component
XL1507A-5.0E1
Public Made by Adomby adom
XLSEMI DC-DC Converters, TO-252-5L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
XL1507A-5.0E1
XLSEMI · DC-DC Converters · TO-252-5L
XL1507A-5.0E1 from XLSEMI, in a TO-252-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input pin supporting a wide 4.5V to 50V operating range; an electrolytic capacitor must be connected in parallel between VIN and GND to suppress noise. |
| 2 | SW | output | Power switch output pin and the switching node that carries the output power. |
| 3 | GND | power_in | Ground pin. |
| 4 | FB | input | Feedback pin that senses the output voltage through an external resistor divider to regulate it; the reference voltage for the adjustable version is 1.23V. |
| 5 | EN | input | Enable pin, active low: low enables the device, high shuts it down, and it is low when left floating. |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XLSEMI |
| Package | TO-252-5L |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage | VOUT | 4.925 | 5 | 5.075 | V | VIN=12V, IOUT=0.5A | 4 |
| Input operating voltage | VIN | 4.5 | 50 | V | 5 | ||
| Shutdown current | IS | 46 | 100 | uA | VEN=2V | 5 | |
| Quiescent supply current | IQ | 1.3 | 2 | mA | VFB=10V | 5 | |
| Oscillation frequency | FOSC | 135 | 150 | 165 | KHz | 5 | |
| Switch current limit | IL | 3.4 | A | VFB=0V | 5 | ||
| EN pin threshold voltage, high level (shutdown) | VEN_H | 1.4 | V | 高电平（关断） | 5 | ||
| EN pin threshold voltage, low level (on) | VEN_L | 0.8 | V | 低电平（开启） | 5 | ||
| EN pin current | IEN | 5 | uA | VEN=2.0V | 5 | ||
| Saturation voltage | VCE | 1.1 | 1.3 | V | VFB=0V, IOUT=2A | 5 | |
| Maximum duty cycle | DMAX | 100 | % | VFB=0V | 5 | ||
| Thermal shutdown temperature | TSD | 180 | ℃ | 5 | |||
| Thermal shutdown hysteresis | TD | 50 | ℃ | 5 | |||
| Input voltage (absolute maximum) | VIN | -0.3 | 60 | V | 3 | ||
| Feedback pin voltage (absolute maximum) | VFB | -0.3 | 20 | V | 3 | ||
| Enable pin voltage (absolute maximum) | VEN | -0.3 | 7 | V | 3 | ||
| Switch pin voltage (absolute maximum) | VSW | -0.3 | V | 3 | |||
| Thermal resistance junction to ambient (TO252-5L) | RJA | 50 | °C/W | Junction to ambient, no external heatsink | 3 | ||
| Operating junction temperature | TJ | -40 | 150 | °C | 3 | ||
| Storage temperature range | TSTG | -65 | 150 | °C | 3 | ||
| Lead temperature (soldering) | TLEAD | 260 | °C | Soldering, 10 s | 3 | ||
| ESD (HBM) | ESD | 8000 | V | HBM; datasheet prints '>8000' | 3 | ||
| Ambient operating temperature (temperature grade 1) | TA | -40 | 125 | ℃ | Temperature grade 1, from features list | 1 |
CAD (KiCad official)
- Symbol:
XL1507A-5.0E1 - Footprint:
Package_TO_SOT_SMD:TO-252-5_TabPin6 - 3D model: TO-252-5L (KiCad packages3D, STEP)
- 3D model files:
xl1507a-5-0e1-etched.step/xl1507a-5-0e1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xl1507a-5-0e1.step/xl1507a-5-0e1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XLSEMI datasheet (15 pp, sha256
d4d5e57617bcfb2a, retrieved 2026-10-17, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# XL1507A-5.0E1
**XLSEMI** · DC-DC Converters · TO-252-5L
XL1507A-5.0E1 from XLSEMI, in a TO-252-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input pin supporting a wide 4.5V to 50V operating range; an electrolytic capacitor must be connected in parallel between VIN and GND to suppress noise. |
| 2 | SW | output | Power switch output pin and the switching node that carries the output power. |
| 3 | GND | power_in | Ground pin. |
| 4 | FB | input | Feedback pin that senses the output voltage through an external resistor divider to regulate it; the reference voltage for the adjustable version is 1.23V. |
| 5 | EN | input | Enable pin, active low: low enables the device, high shuts it down, and it is low when left floating. |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XLSEMI |
| Package | TO-252-5L |
| Category | Power Management (PMIC) |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage | VOUT | 4.925 | 5 | 5.075 | V | VIN=12V, IOUT=0.5A | 4 |
| Input operating voltage | VIN | 4.5 | | 50 | V | | 5 |
| Shutdown current | IS | | 46 | 100 | uA | VEN=2V | 5 |
| Quiescent supply current | IQ | | 1.3 | 2 | mA | VFB=10V | 5 |
| Oscillation frequency | FOSC | 135 | 150 | 165 | KHz | | 5 |
| Switch current limit | IL | | 3.4 | | A | VFB=0V | 5 |
| EN pin threshold voltage, high level (shutdown) | VEN_H | | 1.4 | | V | 高电平（关断） | 5 |
| EN pin threshold voltage, low level (on) | VEN_L | | 0.8 | | V | 低电平（开启） | 5 |
| EN pin current | IEN | | 5 | | uA | VEN=2.0V | 5 |
| Saturation voltage | VCE | | 1.1 | 1.3 | V | VFB=0V, IOUT=2A | 5 |
| Maximum duty cycle | DMAX | | 100 | | % | VFB=0V | 5 |
| Thermal shutdown temperature | TSD | | 180 | | ℃ | | 5 |
| Thermal shutdown hysteresis | TD | | 50 | | ℃ | | 5 |
| Input voltage (absolute maximum) | VIN | -0.3 | | 60 | V | | 3 |
| Feedback pin voltage (absolute maximum) | VFB | -0.3 | | 20 | V | | 3 |
| Enable pin voltage (absolute maximum) | VEN | -0.3 | | 7 | V | | 3 |
| Switch pin voltage (absolute maximum) | VSW | -0.3 | | | V | | 3 |
| Thermal resistance junction to ambient (TO252-5L) | RJA | | 50 | | °C/W | Junction to ambient, no external heatsink | 3 |
| Operating junction temperature | TJ | -40 | | 150 | °C | | 3 |
| Storage temperature range | TSTG | -65 | | 150 | °C | | 3 |
| Lead temperature (soldering) | TLEAD | | | 260 | °C | Soldering, 10 s | 3 |
| ESD (HBM) | ESD | 8000 | | | V | HBM; datasheet prints '>8000' | 3 |
| Ambient operating temperature (temperature grade 1) | TA | -40 | | 125 | ℃ | Temperature grade 1, from features list | 1 |
## CAD (KiCad official)
- Symbol: `XL1507A-5.0E1`
- Footprint: `Package_TO_SOT_SMD:TO-252-5_TabPin6`
- 3D model: TO-252-5L (KiCad packages3D, STEP)
- 3D model files: `xl1507a-5-0e1-etched.step` / `xl1507a-5-0e1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `xl1507a-5-0e1.step` / `xl1507a-5-0e1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [XLSEMI datasheet](docs/xl1507a-5-0e1-datasheet.pdf) (15 pp, sha256 `d4d5e57617bcfb2a`, retrieved 2026-10-17, tier: manufacturer)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/xl1507a-5-0e1-datasheet.pdf)