component
XL232-TS
Public Made by Adomby adom
XINLUDA RS232 ICs, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownXL232-TS
XINLUDA · RS232 ICs · TSSOP-16
XL232-TS from XINLUDA, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Positive lead of the C1 charge-pump capacitor. |
| 2 | V+ | power_out | Positive charge pump output (+10V unloaded) for storage capacitor only, unregulated. |
| 3 | C1- | passive | Negative lead of the C1 charge-pump capacitor. |
| 4 | C2+ | passive | Positive lead of the C2 charge-pump capacitor. |
| 5 | C2- | passive | Negative lead of the C2 charge-pump capacitor. |
| 6 | V- | power_out | Negative charge pump output (-10V unloaded) for storage capacitor only, unregulated. |
| 7 | T2OUT | output | RS-232 line data output (to remote RS-232 system) of driver 2. |
| 8 | R2IN | input | RS-232 line data input (from remote RS-232 system) of receiver 2, with 5k nominal input resistance and ±30V operating range. |
| 9 | R2OUT | output | Logic data output (to UART) of receiver 2. |
| 10 | T2IN | input | Logic data input (from UART) of driver 2, with built-in 400k pull-up to VCC. |
| 11 | T1IN | input | Logic data input (from UART) of driver 1, with built-in 400k pull-up to VCC. |
| 12 | R1OUT | output | Logic data output (to UART) of receiver 1. |
| 13 | R1IN | input | RS-232 line data input (from remote RS-232 system) of receiver 1, with 5k nominal input resistance and ±30V operating range. |
| 14 | T1OUT | output | RS-232 line data output (to remote RS-232 system) of driver 1. |
| 15 | GND | power_in | Ground. |
| 16 | VCC | power_in | Supply voltage, connect to external 5V power supply (absolute maximum -0.3 to +6V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XINLUDA |
| Package | TSSOP-16 |
| Category | Interface |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC Supply voltage range | VCC | -0.3 | 6 | V | 4 | ||
| V+ output (Note 1) | V+ | 14 | V | (Note 1) | 4 | ||
| V- output (Note 1) | V- | -14 | 0.3 | V | (Note 1) | 4 | |
| Logic input voltage TIN | VIN | -0.3 | V | TIN input | 4 | ||
| RS-232 input voltage RIN | VIN | -30 | 30 | V | RIN input | 4 | |
| Logic output voltage ROUT | VOUT | -0.3 | V | ROUT output | 4 | ||
| Continuous power dissipation, TSSOP16 | P | 580 | mW | TA = +70°C; derate 18.60 mW/°C above +70°C | 4 | ||
| Operating temperature range | Totr | -40 | 85 | ℃ | 4 | ||
| Storage temperature range | Tstg | -45 | 125 | ℃ | 4 | ||
| Lead temperature, soldering | TLT | 300 | ℃ | soldering, 10 s | 4 | ||
| Soldering temperature, reflow | TST | 225 | ℃ | reflow | 4 | ||
| Soldering temperature, lead-free packages | Tf | 260 | ℃ | All other lead(Pb)-free packages | 4 | ||
| Soldering temperature, leaded packages | Tc | 240 | ℃ | All other packages containing lead(Pb) | 4 | ||
| Output Voltage Swing | 5 | 7.3 | V | All transmitter outputs loaded with 3kΩ to ground | 5 | ||
| VCC Supply Current | 8 | 16 | mA | No load, TA = +25°C | 5 | ||
| Logic Pullup Current | 1.5 | 200 | µA | VTIN = 0V | 5 | ||
| Receiver Input Voltage Operating Range | -30 | 30 | V | 5 | |||
| RS-232 Input Hysteresis | 0.2 | 0.5 | 1 | V | VCC = +5V, no hysteresis in shutdown | 5 | |
| RS-232 Input Resistance | 3 | 5 | 7 | kΩ | TA = +25°C, VCC = +5V | 5 | |
| TTL/CMOS Output Voltage Low | 0.4 | V | IOUT = 1.6mA (IOUT = 3.2mA) | 5 | |||
| TTL/CMOS Output Voltage High | 3.5 | V | IOUT = -1mA | 5 | |||
| Propagation Delay tPHLS | tPHLS | 4 | 40 | µs | RS-232 IN to TTL/CMOS OUT, CL = 150pF | 5 | |
| Propagation Delay tPLHS | tPLHS | 6 | 40 | µs | RS-232 IN to TTL/CMOS OUT, CL = 150pF | 5 | |
| Transition Region Slew Rate | 4 | 30 | V/µs | TA = +25°C, VCC = +5V, RL = 3kΩ to 7kΩ, CL = 50pF to 2500pF, measured from +3V to -3V or -3V to +3V | 5 | ||
| Transmitter Output Resistance | 300 | Ω | VCC = V+ = V- = 0V, VOUT = ±2V | 5 | |||
| Transmitter Output Short-Circuit Current | -10 | 10 | mA | 5 | |||
| VCC supply tolerance (nominal +5V) | VCC | -5 | 5 | % | C1-C4 = 1µF/16V; TA = free-air temperature range | 5 |
CAD (KiCad official)
- Symbol:
XL232-TS - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
xl232-ts-etched.step/xl232-ts-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xl232-ts.step/xl232-ts.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XINLUDA datasheet (11 pp, sha256
3bd61626045185e9, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).