main
Ray
Publish 0.2.0
ace10c1
XL4003E1
XLSEMI · DC-DC Converters · TO-252-5
XL4003E1 from XLSEMI, in a TO-252-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin. Must be placed outside the Schottky diode-to-output-capacitor ground path to prevent switching current spikes from inducing voltage noise into the IC. |
| 2 | FB | input | Feedback pin. Senses the output voltage through an external resistor divider and regulates it. Internal feedback threshold voltage is 0.8V; Vout = 0.8 * (1 + R2/R1). |
| 3 | SW | passive | Power switch output pin. Switch node that supplies power to the external inductor / Schottky diode / output filter. The metal tab is electrically connected to SW. |
| 4 | EN | input | Enable pin with hysteresis and TTL-compatible shutdown. Drive high (>=1.4V) to turn on the regulator, drive low (<=0.8V) to turn it off. Shutdown supply current ~60uA typ. |
| 5 | VIN | power_in | Supply voltage input pin. Operates from 5V to 32V DC (absolute max 35V). Bypass to GND with a suitably large capacitor (e.g. 220uF/50V) to eliminate input noise. |
| 6 | SW | passive | Package tab (pad 6). printed: Metal Tab SW. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XLSEMI |
| Package | TO-252-5 |
| Category | PMIC |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | Vin | -0.3 | 35 | V | 4 | ||
| Feedback Pin Voltage | VFB | -0.3 | V | 4 | |||
| EN Pin Voltage | VEN | -0.3 | V | 4 | |||
| Output Switch Pin Voltage | VSW | -0.3 | V | 4 | |||
| Operating Junction Temperature | TJ | -40 | 125 | oC | 4 | ||
| Storage Temperature | TSTG | -65 | 150 | oC | 4 | ||
| Lead Temperature | TLEAD | 260 | oC | Soldering, 10 sec | 4 | ||
| ESD (HBM) | 2000 | V | HBM | 4 | |||
| Thermal Resistance (Junction to Ambient, No Heatsink, Free Air) | RJA | 50 | oC/W | TO252-5L, junction to ambient, no heatsink, free air | 4 | ||
| Feedback Voltage | VFB | 0.776 | 0.8 | 0.824 | V | Vin = 7V to 32V, Vout=5V; Iload=0.3A to 4A | 5 |
| Input operation voltage | Vin | 5 | 32 | V | 5 | ||
| Shutdown Supply Current | IS | 60 | 200 | uA | VEN=0V | 5 | |
| Quiescent Supply Current | Iq | 3 | 5 | mA | VEN =2V, VFB =Vin | 5 | |
| Oscillator Frequency | Fosc | 240 | 300 | 360 | Khz | 5 | |
| Switch Current Limit | IL | 6 | A | VFB =0V | 5 | ||
| EN Pin Threshold High (Regulator ON) | VEN | 1.4 | V | High (Regulator ON) | 5 | ||
| EN Pin Threshold Low (Regulator OFF) | VEN | 0.8 | V | Low (Regulator OFF) | 5 | ||
| EN Pin Input Leakage Current (ON) | IH | 1 | 15 | uA | VEN =2V (ON) | 5 | |
| EN Pin Input Leakage Current (OFF) | IL | 1 | 15 | uA | VEN =0V (OFF) | 5 | |
| Max. Duty Cycle | DMAX | 100 | % | VFB=0V | 5 |
CAD (KiCad official)
- Symbol:
XL4003E1 - Footprint:
Package_TO_SOT_SMD:TO-252-5_TabPin6 - 3D model: TO-252-5 (KiCad packages3D, STEP)
- 3D model files:
xl4003e1-etched.step/xl4003e1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xl4003e1.step/xl4003e1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XLSEMI datasheet (10 pp, sha256
d43184d7af2696e6, retrieved 2026-11-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# XL4003E1
**XLSEMI** · DC-DC Converters · TO-252-5
XL4003E1 from XLSEMI, in a TO-252-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin. Must be placed outside the Schottky diode-to-output-capacitor ground path to prevent switching current spikes from inducing voltage noise into the IC. |
| 2 | FB | input | Feedback pin. Senses the output voltage through an external resistor divider and regulates it. Internal feedback threshold voltage is 0.8V; Vout = 0.8 * (1 + R2/R1). |
| 3 | SW | passive | Power switch output pin. Switch node that supplies power to the external inductor / Schottky diode / output filter. The metal tab is electrically connected to SW. |
| 4 | EN | input | Enable pin with hysteresis and TTL-compatible shutdown. Drive high (>=1.4V) to turn on the regulator, drive low (<=0.8V) to turn it off. Shutdown supply current ~60uA typ. |
| 5 | VIN | power_in | Supply voltage input pin. Operates from 5V to 32V DC (absolute max 35V). Bypass to GND with a suitably large capacitor (e.g. 220uF/50V) to eliminate input noise. |
| 6 | SW | passive | Package tab (pad 6). printed: Metal Tab SW. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XLSEMI |
| Package | TO-252-5 |
| Category | PMIC |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | Vin | -0.3 | | 35 | V | | 4 |
| Feedback Pin Voltage | VFB | -0.3 | | | V | | 4 |
| EN Pin Voltage | VEN | -0.3 | | | V | | 4 |
| Output Switch Pin Voltage | VSW | -0.3 | | | V | | 4 |
| Operating Junction Temperature | TJ | -40 | | 125 | oC | | 4 |
| Storage Temperature | TSTG | -65 | | 150 | oC | | 4 |
| Lead Temperature | TLEAD | | | 260 | oC | Soldering, 10 sec | 4 |
| ESD (HBM) | | | | 2000 | V | HBM | 4 |
| Thermal Resistance (Junction to Ambient, No Heatsink, Free Air) | RJA | | 50 | | oC/W | TO252-5L, junction to ambient, no heatsink, free air | 4 |
| Feedback Voltage | VFB | 0.776 | 0.8 | 0.824 | V | Vin = 7V to 32V, Vout=5V; Iload=0.3A to 4A | 5 |
| Input operation voltage | Vin | 5 | | 32 | V | | 5 |
| Shutdown Supply Current | IS | | 60 | 200 | uA | VEN=0V | 5 |
| Quiescent Supply Current | Iq | | 3 | 5 | mA | VEN =2V, VFB =Vin | 5 |
| Oscillator Frequency | Fosc | 240 | 300 | 360 | Khz | | 5 |
| Switch Current Limit | IL | | 6 | | A | VFB =0V | 5 |
| EN Pin Threshold High (Regulator ON) | VEN | 1.4 | | | V | High (Regulator ON) | 5 |
| EN Pin Threshold Low (Regulator OFF) | VEN | | | 0.8 | V | Low (Regulator OFF) | 5 |
| EN Pin Input Leakage Current (ON) | IH | | 1 | 15 | uA | VEN =2V (ON) | 5 |
| EN Pin Input Leakage Current (OFF) | IL | | 1 | 15 | uA | VEN =0V (OFF) | 5 |
| Max. Duty Cycle | DMAX | | 100 | | % | VFB=0V | 5 |
## CAD (KiCad official)
- Symbol: `XL4003E1`
- Footprint: `Package_TO_SOT_SMD:TO-252-5_TabPin6`
- 3D model: TO-252-5 (KiCad packages3D, STEP)
- 3D model files: `xl4003e1-etched.step` / `xl4003e1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `xl4003e1.step` / `xl4003e1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [XLSEMI datasheet](docs/xl4003e1-datasheet.pdf) (10 pp, sha256 `d43184d7af2696e6`, retrieved 2026-11-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/xl4003e1-datasheet.pdf)