component
XL293D-8
Public Made by Adomby adom
XINLUDA Comparators, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 8d ago |
| viewers | 8d ago |
| package.json | 8d ago |
| page.json | 8d ago |
| README.md | 8d ago |
| xl293d-8-etched.glb | 8d ago |
| xl293d-8-etched.step | 8d ago |
| xl293d-8-hero.glb | 8d ago |
| xl293d-8-hero.overlay.json | 8d ago |
| xl293d-8.glb | 8d ago |
| xl293d-8.kicad_mod | 8d ago |
| xl293d-8.kicad_sym | 8d ago |
| xl293d-8.lbr | 8d ago |
| xl293d-8.step | 8d ago |
XL293D-8
XINLUDA · Comparators · SOIC-8
XL293D-8 from XINLUDA, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Output pin of comparator 1; it is an open-drain output that can be wired-AND with other open-collector outputs. |
| 2 | 1IN- | input | Negative input pin of comparator 1; the common-mode range at the inverting input tops out at Vcc - 1.5 V (Vcc - 2 V over full temperature range). |
| 3 | 1IN+ | input | Positive input pin of comparator 1; this input can exceed the Vcc level and either input can go to 30 V without damage. |
| 4 | GND | power_in | Ground pin; the voltage at either input must not go negative by more than 0.3 V with respect to network ground. |
| 5 | 2IN+ | input | Positive input pin of comparator 2; this input can exceed the Vcc level and either input can go to 30 V without damage. |
| 6 | 2IN- | input | Negative input pin of comparator 2; the common-mode range at the inverting input tops out at Vcc - 1.5 V (Vcc - 2 V over full temperature range). |
| 7 | 2OUT | output | Output pin of comparator 2; it is an open-drain output that can be wired-AND with other open-collector outputs. |
| 8 | VCC | power_in | Supply pin; the recommended supply range for non-V devices such as XL293D-8 is 2 V to 30 V (absolute maximum 36 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XINLUDA |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VCC | 36 | V | 4 | |||
| Differential input voltage | VID | -36 | 36 | V | Differential voltages are at IN+ with respect to IN- | 4 | |
| Input pin voltage range | VIN | -0.3 | 36 | V | 4 | ||
| Output pin voltage range | VO | 36 | V | 4 | |||
| Output current | IO | 20 | mA | 4 | |||
| Operating virtual-junction temperature | Tj | 300 | °C | 4 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 4 | ||
| Supply voltage (non-V devices) | VCC | 2 | 30 | V | Non-V devices; over operating free-air temperature range | 4 | |
| Junction temperature | Tj | -40 | 125 | °C | Over operating free-air temperature range | 4 | |
| Input offset voltage | VIO | 2 | 5 | mV | Vcc = 5 V to 30 V, 25°C | 5 | |
| Input offset voltage | VIO | 9 | mV | Vic = VICR min, Vo = 1.4 V; Full range | 5 | ||
| Input offset current | IIO | 5 | 50 | nA | Vo = 1.4 V, 25°C | 5 | |
| Input offset current | IIO | 250 | nA | Vo = 1.4 V; Full range | 5 | ||
| Input bias current | IIB | -25 | -250 | nA | Vo = 1.4 V, 25°C | 5 | |
| Input bias current | IIB | -400 | nA | Vo = 1.4 V; Full range | 5 | ||
| Common-mode input-voltage range | VICR | 0 | V | 25°C; upper limit printed as Vcc -1.5 V | 5 | ||
| Large-signal differential-voltage amplification | AVD | 50 | 200 | V/mV | VCC = 15 V, Vo = 1.4 V to 11.4 V, RL ≥ 15 kΩ to Vcc, 25°C | 5 | |
| High-level output current | IOH | 0.1 | 50 | nA | VOH = 5 V, VID = 1 V, 25°C | 5 | |
| High-level output current | IOH | 1 | PA | VOH = 30 V, VID = 1 V; Full range | 5 | ||
| Low-level output voltage | VOL | 150 | 400 | mV | IOL = 4 mA, VID = -1 V, 25°C | 5 | |
| Low-level output voltage | VOL | 700 | mV | IOL = 4 mA, VID = -1 V; Full range | 5 | ||
| Low-level output current | IOL | 6 | mA | VOL = 1.5 V, VID = -1 V, 25°C | 5 | ||
| Supply current | Icc | 0.8 | 1 | mA | RL = ∞, Vcc = 5 V, 25°C | 5 | |
| Supply current | Icc | 2.5 | mA | RL = ∞, Vcc = 30 V; Full range | 5 | ||
| Response time | 1.3 | µs | Vcc = 5 V, TA = 25°C; Ri connected to 5 V through 5.1 kΩ, CL = 15 pF; 100-mV input step with 5-mV overdrive | 7 | |||
| Response time | 0.3 | µs | Vcc = 5 V, TA = 25°C; Ri connected to 5 V through 5.1 kΩ, CL = 15 pF; TTL-level input step | 7 | |||
| Junction-to-ambient thermal resistance (SOP 8 pins) | RθJA | 97 | °C/W | SOP 8 pins | 4 |
CAD (KiCad official)
- Symbol:
XL293D-8 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
xl293d-8-etched.step/xl293d-8-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xl293d-8.step/xl293d-8.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XINLUDA datasheet (16 pp, sha256
a26f77a27e4aad48, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).