component

XD17324

Public Made by Adom

by adom

XINLUDA Operational Amplifier, DIP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentamplifiersxd17324factory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Datasheet

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

XD17324

XINLUDA · Operational Amplifier · DIP-14

XD17324 from XINLUDA, in a DIP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Vout1 output Output of amplifier 1.
2 Vin(-)1 power_in Inverting input of amplifier 1; common mode range -0.3 V to +VCC.
3 Vin(+)1 power_in Non-inverting input of amplifier 1; common mode range -0.3 V to +VCC.
4 VCC power_in Positive supply pin; absolute maximum 32 V.
5 Vin(+)2 power_in Non-inverting input of amplifier 2; common mode range -0.3 V to +VCC.
6 Vin(-)2 power_in Inverting input of amplifier 2; common mode range -0.3 V to +VCC.
7 Vout2 output Output of amplifier 2.
8 Vout3 output Output of amplifier 3.
9 Vin(-)3 power_in Inverting input of amplifier 3; common mode range -0.3 V to +VCC.
10 Vin(+)3 power_in Non-inverting input of amplifier 3; common mode range -0.3 V to +VCC.
11 VEE power_in Negative supply / ground pin for single-supply operation.
12 Vin(+)4 power_in Non-inverting input of amplifier 4; common mode range -0.3 V to +VCC.
13 Vin(-)4 power_in Inverting input of amplifier 4; common mode range -0.3 V to +VCC.
14 Vout4 output Output of amplifier 4.

Key specifications

Parameter Value
Manufacturer XINLUDA
Package DIP-14
Category Amplifiers
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power supply voltage VCC 32 V 2
Output sink current Iosink 50 mA 2
Common mode input voltage VCM -0.3 V Printed as -0.3 to +VCC; upper limit is VCC (not numeric) 2
Output voltage Vout -0.3 V Printed as -0.3 to +VCC; upper limit is VCC (not numeric) 2
Allowable power dissipation (DIP) PT 625 mW Allowable up to Ta = 50°C; derate 8.3 mW/°C 2
Operating temperature Topr -40 85 °C 2
Storage temperature Tstg -55 125 °C 2
Input offset voltage VIO 2 7 mV VCM = 7.5 V, RS = 50 Ω, Rf = 50 kΩ 3
Input offset current IIO 5 50 nA VCM = 7.5 V, IIO = /II (-), II (+)/ 3
Input bias current IIB 30 500 nA VCM = 7.5 V 3
Power source rejection ratio PSRR 93 dB f = 100 Hz, RS = 1 kΩ, Rj = 100 kΩ 3
Voltage gain AVD 75 90 dB RS = 1 kΩ, Rf = 100 kΩ, RL = ∞ 3
Common mode rejection ratio CMR 80 dB RS = 50 Ω, Rf = 5 kΩ 3
Common mode input voltage range VCM -0.3 13.5 V RS = 1 kΩ, Rf = 100 kΩ, f = 100 Hz 3
Maximum output voltage VOP-P 13.6 V f = 100 Hz, RS = 1 kΩ, Rf = 100 kΩ, RL = 20 kΩ 3
Output source current Iosource 20 40 mA VIN+ = 1 V, VIN- = 0 V, VOH = 10 V 3
Output sink current Iosink 10 20 mA VIN = 0 V, VIN = 1 V, VOL = 2.5 V 3
Supply current ICC 0.8 2 mA VIN = GND, RL = ∞ 3
Slew rate SR 0.19 V/µs f = 1.5 kHz, VCM = 7.5 V, RL = ∞ 3
Channel separation CS 120 dB f = 1 kHz 3
Output sink current Iosink 15 50 µA VIN+ = 0 V, VIN- = 1 V, VOL = 200 mV 3
Output sink current Iosink 3 9 mA VIN+ = 0 V, VIN- = 1 V, VOL = 1 V 3
Output voltage high VOH1 13.2 13.6 V IOH = -1 mA 3
Output voltage high VOH2 12 13.3 V IOH = -10 mA 3
Output voltage low VOL1 0.8 1 V IOL = 1 mA 3
Output voltage low VOL2 1.1 1.8 V IOL = 10 mA 3

CAD (KiCad official)

  • Symbol: XD17324
  • Footprint: Package_DIP:DIP-14_W7.62mm
  • 3D model: DIP-14 (KiCad packages3D, STEP)
  • 3D model files: xd17324-etched.step / xd17324-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); xd17324.step / xd17324.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: XINLUDA datasheet (6 pp, sha256 dcac9b95ab9c4c96, retrieved 2026-10-28, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF