component
XD324
Public Made by Adomby adom
XINLUDA Operational Amplifier, DIP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
XD324
XINLUDA · Operational Amplifier · DIP-14
XD324 from XINLUDA, in a DIP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out 1 | output | Output of amplifier 1; outputs are short-circuit protected and the output voltage range includes the negative supply. |
| 2 | 1IN - | input | Inverting (negative) input of amplifier 1; the common-mode input range extends to the negative supply and must not go below it by more than 0.3 V. |
| 3 | 1IN + | input | Non-inverting (positive) input of amplifier 1; the common-mode range is 0 V to VCC − 1.7 V and either input can go to +32 V without damage. |
| 4 | VCC | power_in | Positive (maximum) power supply; operates from 3.0 V to 32 V single supply (absolute maximum 32 V single supply, 16 V split supplies). |
| 5 | 2IN + | input | Non-inverting (positive) input of amplifier 2; the common-mode range is 0 V to VCC − 1.7 V and either input can go to +32 V without damage. |
| 6 | 2IN - | input | Inverting (negative) input of amplifier 2; the common-mode input range extends to the negative supply and must not go below it by more than 0.3 V. |
| 7 | Out 2 | output | Output of amplifier 2; outputs are short-circuit protected and the output voltage range includes the negative supply. |
| 8 | Out 3 | output | Output of amplifier 3; outputs are short-circuit protected and the output voltage range includes the negative supply. |
| 9 | 3IN - | input | Inverting (negative) input of amplifier 3; the common-mode input range extends to the negative supply and must not go below it by more than 0.3 V. |
| 10 | 3IN + | input | Non-inverting (positive) input of amplifier 3; the common-mode range is 0 V to VCC − 1.7 V and either input can go to +32 V without damage. |
| 11 | VEE,GND | power_in | Negative (lowest) power supply or ground for single-supply operation; all amplifier common-mode and output ranges are referenced to this pin. |
| 12 | 4IN + | input | Non-inverting (positive) input of amplifier 4; the common-mode range is 0 V to VCC − 1.7 V and either input can go to +32 V without damage. |
| 13 | 4IN - | input | Inverting (negative) input of amplifier 4; the common-mode input range extends to the negative supply and must not go below it by more than 0.3 V. |
| 14 | Out 4 | output | Output of amplifier 4; outputs are short-circuit protected and the output voltage range includes the negative supply. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XINLUDA |
| Package | DIP-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply Voltages, Single Supply | VCC | 32 | Vdc | 4 | |||
| Power Supply Voltages, Split Supplies | VCC, VEE | 16 | Vdc | 4 | |||
| Input Common Mode Voltage Range | VICR | -0.3 | 32 | Vdc | 4 | ||
| Input Differential Voltage Range | VIDR | 32 | Vdc | 4 | |||
| Junction Temperature | TJ | 150 | C | 4 | |||
| Storage Temperature Range | Tstg | -50 | 150 | C | 4 | ||
| ESD Protection at any Pin | Vesd | 2000 | V | Human Body Model | 4 | ||
| ESD Protection at any Pin | Vesd | 200 | V | Machine Model | 4 | ||
| Operating Ambient Temperature Range | TA | 0 | 70 | C | XL/XD324, XL324TSS | 4 | |
| Thermal Resistance, Junction-to-Air | RθJA | 118 | C/W | Case 646 (DIP14) | 4 | ||
| Input Offset Voltage | VIO | 2 | 7 | mV | VCC = 5.0 V to 30 V; VICR = 0 V to VCC −1.7 V, VO = 1.4 V, RS = 0 Ω; TA = 25C | 5 | |
| Input Offset Voltage | VIO | 9 | mV | VCC = 5.0 V to 30 V; VICR = 0 V to VCC −1.7 V, VO = 1.4 V, RS = 0 Ω; TA = Thigh to Tlow (Note 4) | 5 | ||
| Input Offset Current | IIO | 5 | 50 | nA | 5 | ||
| Input Offset Current | IIO | 150 | nA | TA = Thigh to Tlow (Note 4) | 5 | ||
| Input Bias Current | IIB | -90 | -250 | nA | 5 | ||
| Input Bias Current | IIB | -500 | nA | TA = Thigh to Tlow (Note 4) | 5 | ||
| Input Common Mode Voltage Range | VICR | 0 | 28.3 | V | VCC = 30 V, TA = +25C | 5 | |
| Input Common Mode Voltage Range | VICR | 0 | 28 | V | VCC = 30 V, TA = Thigh to Tlow (Note 4) | 5 | |
| Large Signal Open Loop Voltage Gain | AVOL | 25 | 100 | V/mV | RL = 2.0 kΩ, VCC = 15 V, for Large VO Swing | 5 | |
| Large Signal Open Loop Voltage Gain | AVOL | 15 | V/mV | RL = 2.0 kΩ, VCC = 15 V, for Large VO Swing; TA = Thigh to Tlow (Note 4) | 5 | ||
| Common Mode Rejection | CMR | 65 | 70 | dB | RS ≤ 10 kΩ | 5 | |
| Power Supply Rejection | PSR | 65 | 100 | dB | 5 | ||
| Output Voltage, High Limit | VOH | 3.3 | 3.5 | V | VCC = 5.0 V, RL = 2.0 kΩ, TA = 25°C | 6 | |
| Output Voltage, High Limit | VOH | 26 | V | VCC = 30 V, RL = 2.0 kΩ, TA = Thigh to Tlow (Note 7) | 6 | ||
| Output Voltage, High Limit | VOH | 27 | 28 | V | VCC = 30 V, RL = 10 kΩ, TA = Thigh to Tlow (Note 7) | 6 | |
| Output Voltage, Low Limit | VOL | 5 | 20 | mV | VCC = 5.0 V, RL = 10 kΩ, TA = Thigh to Tlow (Note 7) | 6 | |
| Output Source Current | IO+ | 20 | 40 | mA | VID = +1.0 V, VCC = 15 V; TA = 25°C | 6 | |
| Output Source Current | IO+ | 10 | 20 | mA | VID = +1.0 V, VCC = 15 V; TA = Thigh to Tlow (Note 7) | 6 | |
| Output Sink Current | IO− | 10 | 20 | mA | VID = −1.0 V, VCC = 15 V; TA = 25°C | 6 | |
| Output Sink Current | IO− | 5 | 8 | mA | VID = −1.0 V, VCC = 15 V; TA = Thigh to Tlow (Note 7) | 6 | |
| Output Sink Current | IO− | 12 | 50 | µA | VID = −1.0 V, VO = 200 mV, TA = 25°C | 6 | |
| Output Short Circuit to Ground | ISC | 40 | 60 | mA | 6 | ||
| Power Supply Current | ICC | 3 | mA | VCC = 30 V, VO = 0 V, RL = (symbol not extracted); TA = Thigh to Tlow (Note 7) | 6 | ||
| Power Supply Current | ICC | 1.2 | mA | VCC = 5.0 V, VO = 0 V, RL = (symbol not extracted); TA = Thigh to Tlow (Note 7) | 6 | ||
| Channel Separation | CS | -120 | dB | 10 kHz ≤ f ≤ 20 kHz, Input Referenced | 5 | ||
| Slew Rate at Unity Gain | SR | 0.5 | V/μs | RL = 1 MΩ, CL = 30 pF, VI = ±10 V (see Figure 5-1) | 4 | ||
| Unity-Gain Bandwidth | B1 | 1.2 | MHz | RL = 1 MΩ, CL = 20 pF (see Figure 5-1) | 4 | ||
| Average Temperature Coefficient of Input Offset Voltage | ΔVIO/ΔT | 7 | µV/C | TA = Thigh to Tlow (Notes 4 and 6) | 5 | ||
| Average Temperature Coefficient of Input Offset Current | ΔIIO/ΔT | 10 | pA/C | TA = Thigh to Tlow (Notes 4 and 6) | 5 |
CAD (KiCad official)
- Symbol:
XD324 - Footprint:
Package_DIP:DIP-14_W7.62mm - 3D model: DIP-14 (KiCad packages3D, STEP)
- 3D model files:
xd324-etched.step/xd324-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xd324.step/xd324.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XINLUDA datasheet (14 pp, sha256
384a39e4ec7d0b3c, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# XD324
**XINLUDA** · Operational Amplifier · DIP-14
XD324 from XINLUDA, in a DIP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out 1 | output | Output of amplifier 1; outputs are short-circuit protected and the output voltage range includes the negative supply. |
| 2 | 1IN - | input | Inverting (negative) input of amplifier 1; the common-mode input range extends to the negative supply and must not go below it by more than 0.3 V. |
| 3 | 1IN + | input | Non-inverting (positive) input of amplifier 1; the common-mode range is 0 V to VCC − 1.7 V and either input can go to +32 V without damage. |
| 4 | VCC | power_in | Positive (maximum) power supply; operates from 3.0 V to 32 V single supply (absolute maximum 32 V single supply, 16 V split supplies). |
| 5 | 2IN + | input | Non-inverting (positive) input of amplifier 2; the common-mode range is 0 V to VCC − 1.7 V and either input can go to +32 V without damage. |
| 6 | 2IN - | input | Inverting (negative) input of amplifier 2; the common-mode input range extends to the negative supply and must not go below it by more than 0.3 V. |
| 7 | Out 2 | output | Output of amplifier 2; outputs are short-circuit protected and the output voltage range includes the negative supply. |
| 8 | Out 3 | output | Output of amplifier 3; outputs are short-circuit protected and the output voltage range includes the negative supply. |
| 9 | 3IN - | input | Inverting (negative) input of amplifier 3; the common-mode input range extends to the negative supply and must not go below it by more than 0.3 V. |
| 10 | 3IN + | input | Non-inverting (positive) input of amplifier 3; the common-mode range is 0 V to VCC − 1.7 V and either input can go to +32 V without damage. |
| 11 | VEE,GND | power_in | Negative (lowest) power supply or ground for single-supply operation; all amplifier common-mode and output ranges are referenced to this pin. |
| 12 | 4IN + | input | Non-inverting (positive) input of amplifier 4; the common-mode range is 0 V to VCC − 1.7 V and either input can go to +32 V without damage. |
| 13 | 4IN - | input | Inverting (negative) input of amplifier 4; the common-mode input range extends to the negative supply and must not go below it by more than 0.3 V. |
| 14 | Out 4 | output | Output of amplifier 4; outputs are short-circuit protected and the output voltage range includes the negative supply. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XINLUDA |
| Package | DIP-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply Voltages, Single Supply | VCC | | | 32 | Vdc | | 4 |
| Power Supply Voltages, Split Supplies | VCC, VEE | | | 16 | Vdc | | 4 |
| Input Common Mode Voltage Range | VICR | -0.3 | | 32 | Vdc | | 4 |
| Input Differential Voltage Range | VIDR | | | 32 | Vdc | | 4 |
| Junction Temperature | TJ | | | 150 | C | | 4 |
| Storage Temperature Range | Tstg | -50 | | 150 | C | | 4 |
| ESD Protection at any Pin | Vesd | | | 2000 | V | Human Body Model | 4 |
| ESD Protection at any Pin | Vesd | | | 200 | V | Machine Model | 4 |
| Operating Ambient Temperature Range | TA | 0 | | 70 | C | XL/XD324, XL324TSS | 4 |
| Thermal Resistance, Junction-to-Air | RθJA | | 118 | | C/W | Case 646 (DIP14) | 4 |
| Input Offset Voltage | VIO | | 2 | 7 | mV | VCC = 5.0 V to 30 V; VICR = 0 V to VCC −1.7 V, VO = 1.4 V, RS = 0 Ω; TA = 25C | 5 |
| Input Offset Voltage | VIO | | | 9 | mV | VCC = 5.0 V to 30 V; VICR = 0 V to VCC −1.7 V, VO = 1.4 V, RS = 0 Ω; TA = Thigh to Tlow (Note 4) | 5 |
| Input Offset Current | IIO | | 5 | 50 | nA | | 5 |
| Input Offset Current | IIO | | | 150 | nA | TA = Thigh to Tlow (Note 4) | 5 |
| Input Bias Current | IIB | | -90 | -250 | nA | | 5 |
| Input Bias Current | IIB | | | -500 | nA | TA = Thigh to Tlow (Note 4) | 5 |
| Input Common Mode Voltage Range | VICR | 0 | | 28.3 | V | VCC = 30 V, TA = +25C | 5 |
| Input Common Mode Voltage Range | VICR | 0 | | 28 | V | VCC = 30 V, TA = Thigh to Tlow (Note 4) | 5 |
| Large Signal Open Loop Voltage Gain | AVOL | 25 | 100 | | V/mV | RL = 2.0 kΩ, VCC = 15 V, for Large VO Swing | 5 |
| Large Signal Open Loop Voltage Gain | AVOL | 15 | | | V/mV | RL = 2.0 kΩ, VCC = 15 V, for Large VO Swing; TA = Thigh to Tlow (Note 4) | 5 |
| Common Mode Rejection | CMR | 65 | 70 | | dB | RS ≤ 10 kΩ | 5 |
| Power Supply Rejection | PSR | 65 | 100 | | dB | | 5 |
| Output Voltage, High Limit | VOH | 3.3 | 3.5 | | V | VCC = 5.0 V, RL = 2.0 kΩ, TA = 25°C | 6 |
| Output Voltage, High Limit | VOH | 26 | | | V | VCC = 30 V, RL = 2.0 kΩ, TA = Thigh to Tlow (Note 7) | 6 |
| Output Voltage, High Limit | VOH | 27 | 28 | | V | VCC = 30 V, RL = 10 kΩ, TA = Thigh to Tlow (Note 7) | 6 |
| Output Voltage, Low Limit | VOL | | 5 | 20 | mV | VCC = 5.0 V, RL = 10 kΩ, TA = Thigh to Tlow (Note 7) | 6 |
| Output Source Current | IO+ | 20 | 40 | | mA | VID = +1.0 V, VCC = 15 V; TA = 25°C | 6 |
| Output Source Current | IO+ | 10 | 20 | | mA | VID = +1.0 V, VCC = 15 V; TA = Thigh to Tlow (Note 7) | 6 |
| Output Sink Current | IO− | 10 | 20 | | mA | VID = −1.0 V, VCC = 15 V; TA = 25°C | 6 |
| Output Sink Current | IO− | 5 | 8 | | mA | VID = −1.0 V, VCC = 15 V; TA = Thigh to Tlow (Note 7) | 6 |
| Output Sink Current | IO− | 12 | 50 | | µA | VID = −1.0 V, VO = 200 mV, TA = 25°C | 6 |
| Output Short Circuit to Ground | ISC | | 40 | 60 | mA | | 6 |
| Power Supply Current | ICC | | | 3 | mA | VCC = 30 V, VO = 0 V, RL = (symbol not extracted); TA = Thigh to Tlow (Note 7) | 6 |
| Power Supply Current | ICC | | | 1.2 | mA | VCC = 5.0 V, VO = 0 V, RL = (symbol not extracted); TA = Thigh to Tlow (Note 7) | 6 |
| Channel Separation | CS | | -120 | | dB | 10 kHz ≤ f ≤ 20 kHz, Input Referenced | 5 |
| Slew Rate at Unity Gain | SR | | 0.5 | | V/μs | RL = 1 MΩ, CL = 30 pF, VI = ±10 V (see Figure 5-1) | 4 |
| Unity-Gain Bandwidth | B1 | | 1.2 | | MHz | RL = 1 MΩ, CL = 20 pF (see Figure 5-1) | 4 |
| Average Temperature Coefficient of Input Offset Voltage | ΔVIO/ΔT | | 7 | | µV/C | TA = Thigh to Tlow (Notes 4 and 6) | 5 |
| Average Temperature Coefficient of Input Offset Current | ΔIIO/ΔT | | 10 | | pA/C | TA = Thigh to Tlow (Notes 4 and 6) | 5 |
## CAD (KiCad official)
- Symbol: `XD324`
- Footprint: `Package_DIP:DIP-14_W7.62mm`
- 3D model: DIP-14 (KiCad packages3D, STEP)
- 3D model files: `xd324-etched.step` / `xd324-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `xd324.step` / `xd324.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [XINLUDA datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588913898326274048) (14 pp, sha256 `384a39e4ec7d0b3c`, retrieved 2026-10-18, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/xd324-datasheet.pdf)