component
XL33035
Public Made by Adomby adom
XINLUDA Brushless DC (BLDC) Motor Driver, SOIC-24-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
xl33035: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
a589264
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271
{
"slug": "xl33035",
"version": "0.1.0",
"type": "component",
"description": "XINLUDA Brushless DC (BLDC) Motor Driver, SOIC-24-300mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"motor driver ics",
"xl33035",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"xl33035.kicad_sym",
"xl33035.kicad_mod",
"xl33035.glb",
"xl33035.step",
"xl33035.lbr",
"docs/hero.png",
"docs/xl33035-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html"
],
"component": {
"mpn": "XL33035",
"manufacturer": "XINLUDA",
"package": "SOIC-24-300mil",
"pin_count": 24,
"category": "Motor Driver ICs",
"subcategory": "Brushless DC (BLDC) Motor Driver",
"datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588930807431352320",
"parts": {
"symbol": "xl33035.kicad_sym",
"footprint": "xl33035.kicad_mod",
"model_3d": "xl33035-etched.glb",
"model_3d_plain": "xl33035.glb",
"model_3d_step": "xl33035-etched.step",
"model_3d_step_plain": "xl33035.step",
"lbr": "xl33035.lbr"
},
"distributor_links": {
"lcsc": "C609781"
},
"pins": [
{
"number": "1",
"name": "BT",
"type": "output",
"description": "Open collector top drive output for upper power switch transistors, capable of sinking 50 mA with minimum 30 V breakdown voltage."
},
{
"number": "2",
"name": "AT",
"type": "output",
"description": "Open collector top drive output for upper power switch transistors, capable of sinking 50 mA with minimum 30 V breakdown voltage."
},
{
"number": "3",
"name": "Fwd/Rev",
"type": "input",
"description": "Forward/Reverse input to control motor rotation direction, TTL compatible with threshold typically at 2.2 V."
},
{
"number": "4",
"name": "SA",
"type": "input",
"description": "Sensor input for rotor position decoder, TTL compatible with internal pull-up resistors, designed for Hall Effect or opto-slotted coupler interface."
},
{
"number": "5",
"name": "SB",
"type": "input",
"description": "Sensor input for rotor position decoder, TTL compatible with internal pull-up resistors, designed for Hall Effect or opto-slotted coupler interface."
},
{
"number": "6",
"name": "SC",
"type": "input",
"description": "Sensor input for rotor position decoder, TTL compatible with internal pull-up resistors, designed for Hall Effect or opto-slotted coupler interface."
},
{
"number": "7",
"name": "Output Enable",
"type": "input",
"description": "Logic high enables motor operation and drive output sequencing; logic low causes motor coast and Fault output activation, with internal 25 µA pull-up when left disconnected."
},
{
"number": "8",
"name": "Reference Output",
"type": "output",
"description": "Temperature compensated 6.25 V reference output providing charging current for oscillator timing capacitor and up to 20 mA for external sensors, with output voltage range of 5.9-6.5 V."
},
{
"number": "9",
"name": "Current Sense Noninverting Input",
"type": "input",
"description": "Analog input for cycle-by-cycle current limiting with 100 mV threshold relative to Pin 15, typically connected to top side of current sense resistor."
},
{
"number": "10",
"name": "Oscillator",
"type": "output",
"description": "Oscillator timing capacitor connection generating ramp signal from 1.5 V to 4.1 V, programmed by external resistor RT and capacitor CT for 20-30 kHz typical operation."
},
{
"number": "11",
"name": "Error Amp Noninverting Input",
"type": "input",
"description": "Error amplifier noninverting input with input common mode range from 0 to Vref, typically connected to speed set potentiometer, with typical DC voltage gain of 80 dB."
},
{
"number": "12",
"name": "Error Amp Inverting Input",
"type": "input",
"description": "Error amplifier inverting input with input common mode range from 0 to Vref, typically connected to error amplifier output for unity-gain feedback configuration in open loop applications."
},
{
"number": "13",
"name": "Error Amp Out/PWM Input",
"type": "output",
"description": "Error amplifier output with 70-80 dB open loop gain and 4.6-5.3 V high state, providing PWM reference for internal comparator and available for closed-loop compensation."
},
{
"number": "14",
"name": "Fault Output",
"type": "output",
"description": "Open collector fault output active low during invalid sensor input, output enable at logic 0, current sense exceeding 100 mV, undervoltage lockout, or thermal shutdown conditions, with 16 mA sink capability."
},
{
"number": "15",
"name": "Current Sense Inverting Input",
"type": "input",
"description": "Reference input for current sense comparator establishing internal 100 mV threshold with respect to Pin 9, typically connected to bottom side of current sense resistor."
},
{
"number": "16",
"name": "Gnd",
"type": "power_in",
"description": "Control circuit ground and reference point, must return separately to power source ground for proper noise immunity and accuracy."
},
{
"number": "17",
"name": "VCC",
"type": "power_in",
"description": "Positive power supply for control IC operational over 10-30 V range, with typical quiescent current of 12-16 mA at VCC = VC = 20 V."
},
{
"number": "18",
"name": "VC",
"type": "power_in",
"description": "Positive supply voltage for bottom drive outputs setting high state output voltage, operational over 10-30 V range independent of VCC for design flexibility, with typical supply current of 3.5-6.0 mA."
},
{
"number": "19",
"name": "CB",
"type": "output",
"description": "Totem pole bottom drive output capable of sourcing and sinking 100 mA from VC supply, designed for direct N-channel MOSFET or NPN transistor drive with rise/fall times of 38-200 ns."
},
{
"number": "20",
"name": "BB",
"type": "output",
"description": "Totem pole bottom drive output capable of sourcing and sinking 100 mA from VC supply, designed for direct N-channel MOSFET or NPN transistor drive with rise/fall times of 38-200 ns."
},
{
"number": "21",
"name": "AB",
"type": "output",
"description": "Totem pole bottom drive output capable of sourcing and sinking 100 mA from VC supply, designed for direct N-channel MOSFET or NPN transistor drive with rise/fall times of 38-200 ns."
},
{
"number": "22",
"name": "60°/120° Select",
"type": "input",
"description": "Configuration input for sensor electrical phasing, high state (1) selects 60° or 300° phasing while low state (0) selects 120° or 240° phasing, TTL compatible."
},
{
"number": "23",
"name": "Brake",
"type": "input",
"description": "Brake input with logic low enabling normal motor operation and high state commanding rapid motor deceleration, with internal 40 kΩ pull-up resistor and unconditional priority over all control inputs."
},
{
"number": "24",
"name": "CT",
"type": "output",
"description": "Open collector top drive output for upper power switch transistors, capable of sinking 50 mA with minimum 30 V breakdown voltage."
}
],
"provenance": {
"extractor": "extract_pins 0.2",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.2",
"primary_model": "claude-haiku-4-5-20251001",
"primary_mode": "text",
"consensus_model": "claude-sonnet-4-6",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [],
"pages_sent": 34,
"cost_usd": 0.314,
"at": "2026-09-22T05:18:22"
},
"datasheet": {
"url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588930807431352320",
"pages": 34,
"sha256": "adea8d9294f4f33c",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 24,
"described": 24,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "xl33035.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
10.3,
15.4,
2.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "4b0d20f82f5b0124fecfe11c941274a3c865a30f7baee8b8fadd7df55972d4cd",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "xl33035-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
10.3,
15.4,
2.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "8fafd89dee10c721436db10a1e3b1c59b4eaad69f3534284a117bb1943454f37",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}