component
XL386-MS
Public Made by Adomby adom
XINLUDA Audio Amplifiers, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
XL386-MS
XINLUDA · Audio Amplifiers · MSOP-8
XL386-MS from XINLUDA, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GAIN | passive | Gain setting pin: with pins 1 and 8 open the internal 1.35 kΩ resistor sets the gain to 20 (26 dB), and an external RC between pins 1 and 8 can set the gain up to 200 (46 dB). |
| 2 | -INPUT | input | Inverting input, referenced to ground and biased to ground through an internal 50 kΩ resistor, with the unused input bypassed to ground when higher gains are used. |
| 3 | +INPUT | input | Noninverting input, referenced to ground and biased to ground through an internal 50 kΩ resistor. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | VOUT | output | Amplifier output, automatically biased to half the supply voltage; use short traces to the speaker connection. |
| 6 | VS | power_in | Power supply voltage, specified for 4 V to 12 V (absolute maximum 15 V), with a decoupling capacitor to GND placed close to the pin. |
| 7 | BYPASS | output | Bypass decoupling path for the internal bias node, where a 10 µF bypass capacitor is used in the PSRR specification. |
| 8 | GAIN | passive | Gain setting pin paired with pin 1: an external capacitor between pins 1 and 8 bypasses the internal 1.35 kΩ resistor to raise the gain to 200. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XINLUDA |
| Package | MSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Supply Voltage | VS | 4 | 12 | V | 5 | ||
| Quiescent Current | IQ | 5 | 12 | mA | VS = 6 V, VIN = 0 | 5 | |
| Output Power | POUT | 250 | 325 | mW | VS = 6 V, RL = 8 Ω, THD = 10% | 5 | |
| Supply Voltage | VCC | 4 | 12 | V | 4 | ||
| Speaker Impedance | 4 | Ω | 4 | ||||
| Analog input voltage | VI | -0.4 | 0.4 | V | 4 | ||
| Operating free-air temperature | TA | 0 | 70 | °C | 4 | ||
| Supply Voltage, VCC | VCC | 15 | V | 4 | |||
| Package Dissipation (XL386-MS) | 0.73 | W | 4 | ||||
| Input Voltage | VI | -0.4 | 0.4 | V | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Voltage Gain | AV | 26 | dB | VS = 6 V, f = 1 kHz | 5 | ||
| Voltage Gain (10 µF from Pin 1 to 8) | AV | 46 | dB | 10 µF from Pin 1 to 8 | 5 | ||
| Bandwidth | BW | 300 | kHz | VS = 6 V, Pins 1 and 8 Open | 5 | ||
| Total Harmonic Distortion | THD | 0.2 | % | VS = 6 V, RL = 8 Ω, POUT = 125 mW, f = 1 kHz, Pins 1 and 8 Open | 5 | ||
| Power Supply Rejection Ratio | PSRR | 50 | dB | VS = 6 V, f = 1 kHz, CBYPASS = 10 μF, Pins 1 and 8 Open, Referred to Output | 5 | ||
| Input Resistance | RIN | 50 | kΩ | 5 | |||
| Input Bias Current | IBIAS | 250 | nA | VS = 6 V, Pins 2 and 3 Open | 5 | ||
| Junction-to-ambient thermal resistance (MSOP8) | RθJA | 169.3 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance (MSOP8) | RθJC(top) | 73.1 | °C/W | 4 | |||
| Junction-to-board thermal resistance (MSOP8) | RθJB | 100.2 | °C/W | 4 | |||
| Junction-to-top characterization parameter (MSOP8) | ψJT | 9.2 | °C/W | 4 | |||
| Junction-to-board characterization parameter (MSOP8) | ψJB | 99.1 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
XL386-MS - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
xl386-ms-etched.step/xl386-ms-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xl386-ms.step/xl386-ms.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XINLUDA datasheet (20 pp, sha256
a32c9ef3eb884ccc, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# XL386-MS
**XINLUDA** · Audio Amplifiers · MSOP-8
XL386-MS from XINLUDA, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GAIN | passive | Gain setting pin: with pins 1 and 8 open the internal 1.35 kΩ resistor sets the gain to 20 (26 dB), and an external RC between pins 1 and 8 can set the gain up to 200 (46 dB). |
| 2 | -INPUT | input | Inverting input, referenced to ground and biased to ground through an internal 50 kΩ resistor, with the unused input bypassed to ground when higher gains are used. |
| 3 | +INPUT | input | Noninverting input, referenced to ground and biased to ground through an internal 50 kΩ resistor. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | VOUT | output | Amplifier output, automatically biased to half the supply voltage; use short traces to the speaker connection. |
| 6 | VS | power_in | Power supply voltage, specified for 4 V to 12 V (absolute maximum 15 V), with a decoupling capacitor to GND placed close to the pin. |
| 7 | BYPASS | output | Bypass decoupling path for the internal bias node, where a 10 µF bypass capacitor is used in the PSRR specification. |
| 8 | GAIN | passive | Gain setting pin paired with pin 1: an external capacitor between pins 1 and 8 bypasses the internal 1.35 kΩ resistor to raise the gain to 200. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XINLUDA |
| Package | MSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Supply Voltage | VS | 4 | | 12 | V | | 5 |
| Quiescent Current | IQ | | 5 | 12 | mA | VS = 6 V, VIN = 0 | 5 |
| Output Power | POUT | 250 | 325 | | mW | VS = 6 V, RL = 8 Ω, THD = 10% | 5 |
| Supply Voltage | VCC | 4 | | 12 | V | | 4 |
| Speaker Impedance | | 4 | | | Ω | | 4 |
| Analog input voltage | VI | -0.4 | | 0.4 | V | | 4 |
| Operating free-air temperature | TA | 0 | | 70 | °C | | 4 |
| Supply Voltage, VCC | VCC | | | 15 | V | | 4 |
| Package Dissipation (XL386-MS) | | | | 0.73 | W | | 4 |
| Input Voltage | VI | -0.4 | | 0.4 | V | | 4 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |
| Voltage Gain | AV | | 26 | | dB | VS = 6 V, f = 1 kHz | 5 |
| Voltage Gain (10 µF from Pin 1 to 8) | AV | | 46 | | dB | 10 µF from Pin 1 to 8 | 5 |
| Bandwidth | BW | | 300 | | kHz | VS = 6 V, Pins 1 and 8 Open | 5 |
| Total Harmonic Distortion | THD | | 0.2 | | % | VS = 6 V, RL = 8 Ω, POUT = 125 mW, f = 1 kHz, Pins 1 and 8 Open | 5 |
| Power Supply Rejection Ratio | PSRR | | 50 | | dB | VS = 6 V, f = 1 kHz, CBYPASS = 10 μF, Pins 1 and 8 Open, Referred to Output | 5 |
| Input Resistance | RIN | | 50 | | kΩ | | 5 |
| Input Bias Current | IBIAS | | 250 | | nA | VS = 6 V, Pins 2 and 3 Open | 5 |
| Junction-to-ambient thermal resistance (MSOP8) | RθJA | | 169.3 | | °C/W | | 4 |
| Junction-to-case (top) thermal resistance (MSOP8) | RθJC(top) | | 73.1 | | °C/W | | 4 |
| Junction-to-board thermal resistance (MSOP8) | RθJB | | 100.2 | | °C/W | | 4 |
| Junction-to-top characterization parameter (MSOP8) | ψJT | | 9.2 | | °C/W | | 4 |
| Junction-to-board characterization parameter (MSOP8) | ψJB | | 99.1 | | °C/W | | 4 |
## CAD (KiCad official)
- Symbol: `XL386-MS`
- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`
- 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files: `xl386-ms-etched.step` / `xl386-ms-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `xl386-ms.step` / `xl386-ms.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [XINLUDA datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588914133702496257) (20 pp, sha256 `a32c9ef3eb884ccc`, retrieved 2026-10-18, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/xl386-ms-datasheet.pdf)