main
Ray
Publish 0.3.0
36d402a
XL2576S-ADJE1
3D generated from the datasheet; KiCad's model does not fit this maker's body.
XLSEMI · DC-DC Converters · TO-263-5
XL2576S-ADJE1 from XLSEMI, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Supply Voltage Input Pin. Operates from 4.5V to 40V DC. Bypass VIN to GND with a suitably large capacitor to eliminate input noise. Absolute max 45V. |
| 2 | SW | passive | Power Switch Output Pin. Switch node that supplies power to the output inductor and Schottky catch diode. Rated for VSW = -0.3V to VIN. |
| 3 | GND | power_in | Ground Pin. Must be routed carefully - place outside the Schottky diode to output-capacitor ground path to prevent switching current spikes from inducing noise. Also connected internally to the metal tab. |
| 4 | FB | input | Feedback Pin. Through an external resistor divider, senses the output voltage and regulates it. Feedback threshold voltage is 1.23V. Absolute max: -0.3V to VIN. |
| 5 | EN | input | Enable Pin. Drive EN low to turn on the device, drive high to turn it off. Floating defaults to low (enabled). VEN threshold: 1.4V high (off) / 0.8V low (on). Absolute max: -0.3V to VIN. |
| 6 | GND | power_in | Package tab (pad 6). printed: Metal Tab GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XLSEMI |
| Package | TO-263-5 |
| Category | PMIC |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (XL2576-ADJ) | VOUT | 1.193 | 1.23 | 1.267 | V | Vin = 4.5V to 40V, Iload=0.2A to 3A | 6 |
| Input operation voltage | Vin | 4.5 | 40 | V | 7 | ||
| Shutdown Supply Current | IS | 80 | 200 | uA | VEN=5V | 7 | |
| Quiescent Supply Current | Iq | 2 | 10 | mA | VEN=0V, VFB=Vin | 7 | |
| Oscillator Frequency | Fosc | 40 | 52 | 64 | Khz | 7 | |
| Switch Current Limit | IL | 3.6 | 4.8 | 6.9 | A | VFB=0V | 7 |
| EN Pin Threshold High (Regulator OFF) | VEN | 1.4 | V | High (Regulator OFF) | 7 | ||
| EN Pin Threshold Low (Regulator ON) | VEN | 0.8 | V | Low (Regulator ON) | 7 | ||
| EN Pin Input Leakage Current (OFF) | IH | 5 | 15 | uA | VEN=2.5V (OFF) | 7 | |
| EN Pin Input Leakage Current (ON) | IL | 0.2 | 5 | uA | VEN=0.5V (ON) | 7 | |
| Output Saturation Voltage | VCE | 1.3 | 1.5 | V | VFB=0V, Iout=3A | 7 | |
| Max Duty Cycle | DMAX | 100 | % | VFB=0V | 7 | ||
| Input Voltage | Vin | -0.3 | 45 | V | 5 | ||
| Feedback Pin Voltage | VFB | -0.3 | V | Upper limit printed as Vin (not numeric) | 5 | ||
| EN Pin Voltage | VEN | -0.3 | V | Upper limit printed as Vin (not numeric) | 5 | ||
| Output Switch Pin Voltage | VSW | -0.3 | V | Upper limit printed as Vin (not numeric) | 5 | ||
| ESD (HBM) | 2000 | V | Printed as >2000 | 5 | |||
| Operating Junction Temperature | TJ | -40 | 125 | oC | 5 | ||
| Storage Temperature | TSTG | -65 | 150 | oC | 5 | ||
| Lead Temperature (Soldering, 10 sec) | TLEAD | 260 | oC | Soldering, 10 sec | 5 | ||
| Thermal Resistance (Junction to Ambient) | RJA | 30 | oC /W | Junction to Ambient, No Heatsink, Free Air | 5 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
XL2576S-ADJE1 - Footprint:
Package_TO_SOT_SMD:TO-263-5_TabPin6 - 3D model: TO-263-5, generated on the KiCad land (body 8.7 x 10.16 mm, terminals on the pads, 4.57 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
xl2576s-adje1-etched.step/xl2576s-adje1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xl2576s-adje1.step/xl2576s-adje1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XLSEMI datasheet (15 pp, sha256
c3857bfcd9cf7c08, retrieved 2026-11-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# XL2576S-ADJE1
> 3D generated from the datasheet; KiCad's model does not fit this maker's body.
**XLSEMI** · DC-DC Converters · TO-263-5
XL2576S-ADJE1 from XLSEMI, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Supply Voltage Input Pin. Operates from 4.5V to 40V DC. Bypass VIN to GND with a suitably large capacitor to eliminate input noise. Absolute max 45V. |
| 2 | SW | passive | Power Switch Output Pin. Switch node that supplies power to the output inductor and Schottky catch diode. Rated for VSW = -0.3V to VIN. |
| 3 | GND | power_in | Ground Pin. Must be routed carefully - place outside the Schottky diode to output-capacitor ground path to prevent switching current spikes from inducing noise. Also connected internally to the metal tab. |
| 4 | FB | input | Feedback Pin. Through an external resistor divider, senses the output voltage and regulates it. Feedback threshold voltage is 1.23V. Absolute max: -0.3V to VIN. |
| 5 | EN | input | Enable Pin. Drive EN low to turn on the device, drive high to turn it off. Floating defaults to low (enabled). VEN threshold: 1.4V high (off) / 0.8V low (on). Absolute max: -0.3V to VIN. |
| 6 | GND | power_in | Package tab (pad 6). printed: Metal Tab GND. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XLSEMI |
| Package | TO-263-5 |
| Category | PMIC |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (XL2576-ADJ) | VOUT | 1.193 | 1.23 | 1.267 | V | Vin = 4.5V to 40V, Iload=0.2A to 3A | 6 |
| Input operation voltage | Vin | 4.5 | | 40 | V | | 7 |
| Shutdown Supply Current | IS | | 80 | 200 | uA | VEN=5V | 7 |
| Quiescent Supply Current | Iq | | 2 | 10 | mA | VEN=0V, VFB=Vin | 7 |
| Oscillator Frequency | Fosc | 40 | 52 | 64 | Khz | | 7 |
| Switch Current Limit | IL | 3.6 | 4.8 | 6.9 | A | VFB=0V | 7 |
| EN Pin Threshold High (Regulator OFF) | VEN | 1.4 | | | V | High (Regulator OFF) | 7 |
| EN Pin Threshold Low (Regulator ON) | VEN | | | 0.8 | V | Low (Regulator ON) | 7 |
| EN Pin Input Leakage Current (OFF) | IH | | 5 | 15 | uA | VEN=2.5V (OFF) | 7 |
| EN Pin Input Leakage Current (ON) | IL | | 0.2 | 5 | uA | VEN=0.5V (ON) | 7 |
| Output Saturation Voltage | VCE | | 1.3 | 1.5 | V | VFB=0V, Iout=3A | 7 |
| Max Duty Cycle | DMAX | | 100 | | % | VFB=0V | 7 |
| Input Voltage | Vin | -0.3 | | 45 | V | | 5 |
| Feedback Pin Voltage | VFB | -0.3 | | | V | Upper limit printed as Vin (not numeric) | 5 |
| EN Pin Voltage | VEN | -0.3 | | | V | Upper limit printed as Vin (not numeric) | 5 |
| Output Switch Pin Voltage | VSW | -0.3 | | | V | Upper limit printed as Vin (not numeric) | 5 |
| ESD (HBM) | | 2000 | | | V | Printed as >2000 | 5 |
| Operating Junction Temperature | TJ | -40 | | 125 | oC | | 5 |
| Storage Temperature | TSTG | -65 | | 150 | oC | | 5 |
| Lead Temperature (Soldering, 10 sec) | TLEAD | | | 260 | oC | Soldering, 10 sec | 5 |
| Thermal Resistance (Junction to Ambient) | RJA | | 30 | | oC /W | Junction to Ambient, No Heatsink, Free Air | 5 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `XL2576S-ADJE1`
- Footprint: `Package_TO_SOT_SMD:TO-263-5_TabPin6`
- 3D model: TO-263-5, generated on the KiCad land (body 8.7 x 10.16 mm, terminals on the pads, 4.57 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `xl2576s-adje1-etched.step` / `xl2576s-adje1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `xl2576s-adje1.step` / `xl2576s-adje1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [XLSEMI datasheet](docs/xl2576s-adje1-datasheet.pdf) (15 pp, sha256 `c3857bfcd9cf7c08`, retrieved 2026-11-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/xl2576s-adje1-datasheet.pdf)