main
Ray
Publish 0.1.0
c233859
XC9280A75CYR-G
Torex Semicon · DC-DC Converters · TSOT-23-6
XC9280A75CYR-G from Torex Semicon, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin for the IC, which must be connected to the system ground. |
| 2 | LX | output | Switching output that drives the external inductor; the Lx pin voltage is rated at -0.3 to VIN+0.3 or 20 V, and the Lx pin current is rated at 6.0 A absolute maximum. |
| 3 | VIN | power_in | Power input pin with an absolute maximum rating of -0.3 to 20 V, and an operating input voltage range of 4.5 V to 18 V. |
| 4 | FB | input | Output voltage sense input, rated at -0.3 to 6.2 V absolute maximum, with output set by external resistors RFB1 and RFB2. |
| 5 | EN/SS | input | Enable and soft-start pin where H is active and L is stand-by, and it must not be left open because the state is then undefined. |
| 6 | BST | power_out | Bootstrap pin for the high-side driver, rated at VLX-0.3 to VLX+6.2 V absolute maximum and used with a 0.1 µF bootstrap capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Torex Semicon |
| Package | TSOT-23-6 |
| Category | Power Supply Chip |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN Pin Voltage | VIN | -0.3 | 20 | V | 4 | ||
| EN/SS Pin Voltage | VEN/SS | -0.3 | 20 | V | 4 | ||
| FB Pin Voltage | VFB | -0.3 | 6.2 | V | 4 | ||
| Lx Pin Current | ILx | 6 | A | 4 | |||
| Power Dissipation TSOT-26 | Pd | 1300 | mW | Ta=25℃, PCB mounted, high heat dissipation board, reference only | 4 | ||
| Operating Ambient Temperature | Topr | -40 | 105 | ℃ | 4 | ||
| Storage Temperature | Tstg | -55 | 125 | ℃ | 4 | ||
| Setting Output Voltage Range | VOUTSET | 1.8 | 7 | V | Maximum is 7.0 or VIN x 0.7 (lowest); VOUT/VIN ≧ 0.136 | 5 | |
| Operating Input Voltage Range | VIN | 4.5 | 18 | V | 5 | ||
| FB Voltage | VFB | 0.739 | 0.75 | 0.761 | V | VFB=0.761V → 0.739V, VFB voltage when Lx pin oscillates | 5 |
| UVLO Detect Voltage | VUVLOD | 2.7 | 3.33 | V | VIN:4.4V→2.7V、VFB=0.675V | 5 | |
| UVLO Release Voltage | VUVLOR | 3.38 | 4.4 | V | VIN:2.7V→4.4V、VFB=0.675V | 5 | |
| Quiescent Current | Iq | 80 | 180 | μA | VIN=VEN/SS=12V、VFB=0.825V、VLX=0V | 5 | |
| Stand-by Current | ISTBY | 3 | 6 | μA | VIN=12V、VEN/SS=VFB=VLX=0V | 5 | |
| Oscillation Frequency | fOSC | 1 | 1.2 | 1.4 | MHz | Connected to external components, VIN=VEN/SS=6.0V、VFB=0.675V | 5 |
| Maximum Duty Cycle | DMAX | 75 | 90 | % | Connected to external components, VIN=VEN/SS=6.0V、VFB=0.675V | 5 | |
| Lx SW H On Resistance | RLxH | 166 | mΩ | Design reference value, provided for reference only (*2) | 5 | ||
| Lx SW L On Resistance | RLxL | 130 | mΩ | VFB=5.5V、ILX=100mA | 5 | ||
| Lx SW H Off Current | ILXH | -1 | μA | VIN=18V、VEN/SS=0V、VFB=1.5V、VLX=6.0V、VBST=VLX+5.0V | 5 | ||
| Lx SW L Off Current | ILXL | 1 | μA | VIN=18V、VEN/SS=VFB=VLX=0V | 5 | ||
| Current Limit | ILIM | 5.1 | A | 5 | |||
| PFM Switch Current | IPFM | 1.2 | A | Connected to external components, VIN=12V、VOUT=5.0V、IOUT=1mA | 5 | ||
| Internal Soft-Start Time | tSS1 | 0.95 | ms | VFB=0.675V | 5 | ||
| External Soft-Start Time | tSS2 | 26 | ms | VFB=0.675V、RSS=430kΩ、CSS=0.47μF | 5 | ||
| Efficiency | EFFI | 90 | % | Connected to external components, VIN=12V、VOUT=5.0V、IOUT=1.0A | 5 | ||
| FB Voltage Temperature Characteristics | ΔVFB/(ΔTopr・VFB) | -100 | 100 | ppm/℃ | -40℃≦Topr≦105℃ | 5 | |
| FB H Current | IFBH | -0.1 | 0.1 | μA | VIN=VEN/SS=18V、VFB=3.0V、VLX=0V | 6 | |
| FB L Current | IFBL | -0.1 | 0.1 | μA | VIN=VEN/SS=18V、VFB=VLX=0V | 6 | |
| EN/SS H Voltage | VEN/SSH | 2.5 | 18 | V | VIN=18V、VFB=0.71V | 6 | |
| EN/SS L Voltage | VEN/SSL | 0.3 | V | VIN=18V、VFB=1.5V | 6 | ||
| EN/SS H Current | IEN/SSH | 0.1 | 0.3 | μA | VIN=VEN/SS=18V、VFB=1.5V、VLX=0V | 6 | |
| EN/SS L Current | IEN/SSL | -0.1 | 0.1 | μA | VIN=18V、VEN/SS=VFB=VLX=0V | 6 | |
| Thermal Shutdown Temperature | TTSD | 150 | ℃ | Junction Temperature | 6 | ||
| Thermal Shutdown Hysteresis Width | THYS | 10 | ℃ | Junction Temperature | 6 | ||
| Thermal Resistance Junction-to-Ambient | θJA | 64 | ℃/W | Reference pattern layout, 4 layer board 50mm×60mm, FR-4 1.6mm | 15 | ||
| Maximum Operating Junction Temperature | Tj | 125 | ℃ | Operating junction temperature | 15 |
CAD (KiCad official)
- Symbol:
XC9280A75CYR-G - Footprint:
Package_TO_SOT_SMD:TSOT-23-6 - 3D model: TSOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
xc9280a75cyr-g-etched.step/xc9280a75cyr-g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xc9280a75cyr-g.step/xc9280a75cyr-g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Torex Semicon datasheet (28 pp, sha256
8fba04b1d67566ca, retrieved 2026-11-02, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# XC9280A75CYR-G
**Torex Semicon** · DC-DC Converters · TSOT-23-6
XC9280A75CYR-G from Torex Semicon, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin for the IC, which must be connected to the system ground. |
| 2 | LX | output | Switching output that drives the external inductor; the Lx pin voltage is rated at -0.3 to VIN+0.3 or 20 V, and the Lx pin current is rated at 6.0 A absolute maximum. |
| 3 | VIN | power_in | Power input pin with an absolute maximum rating of -0.3 to 20 V, and an operating input voltage range of 4.5 V to 18 V. |
| 4 | FB | input | Output voltage sense input, rated at -0.3 to 6.2 V absolute maximum, with output set by external resistors RFB1 and RFB2. |
| 5 | EN/SS | input | Enable and soft-start pin where H is active and L is stand-by, and it must not be left open because the state is then undefined. |
| 6 | BST | power_out | Bootstrap pin for the high-side driver, rated at VLX-0.3 to VLX+6.2 V absolute maximum and used with a 0.1 µF bootstrap capacitor. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Torex Semicon |
| Package | TSOT-23-6 |
| Category | Power Supply Chip |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN Pin Voltage | VIN | -0.3 | | 20 | V | | 4 |
| EN/SS Pin Voltage | VEN/SS | -0.3 | | 20 | V | | 4 |
| FB Pin Voltage | VFB | -0.3 | | 6.2 | V | | 4 |
| Lx Pin Current | ILx | | | 6 | A | | 4 |
| Power Dissipation TSOT-26 | Pd | | | 1300 | mW | Ta=25℃, PCB mounted, high heat dissipation board, reference only | 4 |
| Operating Ambient Temperature | Topr | -40 | | 105 | ℃ | | 4 |
| Storage Temperature | Tstg | -55 | | 125 | ℃ | | 4 |
| Setting Output Voltage Range | VOUTSET | 1.8 | | 7 | V | Maximum is 7.0 or VIN x 0.7 (lowest); VOUT/VIN ≧ 0.136 | 5 |
| Operating Input Voltage Range | VIN | 4.5 | | 18 | V | | 5 |
| FB Voltage | VFB | 0.739 | 0.75 | 0.761 | V | VFB=0.761V → 0.739V, VFB voltage when Lx pin oscillates | 5 |
| UVLO Detect Voltage | VUVLOD | 2.7 | 3.33 | | V | VIN:4.4V→2.7V、VFB=0.675V | 5 |
| UVLO Release Voltage | VUVLOR | | 3.38 | 4.4 | V | VIN:2.7V→4.4V、VFB=0.675V | 5 |
| Quiescent Current | Iq | | 80 | 180 | μA | VIN=VEN/SS=12V、VFB=0.825V、VLX=0V | 5 |
| Stand-by Current | ISTBY | | 3 | 6 | μA | VIN=12V、VEN/SS=VFB=VLX=0V | 5 |
| Oscillation Frequency | fOSC | 1 | 1.2 | 1.4 | MHz | Connected to external components, VIN=VEN/SS=6.0V、VFB=0.675V | 5 |
| Maximum Duty Cycle | DMAX | 75 | 90 | | % | Connected to external components, VIN=VEN/SS=6.0V、VFB=0.675V | 5 |
| Lx SW H On Resistance | RLxH | | | 166 | mΩ | Design reference value, provided for reference only (*2) | 5 |
| Lx SW L On Resistance | RLxL | | 130 | | mΩ | VFB=5.5V、ILX=100mA | 5 |
| Lx SW H Off Current | ILXH | -1 | | | μA | VIN=18V、VEN/SS=0V、VFB=1.5V、VLX=6.0V、VBST=VLX+5.0V | 5 |
| Lx SW L Off Current | ILXL | | | 1 | μA | VIN=18V、VEN/SS=VFB=VLX=0V | 5 |
| Current Limit | ILIM | | | 5.1 | A | | 5 |
| PFM Switch Current | IPFM | | 1.2 | | A | Connected to external components, VIN=12V、VOUT=5.0V、IOUT=1mA | 5 |
| Internal Soft-Start Time | tSS1 | | 0.95 | | ms | VFB=0.675V | 5 |
| External Soft-Start Time | tSS2 | | 26 | | ms | VFB=0.675V、RSS=430kΩ、CSS=0.47μF | 5 |
| Efficiency | EFFI | | 90 | | % | Connected to external components, VIN=12V、VOUT=5.0V、IOUT=1.0A | 5 |
| FB Voltage Temperature Characteristics | ΔVFB/(ΔTopr・VFB) | -100 | | 100 | ppm/℃ | -40℃≦Topr≦105℃ | 5 |
| FB H Current | IFBH | -0.1 | | 0.1 | μA | VIN=VEN/SS=18V、VFB=3.0V、VLX=0V | 6 |
| FB L Current | IFBL | -0.1 | | 0.1 | μA | VIN=VEN/SS=18V、VFB=VLX=0V | 6 |
| EN/SS H Voltage | VEN/SSH | 2.5 | | 18 | V | VIN=18V、VFB=0.71V | 6 |
| EN/SS L Voltage | VEN/SSL | | | 0.3 | V | VIN=18V、VFB=1.5V | 6 |
| EN/SS H Current | IEN/SSH | | 0.1 | 0.3 | μA | VIN=VEN/SS=18V、VFB=1.5V、VLX=0V | 6 |
| EN/SS L Current | IEN/SSL | -0.1 | | 0.1 | μA | VIN=18V、VEN/SS=VFB=VLX=0V | 6 |
| Thermal Shutdown Temperature | TTSD | | 150 | | ℃ | Junction Temperature | 6 |
| Thermal Shutdown Hysteresis Width | THYS | | 10 | | ℃ | Junction Temperature | 6 |
| Thermal Resistance Junction-to-Ambient | θJA | | 64 | | ℃/W | Reference pattern layout, 4 layer board 50mm×60mm, FR-4 1.6mm | 15 |
| Maximum Operating Junction Temperature | Tj | | | 125 | ℃ | Operating junction temperature | 15 |
## CAD (KiCad official)
- Symbol: `XC9280A75CYR-G`
- Footprint: `Package_TO_SOT_SMD:TSOT-23-6`
- 3D model: TSOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `xc9280a75cyr-g-etched.step` / `xc9280a75cyr-g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `xc9280a75cyr-g.step` / `xc9280a75cyr-g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Torex Semicon datasheet](docs/xc9280a75cyr-g-datasheet.pdf) (28 pp, sha256 `8fba04b1d67566ca`, retrieved 2026-11-02, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/xc9280a75cyr-g-datasheet.pdf)