Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

XL2110SPBF

XINLUDA · Gate Drivers · SOP-16-300mil

XL2110SPBF from XINLUDA, in a SOP-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 LO output Low side gate drive output, in phase with LIN, swings from COM to VCC.
2 COM power_in Low side return, the reference for LO and VCC.
3 VCC power_in Low side fixed supply, recommended 10 V to 20 V (absolute max 25 V) with undervoltage lockout.
4 NC unconnected Position shown without a pin name in the lead assignment drawing, no function stated.
5 NC unconnected Position shown without a pin name in the lead assignment drawing, no function stated.
6 VS power_in High side floating supply return (offset), operational up to 500 V (XL2110) or 600 V (XL2113).
7 VB power_in High side floating supply, recommended VS+10 V to VS+20 V, absolute max 525 V (XL2110) or 625 V (XL2113).
8 HO output High side gate drive output, in phase with HIN, swings from VS to VB.
9 NC unconnected Position shown without a pin name in the lead assignment drawing, no function stated.
10 NC unconnected Position shown without a pin name in the lead assignment drawing, no function stated.
11 VDD power_in Logic supply, recommended VSS+3 V to VSS+20 V (absolute max VSS+25 V).
12 HIN input Logic input for high side gate driver output (HO), in phase, CMOS Schmitt-triggered with pull-down.
13 SD input Logic input for shutdown, CMOS Schmitt-triggered with pull-down.
14 LIN input Logic input for low side gate driver output (LO), in phase, CMOS Schmitt-triggered with pull-down.
15 VSS power_in Logic ground, with logic offset of -5 V to +5 V relative to COM.
16 NC unconnected Position shown without a pin name in the lead assignment drawing, no function stated.

Key specifications

Parameter Value
Manufacturer XINLUDA
Package SOP-16-300mil
Category Motor Driver ICs
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Turn-on propagation delay ton 120 150 ns VS = 0 5
Turn-off propagation delay toff 94 125 ns VS = 500V/600V 5
Shutdown propagation delay tsd 110 140 ns VS = 500V/600V 5
Turn-on rise time tr 25 35 ns 5
Turn-off fall time tf 17 25 ns 5
Delay matching, HS & LS turn-on/turn-off (XL2110) MT 10 ns 5
Logic 1 input voltage VIH 9.5 V 5
Logic 0 input voltage VIL 6 V 5
High level output voltage, VBIAS - VO VOH 1.2 V IO = 0A 5
Low level output voltage, VO VOL 0.1 V IO = 0A 5
Offset supply leakage current ILK 50 µA VB=VS = 500V/600V 5
Quiescent VBS supply current IQBS 125 230 µA VIN = 0V or VDD 5
Quiescent VCC supply current IQCC 180 340 µA VIN = 0V or VDD 5
Quiescent VDD supply current IQDD 15 30 µA VIN = 0V or VDD 5
Logic 1 input bias current IIN+ 20 40 µA VIN = VDD 5
Logic 0 input bias current IIN- 1 µA VIN = 0V 5
VBS supply undervoltage positive going threshold VBSUV+ 7.5 8.6 9.7 V 5
VBS supply undervoltage negative going threshold VBSUV- 7 8.2 9.4 V 5
VCC supply undervoltage positive going threshold VCCUV+ 7.4 8.5 9.6 V 5
VCC supply undervoltage negative going threshold VCCUV- 7 8.2 9.4 V 5
Output high short circuit pulsed current IO+ 2 2.5 A VO=0V, VIN=VDD; PW ≤ 10 µs 5
Output low short circuit pulsed current IO- 2 2.5 A VO=15V, VIN=0V; PW ≤ 10 µs 5
High side floating supply voltage (XL2110) VB -0.3 525 V XL2110 4
Low side fixed supply voltage VCC -0.3 25 V 4
Logic supply voltage VDD -0.3 V Upper limit printed as VSS + 25 4
Allowable offset supply voltage transient (figure 2) dVs/dt 50 V/ns 4
Package power dissipation @ TA +25°C (16 lead SOIC) PD 1.25 W TA = +25°C, 16 lead SOIC 4
Thermal resistance, junction to ambient (16 lead SOIC) RTHJA 100 °C/W 16 lead SOIC, board mounted, still air 4
Junction temperature TJ 150 °C 4
Storage temperature TS -55 150 °C 4
Lead temperature (soldering) TL 300 °C soldering, 10 seconds 4
High side floating supply offset voltage (XL2110) VS 500 V XL2110; Note 1: logic operational for VS of -4 to +500V 4
Low side fixed supply voltage VCC 10 20 V 4
Low side output voltage VLO 0 V Upper limit printed as VCC 4
Logic supply offset voltage VSS -5 5 V Note 2: when VDD < 5V, minimum VSS offset limited to -VDD 4
Ambient temperature TA -40 85 °C 4

CAD (KiCad official)

  • Symbol: XL2110SPBF
  • Footprint: Package_SO:SOIC-16W_7.5x12.8mm_P1.27mm
  • 3D model: SOP-16-300mil (KiCad packages3D, STEP)
  • 3D model files: xl2110spbf-etched.step / xl2110spbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); xl2110spbf.step / xl2110spbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: XINLUDA datasheet (18 pp, sha256 1dcbc93b185abb54, retrieved 2026-11-13, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF