component
XL2903-TS
Public Made by Adomby adom
XINLUDA Operational Amplifier, TSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 6d ago |
| viewers | 6d ago |
| package.json | 6d ago |
| page.json | 6d ago |
| README.md | 6d ago |
| xl2903-ts-etched.glb | 6d ago |
| xl2903-ts-etched.step | 6d ago |
| xl2903-ts-hero.glb | 6d ago |
| xl2903-ts-hero.overlay.json | 6d ago |
| xl2903-ts.glb | 6d ago |
| xl2903-ts.kicad_mod | 6d ago |
| xl2903-ts.kicad_sym | 6d ago |
| xl2903-ts.lbr | 6d ago |
| xl2903-ts.step | 6d ago |
XL2903-TS
XINLUDA · Operational Amplifier · TSSOP-8
XL2903-TS from XINLUDA, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Open-drain NPN output of comparator 1 that sinks current when 1IN+ is higher than 1IN- plus the offset voltage; absolute maximum output current is 18 mA, output pin voltage range is -0.3 V to 36 V, and output short to ground is unlimited. |
| 2 | 1IN- | input | Inverting (negative) input of comparator 1; the voltage must not go below -0.3 V, the absolute input pin range is -0.3 V to 36 V, and the common-mode range is 0 to VCC-1.5 V at 25 °C (0 to VCC-2 V over full temperature range). |
| 3 | 1IN+ | input | Non-inverting (positive) input of comparator 1; the voltage must not go below -0.3 V, the absolute input pin range is -0.3 V to 36 V, and the common-mode range is 0 to VCC-1.5 V at 25 °C (0 to VCC-2 V over full temperature range). |
| 4 | GND | power_in | Ground reference pin; all voltages on the device are referenced to network ground. |
| 5 | 2IN+ | input | Non-inverting (positive) input of comparator 2; the voltage must not go below -0.3 V, the absolute input pin range is -0.3 V to 36 V, and the common-mode range is 0 to VCC-1.5 V at 25 °C (0 to VCC-2 V over full temperature range). |
| 6 | 2IN- | input | Inverting (negative) input of comparator 2; the voltage must not go below -0.3 V, the absolute input pin range is -0.3 V to 36 V, and the common-mode range is 0 to VCC-1.5 V at 25 °C (0 to VCC-2 V over full temperature range). |
| 7 | 2OUT | output | Open-drain NPN output of comparator 2 that sinks current when 2IN+ is higher than 2IN- plus the offset voltage; absolute maximum output current is 18 mA, output pin voltage range is -0.3 V to 36 V, and output short to ground is unlimited. |
| 8 | VCC | power_in | Supply pin; recommended supply range is 2 V to 30 V (absolute maximum 36 V), and the device also supports dual supplies of ±18 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XINLUDA |
| Package | TSSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VID | 6 | 15 | mV | 25°C; Vcc = 5 V to MAX, Vic = VICR min, Vo = 1.4 V | 6 | |
| Input offset voltage | VID | 20 | mV | Full range; Vcc = 5 V to MAX, Vic = VICR min, Vo = 1.4 V | 6 | ||
| Input offset current | IIO | 18 | 130 | nA | 25°C; Vo = 1.4 V | 6 | |
| Input offset current | IIO | 360 | nA | Full range; Vo = 1.4 V | 6 | ||
| Input bias current | IIB | -400 | -45 | nA | 25°C; Vo = 1.4 V | 6 | |
| Input bias current | IIB | -600 | nA | Full range; Vo = 1.4 V | 6 | ||
| Common-mode input-voltage range | VICR | 0 | V | 25°C; upper limit printed as Vcc − 1.5 V (not numeric) | 6 | ||
| Large-signal differential-voltage amplification | AVD | 50 | 200 | V/mV | 25°C; Vcc = 15 V, Vo = 1.4 V to 11.4 V, RL ≥ 15 kΩ to Vcc | 6 | |
| High-level output current | IOH | 0.7 | 120 | nA | 25°C; VOH = 5 V, VID = 1 V | 6 | |
| High-level output current | IOH | 5 | uA | Full range; VOH = Vcc MAX (30 V), VID = 1 V | 6 | ||
| Low-level output voltage | VOL | 200 | 500 | mV | 25°C; IOL = 4 mA, VID = -1 V | 6 | |
| Low-level output voltage | VOL | 800 | mV | Full range; IOL = 4 mA, VID = -1 V | 6 | ||
| Low-level output current | IOL | 3 | mA | 25°C; VO = 1.5 V, VID = -1 V | 6 | ||
| Supply current | ICC | 1.1 | 3 | mA | 25°C; RL = ∞, Vcc = 5 V | 6 | |
| Supply current | ICC | 8 | mA | Full range; RL = ∞, Vcc = MAX (30 V) | 6 | ||
| Supply voltage range | VCC | -0.3 | 36 | V | Absolute maximum rating, over operating free-air temperature range | 4 | |
| Differential input voltage | VID | -36 | 36 | V | Differential voltage at IN+ with respect to IN- | 4 | |
| Input pin voltage range | VIN | -0.3 | 36 | V | Absolute maximum rating | 4 | |
| Output pin voltage range | VO | -0.3 | 36 | V | Absolute maximum rating | 4 | |
| Output current | IO | 18 | mA | Absolute maximum rating | 4 | ||
| Operating virtual-junction temperature | Tj | 150 | ℃ | Absolute maximum rating | 4 | ||
| Storage temperature range | Tstg | -50 | 150 | ℃ | Absolute maximum rating | 4 | |
| Electrostatic discharge, Human Body Model (HBM) | VESD | 0 | 1000 | V | Per ANSI/ESDA/JEDEC JS-001 | 4 | |
| Electrostatic discharge, Charged Device Model (CDM) | VESD | 0 | 500 | V | Per JEDEC specification JESD22-C101 | 4 | |
| Supply voltage range | Vs | 2 | 30 | V | Vs = VCC − GND | 4 | |
| Input pin voltage range | 0 | V | Upper limit printed as VCC − 2 V (not numeric) | 4 | |||
| Ambient temperature (2903) | TA | -25 | 85 | °C | Over operating free-air temperature range | 4 | |
| Junction-to-ambient thermal resistance, TSSOP8 | RSJA | 205 | °c/w | Typical value, TSSOP8 package | 4 | ||
| Junction-to-case (top) thermal resistance, TSSOP8 | Rejc(top) | 89 | °c/w | Typical value, TSSOP8 package | 4 |
CAD (KiCad official)
- Symbol:
XL2903-TS - Footprint:
Package_SO:TSSOP-8_3x3mm_P0.65mm - 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
xl2903-ts-etched.step/xl2903-ts-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xl2903-ts.step/xl2903-ts.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XINLUDA datasheet (12 pp, sha256
684d00669bcd787d, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).