← Commit history

Initial commit: component/xd7219

Ray ·01d2c860b5 ·
2 files changed +299
README.mdadded+60
@@ -0,0 +1,60 @@+# XD7219++**XINLUDA** · Digital Tube Drivers · DIP-24++XD7219 from XINLUDA, in a DIP-24. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | DIN | input | Serial-Data Input; data is loaded into the internal 16-bit shift register on CLK rising edge. |+| 2 | DIG 0 | output | Digit 0 drive line that sinks current from the display common cathode; pulled to V+ when turned off. |+| 3 | DIG 1 | output | Digit 1 drive line that sinks current from the display common cathode; pulled to V+ when turned off. |+| 4 | GND | power_in | Ground connection; both GND pins must be connected. |+| 5 | DIG 2 | output | Digit 2 drive line that sinks current from the display common cathode; pulled to V+ when turned off. |+| 6 | DIG 3 | output | Digit 3 drive line that sinks current from the display common cathode; pulled to V+ when turned off. |+| 7 | DIG 4 | output | Digit 4 drive line that sinks current from the display common cathode; pulled to V+ when turned off. |+| 8 | DIG 5 | output | Digit 5 drive line that sinks current from the display common cathode; pulled to V+ when turned off. |+| 9 | GND | power_in | Ground connection; both GND pins must be connected. |+| 10 | DIG 6 | output | Digit 6 drive line that sinks current from the display common cathode; pulled to V+ when turned off. |+| 11 | DIG 7 | output | Digit 7 drive line that sinks current from the display common cathode; pulled to V+ when turned off. |+| 12 | LOAD | input | Load-Data Input; the last 16 bits of serial data are latched on LOAD rising edge. |+| 13 | CLK | input | Serial-Clock Input; 10MHz maximum rate; data shifts into shift register on CLK rising edge and outputs on falling edge. |+| 14 | SEG A | output | Segment A drive line that sources current to the display; pulled to GND when turned off. |+| 15 | SEG B | output | Segment B drive line that sources current to the display; pulled to GND when turned off. |+| 16 | SEG C | output | Segment C drive line that sources current to the display; pulled to GND when turned off. |+| 17 | SEG D | output | Segment D drive line that sources current to the display; pulled to GND when turned off. |+| 18 | ISET | input | Current setting input; connect to V+ through a resistor (RSET) to set the peak segment current (nominally 100× the ISET pin current). |+| 19 | V+ | power_in | Positive Supply Voltage; connect to +5V nominal (operating range 4.0V to 5.5V per electrical characteristics on Page 3). |+| 20 | SEG E | output | Segment E drive line that sources current to the display; pulled to GND when turned off. |+| 21 | SEG F | output | Segment F drive line that sources current to the display; pulled to GND when turned off. |+| 22 | SEG G | output | Segment G drive line that sources current to the display; pulled to GND when turned off. |+| 23 | DP | output | Decimal Point drive line that sources current to the display; pulled to GND when turned off. |+| 24 | DOUT | output | Serial-Data Output; propagates input data from DIN 16.5 clock cycles later; used for daisy-chaining multiple devices; never high-impedance. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | XINLUDA |+| Package | DIP-24 |+| Category | LED Drivers |+| Pins | 24 |++## CAD (KiCad official)++- Symbol: `XD7219`+- Footprint: `Package_DIP:DIP-24_W7.62mm`+- 3D model: DIP-24 (KiCad packages3D, STEP)+- 3D model files: `xd7219-etched.step` / `xd7219-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `xd7219.step` / `xd7219.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [XINLUDA datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8757990168781836288) (17 pp, sha256 `2c556d81c57578bb`, retrieved 2026-09-22, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/xd7219-datasheet.pdf)
page.jsonadded+239
@@ -0,0 +1,239 @@+{+  "slug": "xd7219",+  "version": "0.1.0",+  "type": "component",+  "description": "XINLUDA Digital Tube Drivers, DIP-24. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "led drivers",+    "xd7219",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "xd7219.kicad_sym",+    "xd7219.kicad_mod",+    "xd7219.glb",+    "xd7219.step",+    "xd7219.lbr",+    "docs/hero.png",+    "docs/xd7219-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "XD7219",+    "manufacturer": "XINLUDA",+    "package": "DIP-24",+    "pin_count": 24,+    "category": "LED Drivers",+    "subcategory": "Digital Tube Drivers",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8757990168781836288",+    "parts": {+      "symbol": "xd7219.kicad_sym",+      "footprint": "xd7219.kicad_mod",+      "model_3d": "xd7219-etched.glb",+      "model_3d_plain": "xd7219.glb",+      "model_3d_step": "xd7219-etched.step",+      "model_3d_step_plain": "xd7219.step",+      "lbr": "xd7219.lbr"+    },+    "distributor_links": {+      "lcsc": "C556285"+    },+    "pins": [+      {+        "number": "1",+        "name": "DIN",+        "type": "input",+        "description": "Serial-Data Input; data is loaded into the internal 16-bit shift register on CLK rising edge."+      },+      {+        "number": "2",+        "name": "DIG 0",+        "type": "output",+        "description": "Digit 0 drive line that sinks current from the display common cathode; pulled to V+ when turned off."+      },+      {+        "number": "3",+        "name": "DIG 1",+        "type": "output",+        "description": "Digit 1 drive line that sinks current from the display common cathode; pulled to V+ when turned off."+      },+      {+        "number": "4",+        "name": "GND",+        "type": "power_in",+        "description": "Ground connection; both GND pins must be connected."+      },+      {+        "number": "5",+        "name": "DIG 2",+        "type": "output",+        "description": "Digit 2 drive line that sinks current from the display common cathode; pulled to V+ when turned off."+      },+      {+        "number": "6",+        "name": "DIG 3",+        "type": "output",+        "description": "Digit 3 drive line that sinks current from the display common cathode; pulled to V+ when turned off."+      },+      {+        "number": "7",+        "name": "DIG 4",+        "type": "output",+        "description": "Digit 4 drive line that sinks current from the display common cathode; pulled to V+ when turned off."+      },+      {+        "number": "8",+        "name": "DIG 5",+        "type": "output",+        "description": "Digit 5 drive line that sinks current from the display common cathode; pulled to V+ when turned off."+      },+      {+        "number": "9",+        "name": "GND",+        "type": "power_in",+        "description": "Ground connection; both GND pins must be connected."+      },+      {+        "number": "10",+        "name": "DIG 6",+        "type": "output",+        "description": "Digit 6 drive line that sinks current from the display common cathode; pulled to V+ when turned off."+      },+      {+        "number": "11",+        "name": "DIG 7",+        "type": "output",+        "description": "Digit 7 drive line that sinks current from the display common cathode; pulled to V+ when turned off."+      },+      {+        "number": "12",+        "name": "LOAD",+        "type": "input",+        "description": "Load-Data Input; the last 16 bits of serial data are latched on LOAD rising edge."+      },+      {+        "number": "13",+        "name": "CLK",+        "type": "input",+        "description": "Serial-Clock Input; 10MHz maximum rate; data shifts into shift register on CLK rising edge and outputs on falling edge."+      },+      {+        "number": "14",+        "name": "SEG A",+        "type": "output",+        "description": "Segment A drive line that sources current to the display; pulled to GND when turned off."+      },+      {+        "number": "15",+        "name": "SEG B",+        "type": "output",+        "description": "Segment B drive line that sources current to the display; pulled to GND when turned off."+      },+      {+        "number": "16",+        "name": "SEG C",+        "type": "output",+        "description": "Segment C drive line that sources current to the display; pulled to GND when turned off."+      },+      {+        "number": "17",+        "name": "SEG D",+        "type": "output",+        "description": "Segment D drive line that sources current to the display; pulled to GND when turned off."+      },+      {+        "number": "18",+        "name": "ISET",+        "type": "input",+        "description": "Current setting input; connect to V+ through a resistor (RSET) to set the peak segment current (nominally 100× the ISET pin current)."+      },+      {+        "number": "19",+        "name": "V+",+        "type": "power_in",+        "description": "Positive Supply Voltage; connect to +5V nominal (operating range 4.0V to 5.5V per electrical characteristics on Page 3)."+      },+      {+        "number": "20",+        "name": "SEG E",+        "type": "output",+        "description": "Segment E drive line that sources current to the display; pulled to GND when turned off."+      },+      {+        "number": "21",+        "name": "SEG F",+        "type": "output",+        "description": "Segment F drive line that sources current to the display; pulled to GND when turned off."+      },+      {+        "number": "22",+        "name": "SEG G",+        "type": "output",+        "description": "Segment G drive line that sources current to the display; pulled to GND when turned off."+      },+      {+        "number": "23",+        "name": "DP",+        "type": "output",+        "description": "Decimal Point drive line that sources current to the display; pulled to GND when turned off."+      },+      {+        "number": "24",+        "name": "DOUT",+        "type": "output",+        "description": "Serial-Data Output; propagates input data from DIN 16.5 clock cycles later; used for daisy-chaining multiple devices; never high-impedance."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "3/24 pins cited to the wrong page (name found elsewhere): ['15:SEG B@p6', '21:SEG F@p6', '22:SEG G@p6']"+        ],+        "pages_sent": 17,+        "cost_usd": 0.1942,+        "at": "2026-09-22T03:56:46"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8757990168781836288",+        "pages": 17,+        "sha256": "2c556d81c57578bb",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 24,+        "described": 24,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file