component
XL1509E-5.0
Public Made by Adomby adom
UMW DC-DC Converters, ESOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownXL1509E-5.0
UMW · DC-DC Converters · ESOP-8
XL1509E-5.0 from UMW, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Supply voltage input pin; XL1509 operates from a 4.5V to 40V DC input, and the input should be bypassed to GND with a suitably large capacitor to eliminate noise. |
| 2 | OUTPUT | output | Power switch output pin (SW) that is the switch node supplying power to the output; the datasheet gives no voltage limit for this pin beyond the absolute maximum output switch pin voltage of -0.3 to VIN. |
| 3 | FEEDBACK | input | Feedback pin (FB) that senses the output voltage through an external resistor divider and regulates it to a feedback threshold voltage of 1.23V. |
| 4 | ON/OFF | input | Enable pin where driving it low turns the device on and driving it high turns it off; the pin floats low by default, and it has TTL shutdown capability with hysteresis. |
| 5 | GND | power_in | Ground pin that must be laid out so it sits outside the Schottky diode to output capacitor ground path to keep switching current spikes from inducing noise into the device. |
| 6 | GND | power_in | Ground pin that must be laid out so it sits outside the Schottky diode to output capacitor ground path to keep switching current spikes from inducing noise into the device. |
| 7 | GND | power_in | Ground pin that must be laid out so it sits outside the Schottky diode to output capacitor ground path to keep switching current spikes from inducing noise into the device. |
| 8 | GND | power_in | Ground pin that must be laid out so it sits outside the Schottky diode to output capacitor ground path to keep switching current spikes from inducing noise into the device. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | UMW |
| Package | ESOP-8 |
| Category | Power Management (PMIC) |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage (XL1509-5.0 fixed version) | VOUT | 4.8 | 5 | 5.2 | V | VIN=7V to 40V, ILOAD=0.2A to 2A | 5 |
| Input operation voltage | VIN | 4.5 | 40 | V | 6 | ||
| Oscillator frequency | FOSC | 117 | 150 | 183 | Khz | 6 | |
| Input voltage (absolute maximum) | VIN | -0.3 | 45 | V | 4 | ||
| Feedback pin voltage (absolute maximum) | VFB | -0.3 | V | 4 | |||
| ON/OFF pin voltage (absolute maximum) | VON/OFF | -0.3 | V | 4 | |||
| Output switch pin voltage (absolute maximum) | VOutput | -0.3 | V | 4 | |||
| Operating junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Storage temperature | TSTG | -65 | 150 | °C | 4 | ||
| Lead temperature (soldering, 10 sec) | TLEAD | 260 | °C | Soldering, 10 sec | 4 | ||
| ESD (HBM) | 2000 | V | HBM | 4 |
CAD (KiCad official)
- Symbol:
XL1509E-5.0 - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm - 3D model: ESOP-8 (KiCad packages3D, STEP)
- 3D model files:
xl1509e-5-0-etched.step/xl1509e-5-0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xl1509e-5-0.step/xl1509e-5-0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: UMW datasheet (15 pp, sha256
bd5713838034a224, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).