component

XL2902-TS

Public Made by Adom

by adom

XINLUDA Operational Amplifier, TSSOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentoperational amplifier-comparatorxl2902-tsfactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Datasheet

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

XL2902-TS

XINLUDA · Operational Amplifier · TSSOP-14

XL2902-TS from XINLUDA, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Out 1 output Output of amplifier 1.
2 1IN- input Negative (inverting) input of amplifier 1.
3 1IN+ input Positive (non-inverting) input of amplifier 1.
4 VCC power_in Positive (maximum) power supply, 3.0 V to 32 V single supply with absolute maximum of 32 V.
5 2IN+ input Positive (non-inverting) input of amplifier 2.
6 2IN- input Negative (inverting) input of amplifier 2.
7 Out 2 output Output of amplifier 2.
8 Out 3 output Output of amplifier 3.
9 3IN- input Negative (inverting) input of amplifier 3.
10 3IN+ input Positive (non-inverting) input of amplifier 3.
11 VEE/GND power_in Negative (lowest) power supply or ground for single power supply operation.
12 4IN+ input Positive (non-inverting) input of amplifier 4.
13 4IN- input Negative (inverting) input of amplifier 4.
14 Out 4 output Output of amplifier 4.

Key specifications

Parameter Value
Manufacturer XINLUDA
Package TSSOP-14
Category Operational Amplifier/Comparator
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power Supply Voltage, single supply VCC 32 Vdc Single supply, TA = +25C 4
Power Supply Voltage, split supplies VCC, VEE 16 Vdc Split supplies, TA = +25C 4
Input Differential Voltage Range VIDR 32 Vdc Note 1, split power supplies 4
Input Common Mode Voltage Range VICR -0.3 32 Vdc Note 2 4
Junction Temperature TJ 150 C 4
Thermal Resistance, Junction-to-Air RθJA 190 C/W Case 948G (TSSOP14), Note 3 4
Storage Temperature Range Tstg -50 150 C 4
ESD Protection, Human Body Model Vesd 2000 V Any pin 4
ESD Protection, Machine Model Vesd 200 V Any pin 4
Operating Ambient Temperature Range TA -40 105 C XL2902-TS 4
Input Offset Voltage VIO 2 7 mV VCC = 5.0 V to 30 V, VICR = 0 V to VCC-1.7 V, VO = 1.4 V, RS = 0 Ω, TA = 25C 5
Input Offset Voltage VIO 10 mV TA = Thigh (Note 4) 5
Average Temperature Coefficient of Input Offset Voltage ΔVIO/ΔT 7 µV/C TA = Thigh to Tlow (Notes 4 and 6) 5
Input Offset Current IIO 5 50 nA 5
Input Offset Current IIO 200 nA TA = Thigh to Tlow (Note 4) 5
Average Temperature Coefficient of Input Offset Current ΔIIO/ΔT 10 pA/C TA = Thigh to Tlow (Notes 4 and 6) 5
Input Bias Current IIB -90 -250 nA 5
Input Bias Current IIB -500 nA TA = Thigh to Tlow (Note 4) 5
Input Common Mode Voltage Range VICR 0 28.3 V VCC = 30 V, TA = +25C (Note 5) 5
Input Common Mode Voltage Range VICR 0 28 V VCC = 30 V, TA = Thigh to Tlow (Note 4) 5
Large Signal Open Loop Voltage Gain AVOL 25 100 V/mV RL = 2.0 kΩ, VCC = 15 V, for Large VO Swing 5
Large Signal Open Loop Voltage Gain AVOL 15 V/mV TA = Thigh to Tlow (Note 4) 5
Channel Separation CS -120 dB 10 kHz ≤ f ≤ 20 kHz, Input Referenced 5
Common Mode Rejection CMR 50 70 dB RS ≤ 10 kΩ 5
Power Supply Rejection PSR 50 100 dB 5
Output Voltage High Limit VOH 3.3 3.5 V VCC = 5.0 V, RL = 2.0 kΩ, TA = 25°C 6
Output Voltage High Limit VOH 26 V VCC = 30 V, RL = 2.0 kΩ (TA = Thigh to Tlow) (Note 7) 6
Output Voltage High Limit VOH 27 28 V VCC = 30 V, RL = 10 kΩ (TA = Thigh to Tlow) (Note 7) 6
Output Voltage Low Limit VOL 5 100 mV VCC = 5.0 V, RL = 10 kΩ, TA = Thigh to Tlow (Note 7) 6
Output Source Current IO+ 20 40 mA VID = +1.0 V, VCC = 15 V, TA = 25°C 6
Output Source Current IO+ 10 20 mA VID = +1.0 V, VCC = 15 V, TA = Thigh to Tlow (Note 7) 6
Output Sink Current IO- 10 20 mA VID = -1.0 V, VCC = 15 V, TA = 25°C 6
Output Sink Current IO- 5 8 mA VID = -1.0 V, VCC = 15 V, TA = Thigh to Tlow (Note 7) 6
Output Short Circuit to Ground ISC 40 60 mA 6
Power Supply Current ICC 3 mA VCC = 30 V, VO = 0 V, RL = ∞, TA = Thigh to Tlow (Note 7) 6
Power Supply Current ICC 1.2 mA VCC = 5.0 V, VO = 0 V, RL = ∞, TA = Thigh to Tlow (Note 7) 6
Slew rate at unity gain SR 0.5 V/μs RL = 1 MΩ, CL = 30 pF, VI = ±10 V, VCC = ±15 V, TA = 25°C 4
Unity-gain bandwidth B1 1.2 MHz RL = 1 MΩ, CL = 20 pF, VCC = ±15 V, TA = 25°C 4

CAD (KiCad official)

  • Symbol: XL2902-TS
  • Footprint: Package_SO:TSSOP-14_4.4x5mm_P0.65mm
  • 3D model: TSSOP-14 (KiCad packages3D, STEP)
  • 3D model files: xl2902-ts-etched.step / xl2902-ts-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); xl2902-ts.step / xl2902-ts.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: XINLUDA datasheet (14 pp, sha256 384a39e4ec7d0b3c, retrieved 2026-10-22, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF