component
XL293-KR
Public Made by Adomby adom
XINLUDA Operational Amplifier, VSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 10d ago |
| viewers | 10d ago |
| package.json | 10d ago |
| page.json | 10d ago |
| README.md | 10d ago |
| xl293-kr-etched.glb | 10d ago |
| xl293-kr-etched.step | 10d ago |
| xl293-kr-hero.glb | 10d ago |
| xl293-kr-hero.overlay.json | 10d ago |
| xl293-kr.glb | 10d ago |
| xl293-kr.kicad_mod | 10d ago |
| xl293-kr.kicad_sym | 10d ago |
| xl293-kr.lbr | 10d ago |
| xl293-kr.step | 10d ago |
XL293-KR
XINLUDA · Operational Amplifier · VSSOP-8
XL293-KR from XINLUDA, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Open-drain NPN output of comparator 1 that sinks current when 1IN+ is higher than 1IN-, with output pin voltage limited to -0.3 V to 36 V and an unlimited duration output short circuit to ground. |
| 2 | 1IN- | input | Inverting input of comparator 1, whose recommended input voltage range is 0 to VCC-2 V and which should not be driven more than 0.3 V below ground. |
| 3 | 1IN+ | input | Non-inverting input of comparator 1, whose recommended input voltage range is 0 to VCC-2 V and which should not be driven more than 0.3 V below ground. |
| 4 | GND | power_in | Ground reference pin; all voltages are referenced to network ground. |
| 5 | 2IN+ | input | Non-inverting input of comparator 2, whose recommended input voltage range is 0 to VCC-2 V and which should not be driven more than 0.3 V below ground. |
| 6 | 2IN- | input | Inverting input of comparator 2, whose recommended input voltage range is 0 to VCC-2 V and which should not be driven more than 0.3 V below ground. |
| 7 | 2OUT | output | Open-drain NPN output of comparator 2 that sinks current when 2IN+ is higher than 2IN-, with output pin voltage limited to -0.3 V to 36 V and an unlimited duration output short circuit to ground. |
| 8 | VCC | power_in | Supply pin with a recommended supply range of 2 V to 30 V and an absolute maximum of 36 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XINLUDA |
| Package | VSSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage (25°C) | VIO | 3 | 8 | mV | Vcc = 5 V to 30 V, Vic = VICR min, Vo = 1.4 V, 25°C | 5 | |
| Input offset voltage (full range) | VIO | 10 | mV | Vcc = 5 V to 30 V, Vic = VICR min, Vo = 1.4 V, full range | 5 | ||
| Input offset current (25°C) | IIO | 7 | 100 | nA | Vo = 1.4 V, 25°C | 5 | |
| Input offset current (full range) | IIO | 300 | nA | Vo = 1.4 V, full range | 5 | ||
| Input bias current (25°C) | IIB | -30 | -300 | nA | Vo = 1.4 V, 25°C | 5 | |
| Input bias current (full range) | IIB | -500 | nA | Vo = 1.4 V, full range | 5 | ||
| Common-mode input-voltage range (25°C), lower limit | VICR | 0 | V | 25°C; upper limit printed as Vcc - 1.5 | 5 | ||
| Common-mode input-voltage range (full range), lower limit | VICR | 0 | V | full range; upper limit printed as Vcc - 2 | 5 | ||
| Large-signal differential-voltage amplification (25°C) | AVD | 50 | 200 | V/mV | Vcc = 15 V, Vo = 1.4 V to 11.4 V, RL ≥ 15 kΩ to Vcc, 25°C | 5 | |
| High-level output current (25°C) | IOH | 0.3 | 90 | nA | VOH = 5 V, VID = 1 V, 25°C | 5 | |
| High-level output current (full range) | IOH | 2 | uA | VOH = 30 V, VID = 1 V, full range | 5 | ||
| Low-level output voltage (25°C) | VOL | 150 | 450 | mV | IOL = 4 mA, VID = -1 V, 25°C | 5 | |
| Low-level output voltage (full range) | VOL | 750 | mV | IOL = 4 mA, VID = -1 V, full range | 5 | ||
| Low-level output current | IOL | 3 | mA | VOL = 1.5 V, VID = -1 V, 25°C | 5 | ||
| Supply current (25°C) | ICC | 0.8 | 2 | mA | RL = ∞, Vcc = 5 V, 25°C | 5 | |
| Supply current (full range) | ICC | 5 | mA | RL = ∞, Vcc = 30 V, full range | 5 | ||
| Supply voltage range | VCC | -0.3 | 36 | V | Over operating free-air temperature range | 4 | |
| Differential input voltage | VID | -36 | 36 | V | Differential voltage at IN+ with respect to IN- | 4 | |
| Input pin voltage range | VIN | -0.3 | 36 | V | Over operating free-air temperature range | 4 | |
| Output pin voltage range | VO | -0.3 | 36 | V | Over operating free-air temperature range | 4 | |
| Output current | IO | 18 | mA | 4 | |||
| Operating virtual-junction temperature | Tj | 150 | ℃ | 4 | |||
| Storage temperature range | Tstg | -50 | 150 | ℃ | 4 | ||
| Electrostatic discharge, Human Body Model | VESD | 0 | 1000 | V | HBM, per ANSI/ESDA/JEDEC JS-001 | 4 | |
| Electrostatic discharge, Charged Device Model | VESD | 0 | 500 | V | CDM, per JEDEC JESD22-C101 | 4 | |
| Supply voltage range (Vs = VCC - GND) | Vs | 2 | 30 | V | Over operating free-air temperature range | 4 | |
| Input pin voltage range | 0 | V | Upper limit printed as VCC - 2 V | 4 | |||
| Ambient temperature, TA (293) | TA | -25 | 85 | °C | 4 | ||
| Junction-to-ambient thermal resistance, VSSOP8 | RSJA | 210 | °c/w | VSSOP8 package, typical value | 4 | ||
| Junction-to-case (top) thermal resistance, VSSOP8 | Rejc(top) | 102 | °c/w | VSSOP8 package, typical value | 4 |
CAD (KiCad official)
- Symbol:
XL293-KR - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
xl293-kr-etched.step/xl293-kr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xl293-kr.step/xl293-kr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XINLUDA datasheet (12 pp, sha256
684d00669bcd787d, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).