component
XL1509A-ADJE1
Public Made by Adomby adom
XLSEMI(芯龙) DC-DC Converters, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 1d ago |
| viewers | 1d ago |
| package.json | 1d ago |
| page.json | 1d ago |
| README.md | 1d ago |
| xl1509a-adje1-etched.glb | 1d ago |
| xl1509a-adje1-etched.step | 1d ago |
| xl1509a-adje1-hero.glb | 1d ago |
| xl1509a-adje1-hero.overlay.json | 1d ago |
| xl1509a-adje1.glb | 1d ago |
| xl1509a-adje1.kicad_mod | 1d ago |
| xl1509a-adje1.kicad_sym | 1d ago |
| xl1509a-adje1.lbr | 1d ago |
| xl1509a-adje1.step | 1d ago |
XL1509A-ADJE1
XLSEMI(芯龙) · DC-DC Converters · SOP-8
XL1509A-ADJE1 from XLSEMI(芯龙), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input pin supporting a DC 4.5V to 50V operating range, with an electrolytic capacitor required in parallel between VIN and GND to eliminate noise. |
| 2 | SW | output | Power switch output pin; SW is the switching node that delivers the output power. |
| 3 | FB | input | Feedback pin that senses the output voltage through an external resistor divider; the reference voltage is 1.23V for the adjustable version. |
| 4 | EN | input | Enable pin that is active low: a high level shuts the device down, and it is low when left floating. |
| 5 | GND | power_in | Ground pin. |
| 6 | GND | power_in | Ground pin. |
| 7 | GND | power_in | Ground pin. |
| 8 | GND | power_in | Ground pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XLSEMI(芯龙) |
| Package | SOP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 反馈电压 (feedback voltage, ADJ version) | VFB | 1.212 | 1.23 | 1.248 | V | VIN=12V, VOUT=5.0V, IOUT=0.5A | 4 |
| 反馈基准电压精度 (feature list) | -1.5 | 1.5 | % | 1 | |||
| 工作电压 (operating input voltage) | VIN | 4.5 | 50 | V | 5 | ||
| 关机电流 (shutdown current) | IS | 46 | 100 | uA | VEN=2V | 5 | |
| 静态电流 (quiescent current) | IQ | 1.3 | 2 | mA | 注2: ADJ版本 VFB=10V | 5 | |
| 振荡频率 (oscillator frequency) | FOSC | 135 | 150 | 165 | KHz | 5 | |
| 开关电流限值 (switch current limit) | IL | 3 | A | VFB=0V | 5 | ||
| EN引脚阈值电压 高电平(关断) (EN high threshold) | VEN_H | 1.4 | V | 5 | |||
| EN引脚阈值电压 低电平(开启) (EN low threshold) | VEN_L | 0.8 | V | 5 | |||
| 饱和压降 (saturation voltage) | VCE | 1.1 | 1.3 | V | VFB=0V, IOUT=2A | 5 | |
| 最大占空比 (maximum duty cycle) | DMAX | 100 | % | VFB=0V | 5 | ||
| 输入电压 (absolute maximum) | VIN | -0.3 | 60 | V | 3 | ||
| 反馈引脚电压 (absolute maximum) | VFB | -0.3 | 20 | V | 3 | ||
| 使能引脚电压 (absolute maximum) | VEN | -0.3 | 7 | V | 3 | ||
| 输出开关引脚电压 (absolute maximum) | VSW | -0.3 | V | Printed upper limit is VIN | 3 | ||
| 操作结温 (operating junction temperature) | TJ | -40 | 150 | oC | 3 | ||
| 贮存温度范围 (storage temperature) | TSTG | -65 | 150 | oC | 3 | ||
| 引脚温度 (lead temperature, soldering) | TLEAD | 260 | oC | 焊接10秒 | 3 | ||
| ESD (HBM) | ESD | 8000 | V | HBM, printed as >8000 | 3 | ||
| 热阻结到环境 (junction-to-ambient thermal resistance, SOP8) | RJA | 100 | oC /W | 结到环境，无外部散热片 | 3 | ||
| 环境工作温度范围 (ambient operating temperature, grade 1) | -40 | 125 | ℃ | 温度等级1级 (feature list) | 1 | ||
| 推荐工作电压 (recommended operating voltage) | 4.5 | 50 | V | 推荐工作电压 (feature list) | 1 | ||
| EN引脚电流 (EN pin current) | IEN | 5 | uA | VEN=2.0V | 5 | ||
| 热关断温度 (thermal shutdown temperature) | TSD | 180 | ℃ | 5 | |||
| 热关断迟滞 (thermal shutdown hysteresis) | TD | 50 | ℃ | 5 |
CAD (KiCad official)
- Symbol:
XL1509A-ADJE1 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
xl1509a-adje1-etched.step/xl1509a-adje1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xl1509a-adje1.step/xl1509a-adje1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XLSEMI(芯龙) datasheet (17 pp, sha256
a4865b1dcf3ac763, retrieved 2026-11-05, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).