main
Ray Publish 0.1.0 8f96de5
{
  "slug": "xd8574ap",
  "version": "0.1.0",
  "type": "component",
  "description": "XINLUDA I/O Expanders, DIP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface",
    "xd8574ap",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "xd8574ap.kicad_sym",
    "xd8574ap.kicad_mod",
    "xd8574ap.glb",
    "xd8574ap.step",
    "xd8574ap.lbr",
    "docs/hero.png",
    "docs/xd8574ap-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "xd8574ap-hero.glb",
    "xd8574ap-hero.overlay.json",
    "xd8574ap-etched.glb"
  ],
  "component": {
    "mpn": "XD8574AP",
    "manufacturer": "XINLUDA",
    "package": "DIP-16",
    "pin_count": 16,
    "category": "Interface",
    "subcategory": "I/O Expanders",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588905733719408640",
    "parts": {
      "symbol": "xd8574ap.kicad_sym",
      "footprint": "xd8574ap.kicad_mod",
      "model_3d": "xd8574ap-hero.glb",
      "model_3d_plain": "xd8574ap-etched.glb",
      "model_3d_step": "xd8574ap-etched.step",
      "model_3d_step_plain": "xd8574ap.step",
      "lbr": "xd8574ap.lbr"
    },
    "distributor_links": {
      "lcsc": "C561268"
    },
    "distributor_check": {
      "checked_at": "2026-10-15T03:30:41Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "A0",
        "type": "input",
        "description": "Hardware address input 0; connect directly to VCC or ground, pull-up resistors are not needed."
      },
      {
        "number": "2",
        "name": "A1",
        "type": "input",
        "description": "Hardware address input 1; connect directly to VCC or ground, pull-up resistors are not needed."
      },
      {
        "number": "3",
        "name": "A2",
        "type": "input",
        "description": "Hardware address input 2; connect directly to VCC or ground, pull-up resistors are not needed."
      },
      {
        "number": "4",
        "name": "P0",
        "type": "bidirectional",
        "description": "Port 0 input/output (listed as push-pull in the pin table); at power-on P0-P7 are configured as inputs."
      },
      {
        "number": "5",
        "name": "P1",
        "type": "bidirectional",
        "description": "Port 1 input/output (listed as push-pull in the pin table); at power-on P0-P7 are configured as inputs."
      },
      {
        "number": "6",
        "name": "P2",
        "type": "bidirectional",
        "description": "Port 2 input/output (listed as push-pull in the pin table); at power-on P0-P7 are configured as inputs."
      },
      {
        "number": "7",
        "name": "P3",
        "type": "bidirectional",
        "description": "Port 3 input/output (listed as push-pull in the pin table); at power-on P0-P7 are configured as inputs."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "Supply ground."
      },
      {
        "number": "9",
        "name": "P4",
        "type": "bidirectional",
        "description": "Port 4 input/output (listed as push-pull in the pin table); at power-on P0-P7 are configured as inputs."
      },
      {
        "number": "10",
        "name": "P5",
        "type": "bidirectional",
        "description": "Port 5 input/output (listed as push-pull in the pin table); at power-on P0-P7 are configured as inputs."
      },
      {
        "number": "11",
        "name": "P6",
        "type": "bidirectional",
        "description": "Port 6 input/output (listed as push-pull in the pin table); at power-on P0-P7 are configured as inputs."
      },
      {
        "number": "12",
        "name": "P7",
        "type": "bidirectional",
        "description": "Port 7 input/output (listed as push-pull in the pin table); at power-on P0-P7 are configured as inputs."
      },
      {
        "number": "13",
        "name": "INT",
        "type": "output",
        "description": "Interrupt output, active LOW; open-drain design, connect to VCC through a pull-up resistor."
      },
      {
        "number": "14",
        "name": "SCL",
        "type": "input",
        "description": "I2C serial clock line; connect to VCC through a pull-up resistor."
      },
      {
        "number": "15",
        "name": "SDA",
        "type": "bidirectional",
        "description": "I2C serial data line; connect to VCC through a pull-up resistor."
      },
      {
        "number": "16",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage; recommended operating range is +2.3 V to +5.5 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Ordering table (page 2) lists XD8574AP as DIP16(300mil), same package as the XL8574A family. Pin num; No N.C. pins exist in the DIP16 column (N.C. pins 3, 8, 13, 18 apply only to SSOP20), so none are li; Pin table describes P0-P7 as 'Push-pull design structure', but the body text (pages 10-12) describes"
        ],
        "pages_sent": 22,
        "cost_usd": 0.094,
        "at": "2026-10-15T03:30:23"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588905733719408640",
        "pages": 22,
        "sha256": "626605a32f9b6519",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "xd8574ap.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          19.177,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "17a30b1f0ab3fd5384a1231e3c63c394888d5b952c542a8c189e023ed3467464",
        "checked": "2026-10-15",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "xd8574ap-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          19.177,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d21a870fc16261cf5a5660d05ba7850bc381581b5177c3d7f18de63c72033649",
        "checked": "2026-10-15",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}