Generated by kicad-footprint-generator · KiCad file format 20260206
XDPS2221XUMA1
Infineon Technologies · AC-DC Controllers & Regulators · SOIC-14
XDPS2221XUMA1 from Infineon Technologies, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PFCGD | output | This pin drives the PFC transistor via a gate resistor. |
| 2 | CS | input | This pin is the input for hybrid-flyback current sensing during the high-side gate driver turn-on phase. |
| 3 | VCC | power_in | This pin supplies the IC, fed from the AC via the HV pin during start-up and from the hybrid-flyback auxiliary winding during normal operation. |
| 4 | GND | power_in | This pin is the ground level of the IC for supply voltage, gate drive and sense signals. |
| 5 | ZCD | input | This pin provides hybrid-flyback zero crossing detection after low-side gate driver turn-off and during burst-mode pause, and measures the reflected output voltage at the auxiliary winding during low-side turn-on. |
| 6 | PFCVS | input | This pin senses the PFC bus voltage through a high-impedance resistor divider from the PFC controller output. |
| 7 | HV | input | This pin is connected to the input AC voltage and serves the internal HV start-up cell for initial VCC charging, AC monitoring and X-capacitor discharge. |
| 8 | MFIO | bidirectional | This pin is connected to GND through an external NTC resistor for ambient temperature detection and also provides UART communication for parameter configuration and failure mode reporting. |
| 9 | FB | input | This pin receives feedback from the secondary side via an optocoupler. |
| 10 | PFCCS | input | This pin is configured for PFC current sensing in combination with zero crossing detection of the PFC choke current. |
| 11 | LSGD | output | This pin drives the hybrid-flyback low-side transistor via a resistor. |
| 12 | HSGND | power_in | This pin is the ground reference node for the hybrid-flyback floating high-side driver domain. |
| 13 | HSVCC | power_in | This pin is the power supply input for the hybrid-flyback floating high-side driver domain. |
| 14 | HSGD | output | This pin drives the hybrid-flyback high-side transistor from the floating driver domain via a resistor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Infineon Technologies |
| Package | SOIC-14 |
| Category | Power Management |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Voltage at pin HV | VHV | -0.3 | 600 | V | Permanently applied as DC value | 48 | |
| Voltage at pin VCC | VVCC | -0.5 | 26 | V | Permanently applied as DC value | 48 | |
| Voltage at pin MFIO | VMFIO | -0.5 | 3.6 | V | Permanently applied as DC value | 48 | |
| Voltage at pin PFCVS | VPFCVS | -0.5 | 3.6 | V | Permanently applied as DC value | 48 | |
| Voltage at pin FB | VFB | -0.5 | 3.6 | V | Permanently applied as DC value | 48 | |
| Voltage at pin ZCD | VZCD | -0.5 | 3.6 | V | Permanently applied as DC value | 48 | |
| Voltage at pin CS | VCS | -0.5 | 3.6 | V | Permanently applied as DC value | 48 | |
| Voltage at pin PFCCS | VPFCS | -0.5 | 3.6 | V | Permanently applied as DC value | 49 | |
| Voltage at pin HSGND | VHSGND | -650 | 650 | V | Referred to GND | 49 | |
| Voltage at pin HSVCC | VHSVCC | -0.5 | 26 | V | Referred to HSGND | 49 | |
| Slew-rate for floating high-side domain | dVHS/dt | -50 | 50 | V/ns | 49 | ||
| Junction operation temperature | TJ | -40 | 125 | °C | 49 | ||
| Storage temperature | TS | -55 | 150 | °C | 49 | ||
| Maximum power dissipation | PTOT | 0.63 | W | TA = 50 °C, TJ = 125 °C, RthJA = 119 K/W | 49 | ||
| ESD HBM capability | VHBM | 2000 | V | Human body model | 49 | ||
| Latch-up capability | ILU | 150 | mA | Pin voltages acc. to abs. max. rating | 49 | ||
| Junction operation temperature | TJ | -25 | 125 | °C | 50 | ||
| External voltage at pin VCC | VVCC | 11 | 24 | V | Max. value needs to consider internal power losses | 50 | |
| Voltage at pin MFIO | VMFIO | -0.3 | 3.3 | V | 50 | ||
| Voltage at pin FB | VFB | -0.3 | 3.3 | V | 50 | ||
| Voltage at pin ZCD | VZCD | -0.3 | 3.3 | V | 50 | ||
| Voltage at pin CS | VCS | -0.3 | 3.3 | V | 50 | ||
| Total current out of pins FB and MFIO | -IFB-IMFIO | 0.63 | mA | During sleep phase in burst mode | 50 | ||
| Low state output reverse current at pin LSGD | -ILSGDLREV | 100 | mA | Applies if VLSGD < 0 V and driver at low state | 51 | ||
| Voltage at pin HSVCC | VHSVCC | 10 | 24 | V | Referred to HSGND | 51 | |
| UART Baudrate at pin MFIO | tBD | 10 | 115 | kBd | 51 | ||
| Voltage at pin PFCVS | VPFCVS | -0.3 | 3.3 | V | 51 | ||
| Voltage at pin PFCCS | VPFCCS | -0.3 | 3.3 | V | 51 | ||
| Thermal resistance from junction to ambient | RthJA | 119 | K/W | 50 | |||
| HV VCC charge current capability | IHVchargeVCC | 2.4 | 5 | 7.5 | mA | VVCC = 1 V, VHV = 30 V; peak current limited in application by external resistor | 51 |
| Leakage current at HV pin | IHVLK | 10 | μA | VHV = 600 V, HV start-up cell disabled | 52 | ||
| VCC turn-on threshold | VVCCon | 19 | 20.5 | 22 | V | Rising slope | 52 |
| VCC turn-off threshold | VVCCoff | 7.98 | 8.4 | 8.82 | V | Falling slope | 52 |
| Threshold to activate HV cell for VCC-supply during burst mode | VVCCslpHVon | 9.97 | 10.5 | 11.03 | V | Falling slope | 52 |
| VCC overvoltage protection threshold | VVCCOVP | 22 | 23 | 24 | V | 52 | |
| Supply current | IVCCopnm | 11 | 14.5 | mA | Without gate driver gate charge losses and during brown-in phase | 52 | |
| Quiescent current during burst mode power saving-phase | IVCCBMpsm0 | 0.7 | 3.4 | mA | Burst mode entered; pin MFIO and FB open | 52 | |
| Quiescent current during bang-bang mode | IVCCBB | 0.32 | 0.58 | mA | Protection mode entered; pin MFIO and FB open | 52 | |
| HSVCC turn-on threshold | VHSVCCon | 8.7 | 9.2 | 9.7 | V | Rising slope | 52 |
| HSVCC turn-off threshold | VHSVCCoff | 6.2 | 6.7 | 7.2 | V | Falling slope | 52 |
| HSGD voltage at high state | VHSGDhigh | 10 | 11 | 12 | V | IHSGD = -20 mA | 53 |
| HSGD driver output low impedance | RHSGDLS | 5 | Ω | IHSGD = 100 mA | 53 | ||
| Second level overvoltage protection (OVP2) threshold | VPFCVSovp2 | 2.7 | 2.8 | 2.9 | V | 53 | |
| Dynamic voltage range | VPFCVS | 0.13 | 2.75 | V | 53 | ||
| Over-current protection (OCP) threshold | VPFCCSocp | 594 | 627 | 660 | mV | 53 | |
| Over-current protection (OCP) blanking time | tPFCCSocp | 37.5 | 47.4 | 58.1 | ns | 53 | |
| Zero-crossing detection threshold | VZCDTHR | 15 | 40 | 70 | mV | Falling slope | 54 |
| Maximum operating current range | VCSTHRmax | 394 | 426 | 458 | mV | 55 | |
| CSPROT threshold | VCSPROT | 550 | 600 | 650 | mV | 55 | |
| Burst mode wake-up threshold | VFBBMctrl | 510 | 581 | 604 | mV | During sleep phase in burst mode | 55 |
| LSGD driver output low impedance | RLSGDLS | 7 | Ω | ILSGD = 100 mA | 55 | ||
| Nominal output high voltage | VPFCGDhigh | 9.9 | 10.5 | 11.1 | V | IPFCGD = -20 mA | 56 |
| Driver output low impedance | RPFCGDLS | 4.4 | Ω | IPFCGD = 100 mA | 56 | ||
| VDDP power supply | VVDDP | 3.04 | 3.2 | 3.36 | V | 56 | |
| VREF reference voltage | VVREF | 2.391 | 2.428 | 2.465 | V | 56 | |
| Main clock oscillation period time base | tMCLK | 15 | 15.8 | 16.6 | ns | 56 | |
| Slow task period time base | tSLWTASK | 111 | 120 | 129 | µs | 56 | |
| Restart step time base for auto-restart mode | tARMbase | 270 | 300 | 336 | ms | ENXcapdischg = Disabled; base for configurable auto-restart time tARMslp when auto-restart mode entered | 56 |
| Restart step time base for auto-restart mode | tARMbase | 27 | 30 | 34 | ms | ENXcapdischg = Enabled; base for configurable auto-restart time tARMslp when auto-restart mode entered | 56 |
| Safe X-capacitor discharge time between AC off and X-capacitor voltage no longer above 60V | tXCapdischg | 2 | s | ENXcapdischg = Enabled, CX,max = 2.0 uF, RHV = 48 ... 54 kΩ, diode drop below 2.0 V | 57 |
CAD (KiCad official)
- Symbol:
XDPS2221XUMA1 - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files:
xdps2221xuma1-etched.step/xdps2221xuma1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xdps2221xuma1.step/xdps2221xuma1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Infineon Technologies datasheet (60 pp, sha256
91a61b9a39bd5faf, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).