main
History Download
Ray Publish 0.1.0 8f96de5

XD8574AP

XINLUDA · I/O Expanders · DIP-16

XD8574AP from XINLUDA, in a DIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 A0 input Hardware address input 0; connect directly to VCC or ground, pull-up resistors are not needed.
2 A1 input Hardware address input 1; connect directly to VCC or ground, pull-up resistors are not needed.
3 A2 input Hardware address input 2; connect directly to VCC or ground, pull-up resistors are not needed.
4 P0 bidirectional Port 0 input/output (listed as push-pull in the pin table); at power-on P0-P7 are configured as inputs.
5 P1 bidirectional Port 1 input/output (listed as push-pull in the pin table); at power-on P0-P7 are configured as inputs.
6 P2 bidirectional Port 2 input/output (listed as push-pull in the pin table); at power-on P0-P7 are configured as inputs.
7 P3 bidirectional Port 3 input/output (listed as push-pull in the pin table); at power-on P0-P7 are configured as inputs.
8 GND power_in Supply ground.
9 P4 bidirectional Port 4 input/output (listed as push-pull in the pin table); at power-on P0-P7 are configured as inputs.
10 P5 bidirectional Port 5 input/output (listed as push-pull in the pin table); at power-on P0-P7 are configured as inputs.
11 P6 bidirectional Port 6 input/output (listed as push-pull in the pin table); at power-on P0-P7 are configured as inputs.
12 P7 bidirectional Port 7 input/output (listed as push-pull in the pin table); at power-on P0-P7 are configured as inputs.
13 INT output Interrupt output, active LOW; open-drain design, connect to VCC through a pull-up resistor.
14 SCL input I2C serial clock line; connect to VCC through a pull-up resistor.
15 SDA bidirectional I2C serial data line; connect to VCC through a pull-up resistor.
16 VCC power_in Supply voltage; recommended operating range is +2.3 V to +5.5 V.

Key specifications

Parameter Value
Manufacturer XINLUDA
Package DIP-16
Category Interface
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 2.3 5.5 V VCC(MAX) = 5.5V 4
LOW-level input voltage, SCL, SDA VIL -0.5 V 5
LOW-level input voltage, A2-A0, P7-P0 VIL -0.5 V 5
High-level output current, P7-P0 IOH -1 mA 5
Low-level output current, P7-P0 IOL 25 mA 5
Operating free-air temperature TA -40 85 °C 5
Supply voltage range VCC -0.5 7 V 4
Input pin voltage range VIN -0.5 V see note [2] 4
Output pin voltage range VO -0.5 V see note [2] 4
Input clamp current IIK -20 mA VIN<0 4
Output clamp current IOK -20 mA VO<0 4
Input/output clamp current IIOK -400 400 μA VO<0 or VO>VCC 4
Continuous output low current IOL 50 mA VO = 0 to VCC 4
Continuous output high current IOH -4 mA VO = 0 to VCC 4
Continuous current through GND ICC -100 mA 4
Continuous current through VCC 100 mA 4
Total power dissipation Ptot 400 mW 4
Storage temperature range Tstg -65 150 °C 4
Ambient temperature range Tamb -40 85 °C Operating 4
Supply current, operating mode ICC 40 100 μA I/O = inputs, VIN = VCC or GND, fSCL = 100 kHz, IO = 0, No load; VCC = +5.5V 5
Standby current, standby mode ISTB 2.5 10 μA I/O = inputs, VIN = VCC or GND, fSCL = 0 kHz, IO = 0, No load; VCC = +5.5V 5
Power-on reset voltage, VCC rising VPOR 1.3 2.4 V VIN = VCC or GND, IO = 0, No load; VCC = +5.5V 5
LOW-level input voltage, SCL/SDA VIL -0.5 V VCC 2.3V to 5.5V 5
LOW-level output current, SDA IOL 3 mA VOL = 0.4 V; VCC 2.3V to 5.5V 5
Input leakage current, SCL/SDA IL -1 1 μA VIN = VCC or GND; VCC 2.3V to 5.5V 5
Input capacitance, SCL/SDA CI 3 7 pF VIN = GND; VCC 2.3V to 5.5V 5
LOW-level input voltage, P0-P7 VIL -0.5 V VCC 2.3V to 5.5V 5
LOW-level output current, P0-P7 IOL 10 25 mA VOL = 1.0V; VCC = +5.5V 5
HIGH-level output current, P0-P7 IOH 30 300 μA VOH = GND; VCC = +5.5V 5
HIGH-level input leakage current, P0-P7 ILIH 5 μA VIN = VCC; VCC 2.3V to 5.5V 5
LOW-level input leakage current, P0-P7 ILIL -5 μA VIN = GND; VCC 2.3V to 5.5V 5
Input capacitance, P0-P7 CI 4 10 pF VCC 2.3V to 5.5V 5
Output capacitance, P0-P7 CO 4 10 pF VCC 2.3V to 5.5V 5
LOW-level output current, INT IOL 1.6 mA VOL = 0.4V; VCC 2.3V to 5.5V 5
HIGH-level input leakage current, INT ILIH 5 μA VIN = VCC; VCC 2.3V to 5.5V 5
LOW-level input leakage current, INT ILIL -5 μA VIN = GND; VCC 2.3V to 5.5V 5
LOW-level input voltage, A2-A0 VIL -0.5 V VCC 2.3V to 5.5V 5
HIGH-level input leakage current, A2-A0 ILIH 5 μA VIN = VCC; VCC 2.3V to 5.5V 5
LOW-level input leakage current, A2-A0 ILIL -5 μA VIN = GND; VCC 2.3V to 5.5V 5
SCL clock frequency fSCL 0 100 kHz Standard-mode 6
Free time between STOP and START tBUF 4.7 μs Standard-mode 6
Hold time (repeated) START condition tHD:STA 4 μs Standard-mode 6
Set-up time for repeated START condition tSU:STA 4.7 μs Standard-mode 6
Set-up time for STOP condition tSU:STO 4 μs Standard-mode 6
Data valid acknowledge time tVD:ACK 0 3.4 μs 6
Data hold time tHD:DAT 0 ns Standard-mode 6
Data valid time tVD:DAT 0 3.4 μs 6
Data set-up time tSU:DAT 250 ns Standard-mode 6
LOW period of the SCL clock tLOW 4.7 μs Standard-mode 6
HIGH period of the SCL clock tHIGH 4 μs Standard-mode 6
Fall time of SDA and SCL tf 0.3 μs Standard-mode 6
Rise time of SDA and SCL tr 1 μs Standard-mode 6
Pulse width of spikes suppressed by input filter tsp 50 ns 6
I2C-bus capacitive load Cb 400 pF 6
Output data valid time tpv(Q) 4 μs CL ≤ 100pF 6
Input data set-up time tps(D) 0 μs CL ≤ 100pF 6
Input data hold time tph(D) 4 μs CL ≤ 100pF 6
Interrupt valid time, INT from port tiv(INT_N) 4 μs CL ≤ 100pF 6
Interrupt reset delay time, INT from SCL tirst(INT_N) 4 μs CL ≤ 100pF 6
Package thermal resistance, junction-to-ambient (free air), DIP16 RθJA 48.3 °C/W DIP16 column; minimum pad spacing on FR4 PCB, no air flow 4

CAD (KiCad official)

  • Symbol: XD8574AP
  • Footprint: Package_DIP:DIP-16_W7.62mm
  • 3D model: DIP-16 (KiCad packages3D, STEP)
  • 3D model files: xd8574ap-etched.step / xd8574ap-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); xd8574ap.step / xd8574ap.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: XINLUDA datasheet (22 pp, sha256 626605a32f9b6519, retrieved 2026-10-15, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF