component
XL2904-KR
Public Made by Adomby adom
XINLUDA Operational Amplifier, VSSOP-8. Pinout reviewed by a person against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownXL2904-KR
XINLUDA · Operational Amplifier · VSSOP-8
XL2904-KR from XINLUDA, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Output A | output | Output of amplifier A, short-circuit protected, with output range including the negative supply. |
| 2 | Inputs A (-) | input | Inverting input of amplifier A; input voltage should not go more than 0.3 V below VEE/GND. |
| 3 | Inputs A (+) | input | Non-inverting input of amplifier A; common mode range extends from 0 V (VEE/GND) to VCC - 1.7 V. |
| 4 | VEE/Gnd | power_in | Negative supply or ground pin for single or split supply operation. |
| 5 | Inputs B (+) | input | Non-inverting input of amplifier B; common mode range extends from 0 V (VEE/GND) to VCC - 1.7 V. |
| 6 | Inputs B (-) | input | Inverting input of amplifier B; input voltage should not go more than 0.3 V below VEE/GND. |
| 7 | Output B | output | Output of amplifier B, short-circuit protected, with output range including the negative supply. |
| 8 | VCC | power_in | Positive supply, 3.0 V to 32 V single supply (absolute max 32 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XINLUDA |
| Package | VSSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage (TA = 25C) | VIO | 2 | 7 | mV | VCC = 5.0 V to 30 V, VIC = 0 V to VCC −1.7 V, VO = 1.4 V, RS = 0 Ω; TA = 25C | 5 | |
| Input Offset Voltage (TA = Thigh) | VIO | 10 | mV | VCC = 5.0 V to 30 V, VIC = 0 V to VCC −1.7 V, VO = 1.4 V, RS = 0 Ω; TA = Thigh (Note 8) | 5 | ||
| Input Offset Voltage (TA = Tlow) | VIO | 10 | mV | VCC = 5.0 V to 30 V, VIC = 0 V to VCC −1.7 V, VO = 1.4 V, RS = 0 Ω; TA = Tlow (Note 8) | 5 | ||
| Input Offset Current (TA = 25C) | IIO | 5 | 50 | nA | TA = 25C | 5 | |
| Input Offset Current (TA = Thigh to Tlow) | IIO | 45 | 200 | nA | TA = Thigh to Tlow (Note 8) | 5 | |
| Input Bias Current (TA = 25C) | IIB | -45 | -250 | nA | TA = 25C | 5 | |
| Input Bias Current (TA = Thigh to Tlow) | IIB | -50 | -500 | nA | TA = Thigh to Tlow (Note 8) | 5 | |
| Input Common Mode Voltage Range (TA = 25C) | VICR | 0 | 28.3 | V | VCC = 30 V | 5 | |
| Input Common Mode Voltage Range (TA = Thigh to Tlow) | VICR | 0 | 28 | V | VCC = 30 V, TA = Thigh to Tlow (Note 8) | 5 | |
| Large Signal Open Loop Voltage Gain (TA = 25C) | AVOL | 25 | 100 | V/mV | RL = 2.0 kΩ, VCC = 15 V, for large VO swing; TA = 25C | 5 | |
| Large Signal Open Loop Voltage Gain (TA = Thigh to Tlow) | AVOL | 15 | V/mV | RL = 2.0 kΩ, VCC = 15 V, for large VO swing; TA = Thigh to Tlow (Note 8) | 5 | ||
| Common Mode Rejection | CMR | 50 | 70 | dB | RS ≤ 10 kΩ | 5 | |
| Power Supply Rejection | PSR | 50 | 100 | dB | 5 | ||
| Output Voltage-High (5 V supply) | VOH | 3.3 | 3.5 | V | VCC = 5.0 V, RL = 2.0 kΩ, TA = 25C | 5 | |
| Output Voltage-High (30 V supply, 2 kΩ load) | VOH | 26 | V | VCC = 30 V, RL = 2.0 kΩ | 5 | ||
| Output Voltage-High (30 V supply, 10 kΩ load) | VOH | 27 | 28 | V | VCC = 30 V, RL = 10 kΩ | 5 | |
| Output Voltage-Low | VOL | 5 | 20 | mV | VCC = 5.0 V, RL = 10 kΩ, TA = Thigh to Tlow (Note 8) | 5 | |
| Output Source Current | IO+ | 20 | 40 | mA | VID = +1.0 V, VCC = 15 V | 5 | |
| Output Sink Current (VID = -1 V row) | IO− | 10 | 20 | mA | VID = −1.0 V, VCC = 15 V | 5 | |
| Output Short Circuit to Ground | ISC | 40 | 60 | mA | 5 | ||
| Power Supply Current (Total Device, 30 V) | ICC | 1.5 | 3 | mA | VCC = 30 V, VO = 0 V; TA = Thigh to Tlow (Note 8) | 5 | |
| Power Supply Current (Total Device, 5 V) | ICC | 0.7 | 1.2 | mA | VCC = 5 V, VO = 0 V; TA = Thigh to Tlow (Note 8) | 5 | |
| Power Supply Voltage (single supply) | VCC | 32 | Vdc | Single supply | 3 | ||
| Power Supply Voltage (split supplies) | VCC, VEE | 16 | Vdc | Split supplies | 3 | ||
| Input Differential Voltage Range | VIDR | 32 | Vdc | 3 | |||
| Input Common Mode Voltage Range | VICR | -0.3 | 32 | Vdc | Note 2: for supply voltages less than 32 V, absolute maximum input voltage equals supply voltage | 3 | |
| Junction Temperature | TJ | 150 | C | 3 | |||
| Storage Temperature Range | Tstg | -65 | 150 | C | 3 | ||
| ESD Protection, Human Body Model | Vesd | 2000 | V | Human Body Model | 3 | ||
| ESD Protection, Machine Model | Vesd | 200 | V | Machine Model | 3 | ||
| Operating Ambient Temperature Range (2904) | TA | -40 | 85 | C | 2904 column | 3 | |
| Thermal Resistance, Junction-to-Air | RθJA | 238 | C/W | Case 846A (Note 3): evaluation board, 1 oz copper, minimum pad size, all outputs active | 3 |
CAD (KiCad official)
- Symbol:
XL2904-KR - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
xl2904-kr-etched.step/xl2904-kr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xl2904-kr.step/xl2904-kr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XINLUDA datasheet (13 pp, sha256
76099ff2d7c2c408, retrieved 2026-10-21, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).