component
XC6901D501MR-G
Public Made by Adomby adom
Torex Semicon Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-25-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
XC6901D501MR-G
Torex Semicon · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-25-5
XC6901D501MR-G from Torex Semicon, in a SOT-25-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference pin; all absolute maximum ratings and electrical characteristics are specified with GND = 0V. |
| 2 | -VIN | power_in | Negative supply input; the datasheet gives an input range of -2.4V to -12.4V (VCE = 3.6V) and an absolute maximum range of GND-18+VCE to GND+0.3V. |
| 3 | CE | input | ON/OFF control, active high: a level of 1.2V to 3.6V enables the regulator, GND to 0.4V puts it in stand-by, and an open pin also gives stand-by due to the internal pull-down; the absolute maximum CE voltage is GND-0.3V to VIN+18V. |
| 4 | NC | unconnected | No connection. |
| 5 | -VOUT | power_out | Negative regulated output (-5.0V nominal for this -5.0V part) with a maximum output current of 200mA; the absolute maximum output voltage range is -VIN-0.3V to GND+0.3V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Torex Semicon |
| Package | SOT-25-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (accuracy, VOUT(E)/VOUT(T), multiplier as printed) | VOUT(E) | 0.985 | 1.015 | ×VOUT(T) | VOUT(T)<-2.0V, IOUT=20mA (printed as ×0.985 MIN, ×1.015 MAX) | 6 | |
| Maximum Output Current | IOUTMAX | 200 | mA | VIN=VOUT(T)-2.0V, VOUT(T)≦-2.4V | 6 | ||
| Load Regulation | ΔVOUT | 20 | 60 | mV | VIN=VOUT(T)-1.0V, VOUT(T)≦-3.0V; 1mA≦IOUT≦100mA | 6 | |
| Dropout Voltage (max from E-1 chart at VOUT(T)=-5.00V) | Vdif | 114 | mV | IOUT=20mA; E-1 dropout chart, VOUT(T)=-5.00V | 7 | ||
| Supply Current | IBIAS | 100 | 200 | μA | VIN=-14.5V, VCE=1.5V, IOUT=0mA | 6 | |
| Stand-by Current | ISTB | 0.01 | 0.1 | μA | VIN=-14.5V, VCE=0V, IOUT=0mA | 6 | |
| Input Line Regulation | ΔVOUT/(ΔVIN・VOUT) | 0.01 | 0.2 | %/V | -14.5V~VOUT(T)-1V, VOUT(T)≦-1.4V; IOUT=20mA | 6 | |
| Input Voltage | VIN | -2.4 | V | Printed minimum is -16+VCE (expression, not a numeric value) | 6 | ||
| Output Voltage Temperature Characteristics | ΔVOUT/(ΔTopr・VOUT) | -50 | 50 | ppm/℃ | IOUT=20mA, -40℃≦Topr≦85℃ | 6 | |
| Limit Current | ILIM | 210 | 300 | mA | VIN=VOUT(T)-2.0V, VOUT(T)≦-2.4V | 6 | |
| CE "H" Level Voltage | VCEH | 1.2 | 3.6 | V | 6 | ||
| CE "L" Level Voltage | VCEL | 0.4 | V | Printed minimum is GND (not a numeric value) | 6 | ||
| CE "H" Level Current (XC6901D Series) | ICEH | 1.8 | 4 | 7 | μA | VIN=-12.4V, VCE=3.6V | 6 |
| CE "L" Level Current | ICEL | -0.1 | 0.1 | μA | VCE=GND | 6 | |
| CL Discharge Resistor | RDCHG | 0.7 | 1.2 | 1.8 | kΩ | VIN=-8V, VOUT=-2V, VCE=GND | 6 |
| Soft Start Time | tSS | 0.3 | 0.7 | 2 | ms | VOUT(T)≦-4.0V; RL=3kΩ, rise time CE="H" to 95% of VOUT(E) | 6 |
| Input Voltage (absolute maximum) | VIN | 0.3 | V | GND=0V, Ta=25℃; printed minimum is GND-18+VCE (expression) | 4 | ||
| Output Current (absolute maximum) | IOUT | 500 | mA | GND=0V, Ta=25℃; footnote *1: IOUT≦Pd/(VOUT-VIN) | 4 | ||
| Output Voltage (absolute maximum) | VOUT | 0.3 | V | GND=0V, Ta=25℃; printed minimum is -VIN-0.3 (expression) | 4 | ||
| Operating Ambient Temperature | Topr | -40 | 85 | ℃ | 4 | ||
| Storage Temperature | Tstg | -55 | 125 | ℃ | 4 | ||
| Power Dissipation (SOT-25, non-PCB-mounted value) | Pd | 250 | mW | GND=0V, Ta=25℃; SOT-25 row, first value in table | 4 | ||
| Power Dissipation (SOT-25, PCB mounted) | Pd | 600 | mW | SOT-25, PCB mounted, footnote *2: reference only | 4 | ||
| Power Dissipation Ripple Rejection (PSRR) | PSRR | 45 | dB | VIN={VOUT(T)-1.0}+0.5Vp-pAC, IOUT=20mA, f=1kHz | 6 | ||
| Short-Circuit Current | ISHORT | 80 | mA | VIN=VOUT(T)-2.0V, Short -VOUT to GND level | 6 | ||
| Detect Thermal Shutdown Temperature | TTSD | 150 | ℃ | IC Junction temperature | 6 | ||
| Release Thermal Shutdown Temperature | TTSR | 125 | ℃ | IC Junction temperature | 6 | ||
| Thermal Shutdown Hysteresis Width | THYS | 25 | ℃ | TTSD-TTSR | 6 | ||
| Thermal Resistance (SOT-25, board mount) | θJA | 166.67 | ℃/W | SOT-25 board mount, Tj max=125℃ | 24 |
CAD (KiCad official)
- Symbol:
XC6901D501MR-G - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-25-5 (KiCad packages3D, STEP)
- 3D model files:
xc6901d501mr-g-etched.step/xc6901d501mr-g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xc6901d501mr-g.step/xc6901d501mr-g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Torex Semicon datasheet (28 pp, sha256
66e95ece943c7233, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# XC6901D501MR-G
**Torex Semicon** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-25-5
XC6901D501MR-G from Torex Semicon, in a SOT-25-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference pin; all absolute maximum ratings and electrical characteristics are specified with GND = 0V. |
| 2 | -VIN | power_in | Negative supply input; the datasheet gives an input range of -2.4V to -12.4V (VCE = 3.6V) and an absolute maximum range of GND-18+VCE to GND+0.3V. |
| 3 | CE | input | ON/OFF control, active high: a level of 1.2V to 3.6V enables the regulator, GND to 0.4V puts it in stand-by, and an open pin also gives stand-by due to the internal pull-down; the absolute maximum CE voltage is GND-0.3V to VIN+18V. |
| 4 | NC | unconnected | No connection. |
| 5 | -VOUT | power_out | Negative regulated output (-5.0V nominal for this -5.0V part) with a maximum output current of 200mA; the absolute maximum output voltage range is -VIN-0.3V to GND+0.3V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Torex Semicon |
| Package | SOT-25-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (accuracy, VOUT(E)/VOUT(T), multiplier as printed) | VOUT(E) | 0.985 | | 1.015 | ×VOUT(T) | VOUT(T)<-2.0V, IOUT=20mA (printed as ×0.985 MIN, ×1.015 MAX) | 6 |
| Maximum Output Current | IOUTMAX | 200 | | | mA | VIN=VOUT(T)-2.0V, VOUT(T)≦-2.4V | 6 |
| Load Regulation | ΔVOUT | | 20 | 60 | mV | VIN=VOUT(T)-1.0V, VOUT(T)≦-3.0V; 1mA≦IOUT≦100mA | 6 |
| Dropout Voltage (max from E-1 chart at VOUT(T)=-5.00V) | Vdif | | | 114 | mV | IOUT=20mA; E-1 dropout chart, VOUT(T)=-5.00V | 7 |
| Supply Current | IBIAS | | 100 | 200 | μA | VIN=-14.5V, VCE=1.5V, IOUT=0mA | 6 |
| Stand-by Current | ISTB | | 0.01 | 0.1 | μA | VIN=-14.5V, VCE=0V, IOUT=0mA | 6 |
| Input Line Regulation | ΔVOUT/(ΔVIN・VOUT) | | 0.01 | 0.2 | %/V | -14.5V~VOUT(T)-1V, VOUT(T)≦-1.4V; IOUT=20mA | 6 |
| Input Voltage | VIN | | | -2.4 | V | Printed minimum is -16+VCE (expression, not a numeric value) | 6 |
| Output Voltage Temperature Characteristics | ΔVOUT/(ΔTopr・VOUT) | -50 | | 50 | ppm/℃ | IOUT=20mA, -40℃≦Topr≦85℃ | 6 |
| Limit Current | ILIM | 210 | 300 | | mA | VIN=VOUT(T)-2.0V, VOUT(T)≦-2.4V | 6 |
| CE "H" Level Voltage | VCEH | 1.2 | | 3.6 | V | | 6 |
| CE "L" Level Voltage | VCEL | | | 0.4 | V | Printed minimum is GND (not a numeric value) | 6 |
| CE "H" Level Current (XC6901D Series) | ICEH | 1.8 | 4 | 7 | μA | VIN=-12.4V, VCE=3.6V | 6 |
| CE "L" Level Current | ICEL | -0.1 | | 0.1 | μA | VCE=GND | 6 |
| CL Discharge Resistor | RDCHG | 0.7 | 1.2 | 1.8 | kΩ | VIN=-8V, VOUT=-2V, VCE=GND | 6 |
| Soft Start Time | tSS | 0.3 | 0.7 | 2 | ms | VOUT(T)≦-4.0V; RL=3kΩ, rise time CE="H" to 95% of VOUT(E) | 6 |
| Input Voltage (absolute maximum) | VIN | | | 0.3 | V | GND=0V, Ta=25℃; printed minimum is GND-18+VCE (expression) | 4 |
| Output Current (absolute maximum) | IOUT | | | 500 | mA | GND=0V, Ta=25℃; footnote *1: IOUT≦Pd/(VOUT-VIN) | 4 |
| Output Voltage (absolute maximum) | VOUT | | | 0.3 | V | GND=0V, Ta=25℃; printed minimum is -VIN-0.3 (expression) | 4 |
| Operating Ambient Temperature | Topr | -40 | | 85 | ℃ | | 4 |
| Storage Temperature | Tstg | -55 | | 125 | ℃ | | 4 |
| Power Dissipation (SOT-25, non-PCB-mounted value) | Pd | | | 250 | mW | GND=0V, Ta=25℃; SOT-25 row, first value in table | 4 |
| Power Dissipation (SOT-25, PCB mounted) | Pd | | | 600 | mW | SOT-25, PCB mounted, footnote *2: reference only | 4 |
| Power Dissipation Ripple Rejection (PSRR) | PSRR | | 45 | | dB | VIN={VOUT(T)-1.0}+0.5Vp-pAC, IOUT=20mA, f=1kHz | 6 |
| Short-Circuit Current | ISHORT | | 80 | | mA | VIN=VOUT(T)-2.0V, Short -VOUT to GND level | 6 |
| Detect Thermal Shutdown Temperature | TTSD | | 150 | | ℃ | IC Junction temperature | 6 |
| Release Thermal Shutdown Temperature | TTSR | | 125 | | ℃ | IC Junction temperature | 6 |
| Thermal Shutdown Hysteresis Width | THYS | | 25 | | ℃ | TTSD-TTSR | 6 |
| Thermal Resistance (SOT-25, board mount) | θJA | | 166.67 | | ℃/W | SOT-25 board mount, Tj max=125℃ | 24 |
## CAD (KiCad official)
- Symbol: `XC6901D501MR-G`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-25-5 (KiCad packages3D, STEP)
- 3D model files: `xc6901d501mr-g-etched.step` / `xc6901d501mr-g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `xc6901d501mr-g.step` / `xc6901d501mr-g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Torex Semicon datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8602995587507896320) (28 pp, sha256 `66e95ece943c7233`, retrieved 2026-10-18, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/xc6901d501mr-g-datasheet.pdf)