component
XL3001A
Public Made by Adomby adom
XLSEMI LED Drivers, SOP-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 5d ago |
| viewers | 5d ago |
| package.json | 5d ago |
| page.json | 5d ago |
| README.md | 5d ago |
| xl3001a-etched.glb | 5d ago |
| xl3001a-etched.step | 5d ago |
| xl3001a-hero.glb | 5d ago |
| xl3001a-hero.overlay.json | 5d ago |
| xl3001a.glb | 5d ago |
| xl3001a.kicad_mod | 5d ago |
| xl3001a.kicad_sym | 5d ago |
| xl3001a.lbr | 5d ago |
| xl3001a.step | 5d ago |
XL3001A
XLSEMI · LED Drivers · SOP-8-EP
XL3001A from XLSEMI, in a SOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS | input | Output current sampling pin; the CS reference voltage is 0.21V, and the LED current is set as IOUT = 0.21/RCS. |
| 2 | NC | unconnected | No internal connection. |
| 3 | VC | power_out | Internal voltage regulator bypass pin; a 1uF capacitor must be connected between the VIN and VC pins. |
| 4 | VIN | power_in | Power input supporting a wide DC 8V to 45V operating range (absolute maximum VIN is -0.3 to 50V); a capacitor must be connected in parallel between VIN and GND to eliminate noise. |
| 5 | SW | output | Power switch output pin and the switching node of the output power stage; pin 5 and pin 6 are both SW. |
| 6 | SW | output | Power switch output pin and the switching node of the output power stage; pin 6 is connected internally to pin 5 as SW. |
| 7 | GND | power_in | Ground pin; pins 7 and 8 are both GND. |
| 8 | GND | power_in | Ground pin; pin 8 is paired with pin 7 as GND. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XLSEMI |
| Package | SOP-8-EP |
| Category | LED Drivers |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| CS voltage (current-sense accuracy, 电流采样电压精度) | -3 | 3 | % | 1 | |||
| CS voltage | VCS | 203.7 | 210 | 216.3 | mV | VIN =12V，VOUT =3.3V IOUT =0.3A | 4 |
| Operating voltage (工作电压) | VIN | 8 | 45 | V | 4 | ||
| Oscillator frequency (振荡频率) | FOSC | 198 | 220 | 242 | KHz | 4 | |
| Quiescent supply current (静态电源电流) | IQ | 1.9 | 5 | mA | VCS=2V | 4 | |
| Input undervoltage lockout (输入欠压保护) | VIN_UVLO | 5 | V | 4 | |||
| Switch current limit (开关电流限值) | IL | 4 | A | VCS=0V | 4 | ||
| MOS on-resistance (MOS导通电阻) | RDS(ON) | 120 | mΩ | VCS=0V，ISW=3A | 4 | ||
| Thermal shutdown temperature (热关断温度) | TSD | 170 | ℃ | 4 | |||
| Thermal shutdown hysteresis (热关断迟滞) | TD | 20 | ℃ | 4 | |||
| Maximum duty cycle (最大占空比) | DMAX | 100 | % | VCS=0V | 4 | ||
| Input voltage (absolute maximum) | VIN | -0.3 | 50 | V | 3 | ||
| Internal regulator bypass pin voltage (absolute maximum) | VC | -0.3 | V | upper limit printed as VIN | 3 | ||
| Output switch pin voltage (absolute maximum) | VSW | -0.3 | V | upper limit printed as VIN | 3 | ||
| Current sense pin voltage (absolute maximum) | VCS | -0.3 | 7 | V | 3 | ||
| Operating junction temperature (操作结温) | TJ | -40 | 150 | ℃ | 3 | ||
| Storage temperature range (贮存温度范围) | TSTG | -65 | 150 | ℃ | 3 | ||
| Lead temperature (引脚温度) | TLEAD | 260 | ℃ | 焊接10秒 (soldering 10 s) | 3 | ||
| ESD human body model (人体模型) | 4000 | V | HBM; datasheet prints >4000 | 3 | |||
| Thermal resistance junction-to-ambient (热阻 SOP8-EP) | RJA | 60 | ℃/W | 结到环境，无外部散热片 | 3 |
CAD (KiCad official)
- Symbol:
XL3001A - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm - 3D model: SOP-8-EP (KiCad packages3D, STEP)
- 3D model files:
xl3001a-etched.step/xl3001a-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xl3001a.step/xl3001a.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XLSEMI datasheet (16 pp, sha256
a7a39fe5354fc9fa, retrieved 2026-10-21, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).