
   "name": "EN",
   "type": "input",
   "description": "Enable pin. Drive high (>1.4V) to turn the device on; drive low (<0.8V) to turn it off. TTL-compatible with hysteresis.",
   "is_pin1": false,
   "source": {
    "geometry": "TO-263-5_TabPin6.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "5",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -7.65,
    3.4
   ],
   "rot": 0.0,
   "size": [
    4.6,
    1.1
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "5",
   "name": "VIN",
   "type": "power_in",
   "description": "Supply voltage input pin. Operates from 5V to 32V DC (absolute max 35V). Bypass VIN to GND with a suitably large capacitor (e.g. 220µF/50V) to eliminate input noise.",
   "is_pin1": false,
   "source": {
    "geometry": "TO-263-5_TabPin6.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "6",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    1.5,
    0.0
   ],
   "rot": 0.0,
   "size": [
    9.4,
    10.8
   ],
   "layers": [
    "F.Cu",
    "F.Mask"
   ],
   "thermal": false,
   "pin": "6",
   "name": "TAB",
   "type": "power_in",
   "description": "Exposed thermal pad. Present in the package land pattern; connect it per the manufacturer datasheet thermal recommendation. Added because the footprint carries this pad and the symbol had no pin for it.",
   "is_pin1": false,
   "source": {
    "geometry": "TO-263-5_TabPin6.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}