component
XL1509E-12
Public Made by Adomby adom
UMW DC-DC Converters, ESOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
XL1509E-12
UMW · DC-DC Converters · ESOP-8
XL1509E-12 from UMW, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Supply voltage input operating from 4.5V to 40V DC; bypass VIN to GND with a suitably large capacitor to eliminate input noise. |
| 2 | OUTPUT | output | Power switch output (SW) is the switch node that supplies power to the output, with absolute maximum voltage of -0.3 V to VIN. |
| 3 | FEEDBACK | input | Feedback input senses the output voltage through an external resistor divider and regulates it to a feedback threshold of 1.23V. |
| 4 | ON/OFF | input | Enable input: drive low to turn the device on and high to turn it off, with floating defaulting to low and absolute maximum voltage of -0.3 V to VIN. |
| 5 | GND | power_in | Ground pin that should be placed outside the Schottky diode to output capacitor ground path to keep switching current spikes from inducing noise into the device. |
| 6 | GND | power_in | Ground pin that should be placed outside the Schottky diode to output capacitor ground path to keep switching current spikes from inducing noise into the device. |
| 7 | GND | power_in | Ground pin that should be placed outside the Schottky diode to output capacitor ground path to keep switching current spikes from inducing noise into the device. |
| 8 | GND | power_in | Ground pin that should be placed outside the Schottky diode to output capacitor ground path to keep switching current spikes from inducing noise into the device. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | UMW |
| Package | ESOP-8 |
| Category | Power Management (PMIC) |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage (12V version) | VOUT | 11.52 | 12 | 12.48 | V | XL1509-12, VIN=15V to 40V, ILOAD=0.2A to 2A, TA=25°C | 5 |
| Input operation voltage | VIN | 4.5 | 40 | V | 6 | ||
| Oscillator frequency | FOSC | 117 | 150 | 183 | Khz | 6 | |
| ON/OFF pin threshold, high (regulator OFF) | VON/OFF | 1.4 | V | High (Regulator OFF) | 6 | ||
| ON/OFF pin threshold, low (regulator ON) | VON/OFF | 0.8 | V | Low (Regulator ON) | 6 | ||
| Input voltage | VIN | -0.3 | 45 | V | 4 | ||
| Feedback pin voltage | VFB | -0.3 | V | Upper limit printed as VIN | 4 | ||
| ON/OFF pin voltage | VON/OFF | -0.3 | V | Upper limit printed as VIN | 4 | ||
| Output switch pin voltage | VOutput | -0.3 | V | Upper limit printed as VIN | 4 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Storage temperature | TSTG | -65 | 150 | °C | 4 | ||
| Lead temperature (soldering) | TLEAD | 260 | °C | 10 sec | 4 | ||
| ESD (HBM) | 2000 | V | HBM | 4 | |||
| Thermal resistance, junction to ambient | RθJA | 100 | °C/W | Junction to ambient, no heatsink, free air; printed for SOIC8 | 4 |
CAD (KiCad official)
- Symbol:
XL1509E-12 - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm - 3D model: ESOP-8 (KiCad packages3D, STEP)
- 3D model files:
xl1509e-12-etched.step/xl1509e-12-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xl1509e-12.step/xl1509e-12.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: UMW datasheet (15 pp, sha256
bd5713838034a224, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# XL1509E-12
**UMW** · DC-DC Converters · ESOP-8
XL1509E-12 from UMW, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Supply voltage input operating from 4.5V to 40V DC; bypass VIN to GND with a suitably large capacitor to eliminate input noise. |
| 2 | OUTPUT | output | Power switch output (SW) is the switch node that supplies power to the output, with absolute maximum voltage of -0.3 V to VIN. |
| 3 | FEEDBACK | input | Feedback input senses the output voltage through an external resistor divider and regulates it to a feedback threshold of 1.23V. |
| 4 | ON/OFF | input | Enable input: drive low to turn the device on and high to turn it off, with floating defaulting to low and absolute maximum voltage of -0.3 V to VIN. |
| 5 | GND | power_in | Ground pin that should be placed outside the Schottky diode to output capacitor ground path to keep switching current spikes from inducing noise into the device. |
| 6 | GND | power_in | Ground pin that should be placed outside the Schottky diode to output capacitor ground path to keep switching current spikes from inducing noise into the device. |
| 7 | GND | power_in | Ground pin that should be placed outside the Schottky diode to output capacitor ground path to keep switching current spikes from inducing noise into the device. |
| 8 | GND | power_in | Ground pin that should be placed outside the Schottky diode to output capacitor ground path to keep switching current spikes from inducing noise into the device. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | UMW |
| Package | ESOP-8 |
| Category | Power Management (PMIC) |
| Pins | 9 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage (12V version) | VOUT | 11.52 | 12 | 12.48 | V | XL1509-12, VIN=15V to 40V, ILOAD=0.2A to 2A, TA=25°C | 5 |
| Input operation voltage | VIN | 4.5 | | 40 | V | | 6 |
| Oscillator frequency | FOSC | 117 | 150 | 183 | Khz | | 6 |
| ON/OFF pin threshold, high (regulator OFF) | VON/OFF | 1.4 | | | V | High (Regulator OFF) | 6 |
| ON/OFF pin threshold, low (regulator ON) | VON/OFF | | | 0.8 | V | Low (Regulator ON) | 6 |
| Input voltage | VIN | -0.3 | | 45 | V | | 4 |
| Feedback pin voltage | VFB | -0.3 | | | V | Upper limit printed as VIN | 4 |
| ON/OFF pin voltage | VON/OFF | -0.3 | | | V | Upper limit printed as VIN | 4 |
| Output switch pin voltage | VOutput | -0.3 | | | V | Upper limit printed as VIN | 4 |
| Operating junction temperature | TJ | -40 | | 125 | °C | | 4 |
| Storage temperature | TSTG | -65 | | 150 | °C | | 4 |
| Lead temperature (soldering) | TLEAD | | | 260 | °C | 10 sec | 4 |
| ESD (HBM) | | | | 2000 | V | HBM | 4 |
| Thermal resistance, junction to ambient | RθJA | | 100 | | °C/W | Junction to ambient, no heatsink, free air; printed for SOIC8 | 4 |
## CAD (KiCad official)
- Symbol: `XL1509E-12`
- Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm`
- 3D model: ESOP-8 (KiCad packages3D, STEP)
- 3D model files: `xl1509e-12-etched.step` / `xl1509e-12-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `xl1509e-12.step` / `xl1509e-12.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [UMW datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8757270536802050048) (15 pp, sha256 `bd5713838034a224`, retrieved 2026-10-19, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/xl1509e-12-datasheet.pdf)