# XC7SET125GM

**Nexperia** · Buffers, Drivers, Receivers, Transceivers · XSON-6(1x1.5)

XC7SET125GM from Nexperia, in a XSON-6(1x1.5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Output enable input; a HIGH at OE causes the output to assume a high-impedance OFF-state. |
| 2 | A | input | Data input with TTL input levels; the datasheet specifies VI from 0 V to 5.5 V and VIH minimum 2.0 V, VIL maximum 0.8 V at VCC = 4.5 V to 5.5 V. |
| 3 | GND | power_in | Ground (0 V) reference for all voltages. |
| 4 | Y | tri_state | Data output of the 3-state buffer; IO is limited to ±25 mA between -0.5 V and VCC + 0.5 V. |
| 5 | n.c. | unconnected | Not connected. |
| 6 | VCC | power_in | Supply voltage, recommended 4.5 V to 5.5 V (typical 5.0 V), absolute maximum 7.0 V. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Nexperia |
| Package | XSON-6(1x1.5) |
| Category | Logic |
| Pins | 6 |

## Electrical characteristics

Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).

| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| supply voltage | VCC | -0.5 |  | 7 | V |  | 3 |
| input voltage | VI | -0.5 |  | 7 | V |  | 3 |
| input clamping current | IIK | -20 |  |  | mA | VI < -0.5 V | 3 |
| output clamping current | IOK | -20 |  | 20 | mA | VO < -0.5 V or VO > VCC + 0.5 V | 3 |
| output current | IO | -25 |  | 25 | mA | -0.5 V < VO < VCC + 0.5 V | 3 |
| supply current | ICC |  |  | 75 | mA |  | 3 |
| ground current | IGND | -75 |  |  | mA |  | 3 |
| storage temperature | Tstg | -65 |  | 150 | °C |  | 3 |
| total power dissipation | Ptot |  |  | 250 | mW | Tamb = -40 °C to +125 °C; SOT886 (XSON6) derates 3.3 mW/K above 74 °C | 3 |
| supply voltage | VCC | 4.5 | 5 | 5.5 | V |  | 3 |
| input voltage | VI | 0 |  | 5.5 | V |  | 3 |
| output voltage | VO | 0 |  |  | V |  | 3 |
| ambient temperature | Tamb | -40 | 25 | 125 | °C |  | 3 |
| input transition rise and fall rate | Δt/ΔV |  |  | 20 | ns/V |  | 3 |
| HIGH-level input voltage | VIH | 2 |  |  | V | VCC = 4.5 V to 5.5 V; Tamb 25 °C | 4 |
| LOW-level input voltage | VIL |  |  | 0.8 | V | VCC = 4.5 V to 5.5 V; Tamb 25 °C | 4 |
| HIGH-level output voltage | VOH | 4.4 | 4.5 |  | V | VI = VIH or VIL; VCC = 4.5 V; IO = -50 μA; Tamb 25 °C | 4 |
| HIGH-level output voltage | VOH | 4.4 |  |  | V | VI = VIH or VIL; VCC = 4.5 V; IO = -50 μA; Tamb -40 °C to +125 °C | 4 |
| HIGH-level output voltage | VOH | 3.94 |  |  | V | VI = VIH or VIL; VCC = 4.5 V; IO = -8.0 mA; Tamb 25 °C | 4 |
| HIGH-level output voltage | VOH | 3.7 |  |  | V | VI = VIH or VIL; VCC = 4.5 V; IO = -8.0 mA; Tamb -40 °C to +125 °C | 4 |
| LOW-level output voltage | VOL |  | 0 | 0.1 | V | VI = VIH or VIL; VCC = 4.5 V; IO = 50 μA; Tamb 25 °C | 4 |
| LOW-level output voltage | VOL |  |  | 0.1 | V | VI = VIH or VIL; VCC = 4.5 V; IO = 50 μA; Tamb -40 °C to +125 °C | 4 |
| LOW-level output voltage | VOL |  |  | 0.36 | V | VI = VIH or VIL; VCC = 4.5 V; IO = 8.0 mA; Tamb 25 °C | 4 |
| LOW-level output voltage | VOL |  |  | 0.55 | V | VI = VIH or VIL; VCC = 4.5 V; IO = 8.0 mA; Tamb -40 °C to +125 °C | 4 |
| OFF-state output current | IOZ |  |  | 0.25 | μA | VI = VCC or GND; VCC = 5.5 V; Tamb 25 °C | 4 |
| OFF-state output current | IOZ |  |  | 10 | μA | VI = VCC or GND; VCC = 5.5 V; Tamb -40 °C to +125 °C | 4 |
| input leakage current | II |  |  | 0.1 | μA | VI = 5.5 V or GND; VCC = 0 V to 5.5 V; Tamb 25 °C | 4 |
| input leakage current | II |  |  | 2 | μA | VI = 5.5 V or GND; VCC = 0 V to 5.5 V; Tamb -40 °C to +125 °C | 4 |
| supply current | ICC |  |  | 1 | μA | VI = VCC or GND; IO = 0 A; VCC = 5.5 V; Tamb 25 °C | 4 |
| supply current | ICC |  |  | 40 | μA | VI = VCC or GND; IO = 0 A; VCC = 5.5 V; Tamb -40 °C to +125 °C | 4 |
| additional supply current | ΔICC |  |  | 1.35 | mA | per input pin; VI = 3.4 V; other inputs at VCC or GND; IO = 0 A; VCC = 5.5 V; Tamb 25 °C | 4 |
| additional supply current | ΔICC |  |  | 1.5 | mA | per input pin; VI = 3.4 V; other inputs at VCC or GND; IO = 0 A; VCC = 5.5 V; Tamb -40 °C to +125 °C | 4 |
| input capacitance | CI |  | 1.5 | 10 | pF | Tamb 25 °C | 4 |
| input capacitance | CI |  |  | 10 | pF | Tamb -40 °C to +125 °C | 4 |
| propagation delay A to Y | tpd |  | 3.4 | 5.5 | ns | VCC = 4.5 V to 5.5 V; CL = 15 pF; Tamb 25 °C | 5 |
| propagation delay A to Y | tpd | 1 |  | 7 | ns | VCC = 4.5 V to 5.5 V; CL = 15 pF; Tamb -40 °C to +125 °C | 5 |
| propagation delay A to Y | tpd |  | 4.8 | 7.5 | ns | VCC = 4.5 V to 5.5 V; CL = 50 pF; Tamb 25 °C | 5 |
| propagation delay A to Y | tpd | 1 |  | 9.5 | ns | VCC = 4.5 V to 5.5 V; CL = 50 pF; Tamb -40 °C to +125 °C | 5 |
| enable time OE to Y | ten |  | 3.9 | 5.1 | ns | VCC = 4.5 V to 5.5 V; CL = 15 pF; Tamb 25 °C | 5 |
| enable time OE to Y | ten | 1 |  | 6.5 | ns | VCC = 4.5 V to 5.5 V; CL = 15 pF; Tamb -40 °C to +125 °C | 5 |
| enable time OE to Y | ten |  | 5.1 | 7.5 | ns | VCC = 4.5 V to 5.5 V; CL = 50 pF; Tamb 25 °C | 5 |
| enable time OE to Y | ten | 1 |  | 9.5 | ns | VCC = 4.5 V to 5.5 V; CL = 50 pF; Tamb -40 °C to +125 °C | 5 |
| disable time OE to Y | tdis |  | 4.5 | 6.8 | ns | VCC = 4.5 V to 5.5 V; CL = 15 pF; Tamb 25 °C | 5 |
| disable time OE to Y | tdis | 1 |  | 8.5 | ns | VCC = 4.5 V to 5.5 V; CL = 15 pF; Tamb -40 °C to +125 °C | 5 |
| disable time OE to Y | tdis |  | 6.1 | 8.8 | ns | VCC = 4.5 V to 5.5 V; CL = 50 pF; Tamb 25 °C | 5 |
| disable time OE to Y | tdis | 1 |  | 11 | ns | VCC = 4.5 V to 5.5 V; CL = 50 pF; Tamb -40 °C to +125 °C | 5 |
| power dissipation capacitance | CPD |  | 11 |  | pF | per buffer; CL = 50 pF; f = 1 MHz; VI = GND to VCC | 5 |

## CAD (KiCad official)

- Symbol: `XC7SET125GM`
- Footprint: `Package_SON:Texas_USON-6_1x1.45mm_P0.5mm_SMD`
- 3D model: XSON-6(1x1.5) (KiCad packages3D, STEP)
- 3D model files: `xc7set125gm-etched.step` / `xc7set125gm-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `xc7set125gm.step` / `xc7set125gm.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Nexperia datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588915268336685056) (13 pp, sha256 `3ac5152b59406f8f`, retrieved 2026-10-21, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/xc7set125gm-datasheet.pdf)