Generated by kicad-footprint-generator · KiCad file format 20260206
XC6366A333MR
Torex Semicon · DC-DC Controllers · SOT-25
XC6366A333MR from Torex Semicon, in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EXT/ | output | External transistor connection drives the gate of the external transistor; EXT/ pin voltage is limited to -0.3 to VIN+0.3 V with EXT/ pin current of ±100 mA maximum. |
| 2 | VDD | power_in | Power supply input with an input voltage range of 2.2 V to 10 V and an absolute maximum VDD pin voltage of -0.3 to +12 V. |
| 3 | GND | power_in | Ground reference pin for the controller; all voltages are ground standardized to this pin. |
| 4 | CE | input | Chip enable input (CE pin Low puts the device in stand-by with current below 0.5 μA) that also serves as the soft-start capacitor connection for the externally set-up types C and D. |
| 5 | VOUT | input | Output voltage monitor pin for internally set VOUT types and feedback input for externally set FB types (B, D), with a voltage range of -0.3 to VIN+0.3 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Torex Semicon |
| Package | SOT-25 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN Pin Voltage | VDD | -0.3 | 12 | V | Ta = 25℃ | 5 | |
| VOUT Pin Voltage | VOUT | -0.3 | V | Ta = 25℃; max VIN+0.3 | 5 | ||
| FB Pin Voltage | VFB | -0.3 | V | Ta = 25℃; max VIN+0.3 | 5 | ||
| CE Pin Voltage | VCE | -0.3 | V | Ta = 25℃; max VIN+0.3 | 5 | ||
| EXT/ Pin Voltage | VEXT/ | -0.3 | V | Ta = 25℃; max VIN+0.3 | 5 | ||
| EXT/ Pin Current | IEXT/ | -100 | 100 | mA | Ta = 25℃ | 5 | |
| Power Dissipation (SOT-25) | Pd | 150 | mW | Ta = 25℃ | 5 | ||
| Operating Temperature Range | Topr | -30 | 80 | ℃ | 5 | ||
| Storage Temperature Range | Tstg | -40 | 125 | ℃ | 5 | ||
| Output Voltage | VOUT | 3.218 | 3.3 | 3.383 | V | 5 | |
| Maximum Input Voltage | VIN | 10 | V | 5 | |||
| UVLO Voltage (Minimum Operating Voltage) | VUVLO | 0.9 | 2.2 | V | Same as IDD1; voltage which EXT/pin voltage holding H level | 5 | |
| Supply Current 1 | IDD1 | 57 | 102 | μA | No external components, CE=VDD, VOUT=0V | 5 | |
| Supply Current 2 (XC6366) | IDD2 | 15 | 27 | μA | CE=VOUT=VDD; XC6366 | 5 | |
| Stand-by Current | ISTB | 0.5 | μA | No external components, CE=VOUT=0V | 5 | ||
| Oscillation Frequency | fOSC | 255 | 300 | 345 | kHz | Measuring of EXT/ waveform; VIN=output voltage + 0.1V | 5 |
| Maximum Duty Ratio | MAXDTY | 100 | % | 5 | |||
| PFM Duty Ratio | PFMDTY | 15 | 25 | 35 | % | No load (XC6366 only) | 5 |
| CE High Voltage | VCEH | 0.65 | V | No external components, VOUT=0V; voltage which EXT/pin voltage holding L level | 5 | ||
| CE Low Voltage | VCEL | 0.2 | V | No external components, VOUT=0V; voltage which EXT/pin voltage holding H level | 5 | ||
| EXT High ON Resistance | REXTBH | 16 | 22 | μA | Same as IDD2, VEXT/=VDD-0.4V | 5 | |
| EXT Low ON Resistance | REXTBL | 14 | 19 | μA | Same as IDD1, VEXT/=0.4V | 5 | |
| Efficiency | EFFI | 92 | % | Use of a XP162A12A6 transistor recommended | 5 | ||
| Soft-Start Time | tSS | 5 | 10 | 20 | ms | Connect RSS, CSS, CE, 0V→3.0V (When VIN≦3.0V, VIN=3.0V) | 5 |
CAD (KiCad official)
- Symbol:
XC6366A333MR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-25 (KiCad packages3D, STEP)
- 3D model files:
xc6366a333mr-etched.step/xc6366a333mr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xc6366a333mr.step/xc6366a333mr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Torex Semicon datasheet (23 pp, sha256
96889c51193336ac, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).